• Korean Journal of Microbiology
• /
• v.23 no.1
• /
• pp.69-76
• /
• 1985

This study was carried out to observe the formation of superoxide radicals and the changes in the activities of superoxide dismutase (EC.1.15.1.1.) from the various organs of a rat which was blocked tricarboxylic acid cycle. In order to block the tricarboxylic acid cycle, the beta-fluoroethylacetate was injected into peritoneal cavity of rat and removed the various tissues from the rat at internals of an hour. By tissue extracts being prepared by the method of Weigiger and Fridovich the activities of superoxide dismutase, aconitase, and contents of bliid glucose, citrates, and wuperoxide radicals were determined. The experimental results are summarized as follows: Accumulation of citrates if increased within three hours after treatment in the all tested tissues, especially, in the geart and spleen they are higher than one of other tissues as 12 and 20 times of control. The activities of aconitase are ingibited to 30-35% on an hour after beta-fluoroethylacetate treatment comparing with that of control rat. The content of blood glucose is increased to 1.6 fold of normal value after 5 hours of treatment. In all tested tissues, superoxide radicals are formed in the heart as 0.26 micromoles per gram tissue between one and three hours after treatment. The activities of total superoxide dismutase are increased between one and three hours after treatment in the all tested tissues and one of these enzymes in heart is highest. The activities of superoxide dismutase containing Mn are also increased with an increase of total superoxide dismutase activities.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.233-239
• /
• 2017

Objectives: The pollution status of heavy metals within the soil was investigated with an aim to establishing a sustainable soil environment within parks and amusement facilities installed in urban areas of Gyeonggi-do Province. Methods: As sampling sites, 14 locations were selected from a city with a number of factories near a residential area, a residential area, and a children's park in a city with mixed green areas. Seven kinds of heavy metals, including Cd, Pb, and Hg, and the pH of soil were analyzed three times by inductively coupled plasma optical emission spectroscopy (ICP-OES) and atomic absorption spectrometer (AAS). Results: In this study, the pH of the samples from the residential park and industrial park showed 5.7-6.5 and 5.9-7.0, respectively. The overall mean concentration (mg/kg) of heavy metals was Zn (132.8), Ni (73.0), Cu (47.4), Pb (35.9), As (4.84), Cd (0.39), and Hg (0.07), indicating that these concentrations of heavy metals were lower than those for the area 1 standard of soil pollution concern criteria. In addition, the sampling sites in the residential area and the industrial area also showed the same tendency for concentration distribution. Conclusions: We found that the soil pollution class (SPC) of some spots were over 200, which are third and fourth classes. In order to manage a sustainable soil environment in a city park, it is suggested that local governments, the management bodies for these parks, need to manage, supervise, and investigate soil pollution and quickly replace contaminated soil.

• Culinary science and hospitality research
• /
• v.15 no.3
• /
• pp.284-293
• /
• 2009

This study investigated chemical composition and antioxidant activity in the aerial parts or roots of Korean and Chinese Cirsium. Water was abundant in their roots than their aerial parts, and its content was similar between Korean Cirsium and Chinese one. Ash was abundant in the aerial parts of Korean one. Protein was abundant in the aerial parts of Korean one and the roots of Chinese one. Lipid content was abundant in the roots of Chinese one. Carbohydrate was abundant in the roots of Korean one while K content was abundant in the roots of Chinese one. Ca and Mg contents were abundant in the aerial parts of Korean one. P and Fe contents were abundant in the aerial parts of Korean one. Cu content was abundant in the aerial parts of Korean and Chinese ones. Vitamin A and vitamin C were not detected, but vitamin E and $\beta$-carotene were contained 5.35 IU/100 g, 1113.18 ${\mu}g$/100 g in the aerial parts of Korean one. Yield, total phenolics and total flavonoid contents were abundant in the roots of Korean one. Silymarin, cynarin, and narirutin were not detected in Korean and Chinese ones, but apigenin was identified in the aerial parts of Korean one. Acacetin was identified in the roots of Chinese one. Antioxidant activity was low in Korean and Chinese ones. These results suggest that nutrition composition, total phenolic content, total flavonoid content and apigenin content in the aerial parts of Korean Cirsium was superior than those in the roots of Korean and Chinese Cirsium.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.460-473
• /
• 2017

