• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.307-310
• /
• 2004

Micellar enhanced ultrafiltration (MEUF) is a surfactant-based separation process and it can remove heavy metal ions from aqueous stream effectively. However, it is necessary to recover and reuse surfactants for economic feasibility because surfactant is expensive. Foam fractionation was investigated for both anionic and cationic surfactant recovery. Chelating agent such as ethylenediaminetetraacetic acid (EDTA) was studied for the separation of heavy metals from surfactant solution. Anionic surfactants bound with heavy metals can be recovered by lowering pH (acidification). In this study, citric acid and imminodiacetic acid (IDA) were applied to release copper from sodium dodecyl sulfate (SDS) micellar solution and compared with EDTA. Precipitation of copper by ferricynide and sodium sulfide were also investigated. As a result, ca. 100 % of copper was released from SDS micellar solution by 5 mM of EDTA and citric acid. And 3.3 mM of ferricyanide formed precipitate with 82.7 % of copper. 5 mM of IDA and sodium sulfide released or formed precipitate 82.5 % and 58.9 % of copper, respectively. Citric acid is harmless to environments and ferricyanide precipitates with Cu easily. Therefore, it is considered that citric acid and ferricyanide have competiveness over a famous chelating agent, EDTA, for the separation of Cu from SDS solution.

• Korean Journal of Plant Resources
• /
• v.23 no.6
• /
• pp.519-525
• /
• 2010

Chlorogenic acid, formed of an ester of caffeic acid and quinic acid, which is naturally abundant in many plant species, was used as a model O-dihydoxy phenolic compound. In the previous study, we have reported that the isolated constituent from Apocynum venetum leaves has an inhibitory effect on $Cu^{2+}$-induced oxidative modification of low-density lipoprotein (LDL). Among them, chlorogenic acid showed the most potent anti-LDL oxidative activity than other compounds. For the reason, we investigated the inhibitory effect of the chlorogenic acid on $Cu^{2+}$-induced oxidative modification of LDL, monitored a lag time in the conjugated-diene formation and TBARS formation, and measured TNBS free amino acid group, and form cell formation in vitro system. The TBARS- and diene- formation were strongly inhibited by chlorogenic acid ($0{\sim}100\;{\mu}g/ml$) with dose dependent manner. On the other hand, TNBS reactive lysine amino groups on LDL oxidation were protected by chlorogenic acid- treated cell group. Therefore, chlorogenic acid inhibited to cholesterol accumulation in the isolated peritoneal macrophage.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.270-276
• /
• 2010

Nickel-copper foam electrodes with pore gradient micro framework and nano-ramified wall have been prepared by using an electrochemical deposition process. Growth habit of nickel-copper co-deposits was quite different from that of pure nickel deposit. In particular, the ramified structure of the individual particles was getting clear with chloride ion content in the electrolyte. The ratio of nickel to copper in the deposits decreased with the distance away from the substrate and the more chloride ions in the electrolyte led to the more nickel content throughout the deposits. Compositional analysis for the cross section of a ramified branch, together with tactical selective copper etching, proved that the copper content increased with approaching central region of the cross section. Such a composition gradient actually disappeared after heat treatment. It is anticipated that the pore gradient nickel-copper nanostructured foams presented in this work might be a promising option for the high-performance electrode in functional electrochemical devices.

• Journal of the Korean Chemical Society
• /
• v.58 no.3
• /
• pp.283-288
• /
• 2014

A column solid phase extraction procedure based on modified polyurethane foam (PUF) by a newly synthesized Schiff base ionophore, named 2,2'-{iminobis[propane-3,1-diylnitrilo(1E)prop-1-yl-1-ylidene]}diphenol, was developed for preconcentration step of trace amounts determination of copper ions in water samples by atomic absorption flame spectroscopy. The influence of parameters on the adsorption process such as sample pH, amount of modified PUF packed in the column, type and volume of stripping reagent and its flow rate were investigated and optimized. Under optimum experimental conditions, the calibration graph was linear in a relatively wide range ($0.005-210{\mu}g/ml$) with a limit of detection $0.002{\mu}g/ml$ of copper. The proposed method allows achieving to a concentration factor of >133. The capacity of a column (1.6 cm i.d.) packed by 6 g of PUF modified by 12 mg of the Schiff base was found to be $247.7({\pm}2.1){\mu}g$ of copper. It was found that the adsorption process was highly selective towards copper ions with respect to some associated metal ions. The presented procedure was successfully applied for determination of copper in some water samples.

