• 한국의류학회지
• /
• 제37권6호
• /
• pp.764-771
• /
• 2013

The metal component of Chinese and Korean traditional gold thread was analyzed nondestructively using P-XRF and classified morphologically. In the nondestructive analysis of 22 Chinese and Korean artifacts, there were 10 gold threads made up of Au in China and 7 in Korea; in addition, there were 4 silver threads made up of Ag in Korea and 1 copper thread made up of Cu in China. In the morphological classification, 7 gilt paper strips were confirmed in China and Korea and 4 wrapped threads were identified in China and Korea. Zn, Sn and Fe (minor components of the threads) were detected. These components were assumed to be transferred from the metal found in burial goods.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.439-449
• /
• 2002

This paper reviews our recent research works on the interconnection technologies in electronic packaging and assembly. At the aspect of advanced joining methods, laser-ultrasonic fluxless soldering technology was proposed. The characteristic of this technology is that the oxide film was removed through the vibration excitated by high frequency laser change in the molten solder droplet. Application researches of laser soldering technology on solder bumping of BGA packages were carried out. Furthermore, interfacial reaction between SnPb eutectic solder and Au/Ni/Cu pad during laser reflow was analyzed. At the aspect of soldered joints' reliability, the system for predicting and analyzing SMT solder joint shape and reliability(PSAR) has been designed. Optimization design method of soldered joints' structure was brought forward after the investigation of fatigue failure of RC chip devices and BGA packages under temperature cyclic conditions with FEM analysis and experimental study. At the aspect of solder alloy design, alloy design method based on quantum was proposed. The macroproperties such as melting point, wettability and strength were described by the electron parameters. In this way, a great deal of the experimental investigations was replaced, so as to realize the design and research of any kinds of solder alloys with low cost and high efficiency.

• 복식문화연구
• /
• 제6권1호
• /
• pp.58-70
• /
• 1998

The color difference value of fabrics dyed with browning extracts from mushroom were as follows. 1. Two hours of dyeing depending on pH at 95℃ exhibited colors of YR and Y. The color of wool and nylon was darkest brown at pH 4, but light brown or yellow as pH increased. The color of silk was darkest brown at pH 5 and pH changes resulted in the same tendency as in wool. 2. In wool the color was changed to darker brown as time prolonged, however, there was no further color change after 9hr and value and chroma of wool declined. 3. At pH 4, the increase in temperature turned colors of sil, wool and nylon into dark brown from light yellow. 4. As the result of repetitive dyeing, colors of silk, wool and nylon gradually turned into darker brown. The repetitive dyeing was more effective in dark color and high colorfastness compared to a prolonged dyeing. 5. The amount of mordant resulted in color changes between light yellow and dark brown without various color changed. 6. In color change according to methods of mordant, post-mordant with CuSO₄·5H₂O and with SnCl·2H₂O showed colors of green and light yellow, respectively.

• 복식문화연구
• /
• 제16권1호
• /
• pp.158-165
• /
• 2008

The purpose of this study was to investigate the dyeing property and ultraviolet-cut ability on silk 100% and nylon 100% fabrics dyed with Rhus verniciflua extracts. This study was investigated K/S values, surface color, washing fastness, dry cleaning fastness and ultraviolet-cut ability of the silk and nylon fabrics dyed with Rhus verniciflua extracts under the various dyeing conditions. As mordanting were used Tin(II) Chloride dihydrate $(SnCl_2{\cdot}2H_2O)$, Copper(II) sulfate pentahydrate$(CuSO_5{\cdot}5H_2O)$, Iron(II)Chloride$(FeC_2{\cdot}4H_2O)$. pH was adjusted by sodium carbonate$(Na_2CO_3)$ and formic acid(HCOOH). The optimum dyeing temperature, dyeing time, and pH of the silk fabrics dyed with Rhus verniciflua extracts were $90^{\circ}C$, 100min, and in the nylon fabrics were $90^{\circ}C$, 45min. It were colored(munsell value) 6.4Y 7.5/4.1 in the silk fabrics and colored 4.3Y 6.6/5.9 in the nylon fabrics dyed with Rhus verniciflua extracts. Washing fastness and dry-cleaning fastness in the silk and nylon fabrics dyed with mordanting agent improved in $4{\sim}5$ grade. UV-A test showed that nylon fabrics a high rate of 92% with Rhus verniciflua extracts.

• 한국재료학회지
• /
• 제15권1호
• /
• pp.54-60
• /
• 2005

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. ion migration phenomena has been observed in the field of exposing the specific environment and using for a long tin e. This study was evaluated the generation time of ion migration and was investigated properly test method through water drop test and high temperature high humidity test. Also we observed direct causes and confirmed generation mechanism of dendritic growth as we reproduced the ion migration phenomena. We utilized PCB(printed circuit board) having a comb pattern as follows 0.5, 1.0, 2.0 mm pattern distance. Cu, SnPb and Au were electroplated on the comb pattern. 6.5 V and 15 V were applied in the comb pattern and then we measured the electrical short time causing by ion migration. In these results, we examined a difference of ion migration time depending on pattern materials, applied voltage and pattern spacing of PCB conductor.