In order to certificate the contamination assessment of heavy metals in surface sediments from the Nakdong river. Surface sediments were collected of 24 sampling sites (main 14st., tributary 10st.) and analyzed for grain size heavy metals contents. Study area mainly composed of sand (avg. 94.1%) and mean grain size was $1.46{\Phi}$ on average. Heavy metals contents (avg. Al: 12.5%, Zn; 74.4, Cr: 45.3, Li: 26.0, Pb: 17.1, Ni: 10.5, Cu: 7.8, Cd: 0.22 mg/kg) were relatively high contents in the composed of fine sediments. In addition, the results of pearson's correlation coefficient showed that most heavy metals and grain size (silt and clay) were highly correlated. The contents of Zn (6st.) and Ni (1st.) evaluated as moderately polluted, Zn (6st.) evaluated as LEL when compared with sediment quality standard of USEPA and Ontario sediment quality guidelines. Most heavy metals contents were I levels that dose not affected the benthos when compared with sediment pollution evaluation standard of NIER. The results of EX, EF, Igeo and CF showed the contents of Zn, Pb and Cd exceed the background contents and distributing of anthropogenic pollution and evaluated as moderately polluted level. And Nm-08 were relatively high level of contamination in the study area. However as results of PLI (less than 1), all sampling sites were evaluated unpolluted level.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.1-9
• /
• 2012

According to the agreement on WTO/TBT, we are under the situation to adopt international standard (ISO standard) as a national standard if it exists. However, in case of environmental area, it is a domestic legal obligation to use Korean environmental standard method(KESM) for analyzing various contaminants. Therefore it is necessary to assess the comparability between KEM and ISO standard prior to apply ISO standard to soil conservation law in Korea. The main purpose of this study is to assess the comparability of both methods for analyzing heavy metals in soil. We looked over various aspects like pre-treatment, calibration curve range, detection wavelength, soil organic matter content and so on. Apparently, the procedure of both methods is almost same. However in details, both methods are different in stationary time before aqua-regia extraction using reflux system, calibration curve range for Cu, Pb, Ni and measuring wavelength for Pb. According to the results of comparison test, the results were significantly different when the different calibration range was used. In case that all the extracts independent of methods were reanalyzed with the same calibration range of each method, both methods showed statistically same results. Other conditions like different stationary time, measuring wavelength of AAS and soil organic matter content did not have any influence on the analytical result. Therefore, we suggest to extend the calibration curve range to 0~8 mg/L which is used in KS I ISO standard(Korean standard related with environment which is translation version of ISO standard without any technical change). In case of $Cr^{6+}$, the results showed no significant differences between two methods even though the pretreatment, instrumentation and other analysis conditions were different. In addition to UV/Visble spectrometry of KESM for soil contamination, we suggest to adopt ion chromatography of ISO 15192(US EPA method 7199) for analyzing $Cr^{6+}$ with the consideration of laboratory work efficiency.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.764-772
• /
• 2010

Staphylococcus aureus lipase is regarded as a virulence factor. The response of lipase activity to various factors can provide important insights concerning the prevention of S. aureus during meat fermentation. This study was conducted to evaluate the main effects of nutrients used in culture media, and their combined effects on the inhibition of lipase activity and cell growth of pathogenic S. aureus SK1593 isolated from fermented pork meat. A Plackett-Burman design was used to evaluate the main effects of variables, including olive oil, soybean oil, grapeseed oil, sesame oil, $CuSO_4$, $MgCl_2$, $KNO_3$, $CaCl_2$, and KCl. Significant negative effects on lipase activity were detected with soybean oil, grapeseed oil, $KNO_3$, and $CaCl_2$. Additionally, these nutrients were further selected as variables for the investigation of their combined effect on lipase activity, via response surface methodology. In order to confirm the regression model, a situation that only inhibits lipase activity was simulated. The predicted lipase activity and cell growth of the simulated situation were 14.0 U/mL and $9.6\;{\log}_{10}$ (CFU/mL), respectively, and the estimated value of those in the same medium showed 15.14 U/mL and $9.4\;{\log}_{10}$(CFU/mL) respectively. The lipase activity of the simulated medium was inhibited approximately 5-fold as compared to the basal medium, but no significant differences in cell counts were noted to exist between the basal and simulated media. These results suggest that soybean oil, grapeseed oil, $KNO_3$, and $CaCl_2$ can be used to inhibit the growth of pathogenic S. aureus during the process of meat fermentation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.243-249
• /
• 2001

Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.806-811
• /
• 2002

A 90 d study was designed to investigate the effects of rumen undegradable protein (RUP) and a mixture of Cu, Zn and Mn proteinate (CZMP) on milk yield and composition and ovarian functions during rainy months. Twenty four Holstein${\times}$ indigenous cows in their 2nd and 3rd lactation were randomly allocated to total mixed rations (TMR) containing soy bean meal (SBM) as a source of rumen degradable protein (RDP), SBM plus CZMP, and formalin treated SBM (FSBM) as a source of RUP. Maximum and minimum temperature humidity index during the experimental period were 83.6-84.7 and 75.4-76.1. There were no differences (p>0.05) in intakes of dry matter, crude protein and net energy and in contents of butterfat, lactose and minerals. Cows on TMR containing FSBM not only lost less weight (-278, -467 and -433 g/d) with more intake of RUP (0.92, 0.58 and 0.59 kg/d) but also produced more milk (19.27, 18.23 and 18.13 kg/d) and 4% fat corrected milk (18.57, 17.57 and 17.51 kg/d) with more protein (3.06, 2.81 and 2.80%), solids-not-fat (8.69, 8.38 and 8.38%) and less milk urea N (9.3, 15.4 and 15.0 mg/dl) compared with those on TMR containing SBM and SBM+CZMP, respectively (p<0.01). However, cows on TMR containing SBM and SBM+CZMP did not differ in these respects (p>0.05). Whereas incidence of cystic ovaries at 20 and 90 d pospartum was less (p<0.01) in cows on TMR containing SBM+CZMP (37.3 and 12.5%) than those on TMR containing SBM (62.5 and 25%), it was nil for cows on TMR containing FSBM. Cows in all three group differed (p<0.01) from each other for the recurrence of first observed estrus with those on TMR containing FSBM having least days (22, 36 and 47 d) compared with their counterpart on TMR containing SBM+CZMP and SBM, repectively. The results suggest that RUP is one of the limiting factors affecting milk yield and its composition and ovarian functions during early lactation of dairy cows in the tropics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.1
• /
• pp.44-52
• /
• 2020

Objective: Minerals are one of the important nutrients for supporting the growth of sheep grazing in the highland, northwest of China. The experiment was conducted to investigate the relationship of both macro and micro minerals in sheep grazing in the highlands of six districts located in the Qilian Mountain of China. Methods: Samples of herbage (n = 240) and soil (n = 240) were collected at random in a "W" shape across the area designated for harvesting from 24 farms, where the sheep commonly graze in October (winter) for mineral analyses. In addition, serum samples were taken via jugular vein from 20 sheep per farm from 24 farms (n = 480 samples in total) for serum minerals analyses. Mean values of macro and micro minerals were statistically compared among districts and the correlations among soil-plant-animal were statistically analyzed and correlations were regressed, as well. Results: The results revealed that there were variations for both macro and micro minerals among districts. Statistical analysis of the correlation coefficients between herbage and sheep were significantly different for most of the minerals but not for P, Cu, and Se. Many correlation regression coefficients were found significantly different among minerals of herbage, soil, and sheep serum especially those of K, Na, Fe, Mn, and Zn (between herbage and sheep serum), and Fe and Mn (between herbage and soil), Na, Fe, Mn, and Zn (between soil and sheep serum), respectively. The regression coefficient equations derived under this experiment for prediction of Ca (R² = 0.618), K (R² = 0.803), Mg (R² = 0.767), Na (R² = 0.670), Fe (R² = 0.865),Zn (R² = 0.950), Mn (R² = 0.936), and Se (R² = 0.630), resulted in significant R² values. Conclusion: It is inferred that the winter herbage minerals in all the districts were below the recommended levels for macro minerals which indicated there would be some mineral deficiencies in sheep grazing the herbage in these regions. Supplemental minerals may therefore play an important role in balancing the minerals available from the herbage in winter and would lead to increased productivity in sheep on the highland areas of China. These findings could be potentially applied to the other regions for improving the livestock productivity.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.