• 보존과학연구
• /
• s.27
• /
• pp.23-42
• /
• 2006

This study is about gilt bronze ornament, that is from Deok Cheon-Ri in Gyeong Ju, of conservation treatment process and of scientific analysis. This relic gathered with soil around the relic by Polyurethane foam. While the relic got rid of soil, Took X-rays. As the result, we decided to process reconstruction as condition that the relic was dug up. After the conservation treatment processed, we made a frame to display the relic. Investigated manufacture techniques of the relic after the conservation treatment processed, and thenexecuted scientific analysis of the relic for a chemical experiment. A analysis of the results of components for composition layers using the SEM-EDS can be briefly summarized as below; Firstly, the average contents of outer, inner and body corrosion layer have a Cu-60.9~39.3wt% and analyzed a little impurities material which is Fe-0.5wt%.Secondly, the average contents of body have a Cu-99.7wt% which was using manufactured by pure copper. Thirdly, gold layer have a mercury of 9.5wt% which indicate that layer was manufactured by mercury amalgam gilding technique.

• Korean Journal of Poultry Science
• /
• v.16 no.1
• /
• pp.17-22
• /
• 1989

In order to dull heat sensitivity of egg albumen, metal ions (aluminium, ferric, ferrous, copper) were added and functional properties or egg albumen were determined before and after heat treatment at $60^{\circ}C$ for 5 minutes. Effect of pH on heat sensitivity of aluminium salt added egg albumen was also determined. Addition of metal ions increased turbidity of egg albumen before and after the heat treatment. Changes of the turbidity were minimized by addition of aluminium salt. The foaming power was markedly increased by addition of ferric salt before the heat treatment and increased by addition of aluminium, ferric and copper salt after the heat treatment. Before the heat treatment the foam was stable by addition of ferric and ferrous salt but after the heat treatment it was stable by addition of aluminium and ferric salt. The turbidity and foaming property of the egg albumen with aluminium salt were not largely changed after the heat treatment at pH range 7 to 8.5. Over pH 9 the turbidity and foaming power were not decreased, but the foam stability was increased before and after the heat treatment. Salmonella typhimurium ATCC 14028 (10$^{6}$ cells/$m\ell$) inoculated in egg albumen at pH range 7 to 8.5 was destructed by the heat treatment.

• Journal of Sasang Constitutional Medicine
• /
• v.24 no.4
• /
• pp.51-61
• /
• 2012

Objectives : The purpose of this study was to investigate the anti-atherosclerotic effects of 4 herbal formulas for Sasang constitutional medicine (Yeoldahanso-tang: YDHST, Yanggyeoksanhwa-tang: YGSHT, Cheongsimyeonja-tang: CSYJT and Taeeumjowi-tang: TEJWT). Methods : The antioxidant activities of herbal formulas were studied by measuring free radical scavenging activities on ABTS and DPPH. The inhibitory effects on LDL oxidation was evaluated by the formation of TBARS, REM and fragmentation of apolipoprotein B-100 (ApoB). Effects of herbal formulas on macrophage lipid accumulation were determined in native LDL and LPS co-incubated macrophages using Oil Red O staining. Results : The scavenging activities on ABTS and DPPH of herbal formulas were increased in dose-dependent manner (YDHST>YGSHT>CSYJT>TEJWT). Herbal formulas reduced the oxidation properties of LDL induced by $CuSO_4$. YDHST, YGSHT and CSYJT showed strong suppressive effect on LDL oxidation than TEJWT. In addition, YDHST, YGSHT and CSYJT significantly inhibited foam cell formation in LDL/LPS stimulated RAW 264.7 cells. Conclusions : These results demonstrate that YDHST, YGSHT and CSYJT have potentials on anti-atherosclerosis by antioxidative effect and suppressive effect on LDL oxidation.