• 보존과학회지
• /
• 제37권4호
• /
• pp.340-356
• /
• 2021

We have tried the experimental research of lost-wax casting to reconstruct Gilt-Bronze Pensive Bodhisattva; preliminary and reconstruction experiment based on ancient texts. Main object to reconstruct is Korean National Treasure No.83, Gilt-Bronze Pensive Bodhisattva (Maitreya), then we measure alloy ratio and casting method based on the scientific analysis. Other impurities were removed from the base metal components(copper : tin : lead) and their ratio was set to 95.5 : 6.5 : 3 where the ratios for tin and lead were increased by 2.5% each. The piece-mold casting method was used, and piece-mold casting experiments were carried out twice in this study but supplementary research on piece-mold casting was necessary. The microstructure was confirmed to be typical cast microstructure and the component analysis result was similar to that of the prior study. Analysis of the chemical composition is confirmed to copper, tin, lead, and zinc, and the chemical composition of the matrix was 87.8%Cu-7.5%Sn-2.7%Pb-2.1%Zn, and similar to previous experimental research. Also resulted in the detection of small impurity in Zn. Analysis of the mould revealed that the mould was fabricated by adding quartz and organic matter for structural stability, fire resistance, and air permeability. We expect that our research will contribute to provide base data for advanced researches in future.

• 대한가정학회지
• /
• 제41권2호
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.476-485
• /
• 2015

The purpose of this research is to analyze the effects of persimmon juice and hibiscus flowers extract to perform combination dyeing of silk fabrics, with respect to color changes, fastness, and functionality. The optimal conditions as a result, were shown at 100% of dye concentration, $40^{\circ}C$ of dyeing temperature and 30 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and methods. The highest K/S value was recorded at pH 3, pre-mordants of $CuSO_4$, and $SnCl_2$, post-mordanting. After repeated dyeing and post-mordanting, various color change occurred with mordant treatments. Color fastness of dyed fabrics with hibiscus flowers extract was improve considerably by combination dyeing with persimmon juice extract. In aspects of functional properties, it showed excellent results of 99% deodorization rate, 99.9% Staphylococcus aureus rate and 99.9% Klebsiella pneumoniae.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.210-218
• /
• 2018

The natural dye product market is expanding due to the recent interest in environmentally friendly products. This study examines dyeing using natural Coptidis Rhizoma. Chitosan and Tannin was treated to improve dyeability of Coptidis Rhizoma after finding the proper dyeing condition. In addition, dyeing characteristics were compared according to mordant types along with the mordanting methods for dye fixing and color change. The results indicated that the optimum dyeing condition was to treat the concentration of 5% (o.w.b.) at $80^{\circ}C$ for 90 minutes. By the chitosan and tannin treatments, K/S value of cotton fabrics by 3 times and those of wool fabrics by 2 times increased and color depthing of dyed fabrics was achieved after 2 cycles repetition. To improve dyeability, iron mordanting was most effective; in addition, the K/S Value of pre-mordanting fabrics versus post-mordanting fabrics increased the most. The color of the surface was changed to reddish yellow when Sn, Cu mordanting, and to greenish blue when Fe mordanting. The lightfastness of dyeing fabric with mordanting was weak at 1-2 grades, but the washing fastness was good for 4 grades and the rubbing fastness and sweat fastness were as good as those of the 3-4 grades. As a result, this study could help improve the dyeability of expensive Coptidis Rhizoma.

• 자원환경지질
• /
• 제21권3호
• /
• pp.209-221
• /
• 1988

The ore deposit of the Ohtani mine is one of repesentatives of plutonic tungsten-tin veins related genetically to acidic magmatism of Late Cretaceous in the Inner zone of Southwest Japan. Based on macrostructures of vein filling on the order of ore body, three major mineralization stages, called stage I, stage II, and stage ill from earliest to latest, are distinguished by major tectonic breaks. The alteration zories are characterized by specific mineral associations in pseudomorphs after biotite. The alteration zones can be divided into two parts, i. e. a chlorite zone and a muscovite zone, each repesenting mineralogical and chemical changes produced by the hydrothermal alteration. The chloritic alteration took place at the beginning of mineralization, and muscovite alteration in additions to chloritic alteration took place at stage II and ill. The alteration zones are considered to be formed by either of two alteration mechanism. 1) The zones are formed by reaction of the rock with successive flows of solution of different composition and different stage. 2) The zones are formed contemporaneously as the solution move outward. Reaction between the solution and the wall-rock results in a continuous change in solution chemistry. The migration of the successive replacement of the fresh zone$\rightarrow$the chlorite zone$\rightarrow$the muscovite zone may have transgressed slowly veinward, leaving metasomatic borders between the different zones.