• Journal of Microbiology
• /
• v.43 no.3
• /
• pp.301-307
• /
• 2005

The feasibility of laccase production by immobilization of Pleurotus ostreatus 1804 on polyurethane foam (PUF) cubes with respect to media composition was studied in both batch and reactor systems. Enhanced laccase yield was evidenced due to immobilization. A relatively high maximum laccase activity of 312.6 U was observed with immobilized mycelia in shake flasks compared to the maximum laccase activity of free mycelia (272.2 U). It is evident from this study that the culture conditions studied, i.e. biomass level, pH, substrate concentration, yeast extract concentration, $Cu^{2+}$ concentration, and alcohol nature, showed significant influence on the laccase yield. Gel electrophoretic analysis showed the molecular weight of the laccase produced by immobilized P. ostreatus to be 66 kDa. The laccase yield was significantly higher and more rapid in the packed bed reactor than in the shake flask experiments. A maximum laccase yield of 392.9 U was observed within 144 h of the fermentation period with complete glucose depletion.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.203-214
• /
• 2014

We measured the contact dermatitis-causing substances concentrations in 28 commercial oxidative hair-coloring products. This study was aimed to provide the fundamental data about oxidative hair-coloring products. We selected 10 oxidation dyes (p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol) and 4 heavy metal (nikel; Ni, chromium; Cr, cobalt; Co, copper; Cu) as contact dermatitis-causing substances. To identify 10 oxidation dyes, hexane-2% sodium sulfite was used for the rapid and simple extraction and ultra performance liquid chromatography (UPLC) analysis was used for simultaneous analysis in 12 minutes. 10 oxidative dyes were detected as indicated on the product packaging and each concentration was lower than prescribed upper concentration limit by pharmaceutical manufacturing standards. And we analysed inductively coupled plasma-optical emission spectrophotometer (ICP-OES) for content search of heavy metal after microwave digestion. The heavy metal average concentration in oxidative hair-coloring products was 0.572 ${\mu}g/g$ for Ni, 3.161 ${\mu}g/g$ for Cr, 2.029 ${\mu}g/g$ for Co, 0.420 ${\mu}g/g$ for Cu, respectively. The average of concentration in powder type (henna) was higher than those of other foam and cream type oxidative hair-coloring products as follows; 1.800 ${\mu}g/g$ for Ni, 10.127 ${\mu}g/g$ for Cr, 7.082 ${\mu}g/g$ for Co, 1.451 ${\mu}g/g$ for Cu. Hair coloring products were classified into the six colors - black, dark brown, brown, dark brown, light brown, red brown and analyzed. Brown color had the highest average concentration of Co and the others had the highest average concentration of Cr.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2019

Here, we present a facile route to fabricate a vertically stacked 3D porous structure-based triboelectric nanogenerator (TENG) that can be used to harvest energy from the friction in a repetitive contact-separation mode. The unit component of TENG consists of thin Al foil electrodes integrated with microstructured 3D foams such as Ni, Cu, and polyurethane (PU), which provide advantageous tribo-surfaces specifically to increase the friction area to the elastomeric counter contact surfaces (i.e., polydimethylsiloxane, PDMS). The periodic contact/separation-induced triboelectric power generation from a single unit of the 3D porous structure-based TENG was up to $0.74mW/m^2$ under a mild condition. To demonstrate the potential applications of our approach, we applied our TENGs to small-scale devices, operating 48 LEDs and capacitors. We envision that this energy harvesting technology can be expanded to the applications of sustainably operating portable electronic devices in a simple and cost-effective manner by effectively harvesting wasted energy resources from the environment.