• 분석과학
• /
• 제12권2호
• /
• pp.159-165
• /
• 1999

수용액에서 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclopentadecane(NTOE)가 결합된 merrifield 수지와 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane(NDOE)가 결합된 merrifield 수지를 이용한 전이금속이온들의 흡착 및 분리특성을 조사하였다. 전이금속이온들의 흡착정도(adsorption degree, E)와 분포비(distribution ratio, D)의 순위는 동일하게 Cu(II)$t_R$)이 흡착정도와 분포비에 의해서 영향을 받았으며, 이러한 흡착 및 분리 실험 결과로부터 혼합금속용액에서 Ag(I)의 분리가능성을 확인할 수 있었다.

• 대한화학회지
• /
• 제53권6호
• /
• pp.693-703
• /
• 2009

소염제 piroxicam (PX, 4-hydroxy-2-methyl-N-2-pridyl-2H-1, 2-benzothiazine-3-carboxadiamide-1,1-dioxide)의 착물형성을 전이금속이온, Co(II), Ni(II), Cu(II), Zn(II)과 함께 메탄올(MeOH)/물 이성분 혼합물에서 25$^{\circ}C$, 일정한 pH=5.0와 I=0.1 M에서 분광광도법으로 연구하였다. 컴퓨터 프로그램 SQUAD를 스팩트라 데이터로부터 원하는 정보를 얻는데 사용하였다. Fitting 과정의 output은 안정도 상수, 평가한 안정도 상수의 표준편차, 농도분포 다아그램, 모든 종의 스팩트럼 프로파일이다. Co(II), Ni(II), Cu(II), Zn(II)의 PX 착체의 안정도 순서는 Cu(II) > Co(II) > Ni(II) ${\approx}$ Zn(II) 순서이다. 이것은 이들 금속이 온들이 기하학적 경향이 다른 이유일 것이다. PX의 산성도 상수는 다른 pH 값에서 흡수 스펙트럼으로 부터 위의 조건에서 역시 결정하였다. 컴퓨터 프로그램 DATAN을 PX의 산성도 상수의 결정하는 데 사용하였다. 산성도 상수의 validity는 잘 알려진 컴퓨터 프로그램 SPECFIT/32을 사용하였다. 안정 및 산성도 상수의 용매성질, 음이온과 같은 다른 인자의 효과에 관하여 자세하게 논의하였다.

• 대한화학회지
• /
• 제30권6호
• /
• pp.526-531
• /
• 1986

95% 메탄올 용액에서 코발트(II), 니켈(II), 구리(II)와 아연(II)이온들과 1,15-diaza-3,4:12,13-dibenzo-5,8,11-trioxacycloheptadecane (NenOdien H$_4$, L)리간드와의 안정도 상수를 전위차 적정법으로 25$^{\circ}$C 에서 결정하였다. 그 결과 착물의 형성은 리간드내의 주게원자의 영향을 받으며 안정도 상수의 크기는 Co(II) < Ni(II) < Cu(II) > Zn(II)의 순위이였다. 한편 고체착물의 구조를 분광광도법, 원소분석 및 전기전도도법의 결과로부터 논의하였다. 그 결과 고체상태의 화학조성과 기하구조는 팔면체의 $[CoL_2(OH_2)Cl]Cl{\cdot}2H_2O$, 팔면체의 $[NiL_2(OH_2)Cl]Cl{\cdot}2H_2O$, 사각피라밋형의 [CuLCl]Cl, 그리고 팔면체의 $[ZnLCl_2]{\cdot}\frac{1}{2}H_2O$임을 알 수 있었다.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.497-502
• /
• 1999

Removal of Pb(Ⅱ), Cu(Ⅱ), Cr(Ⅲ), and Zn(Ⅱ) ions from aqueous solutions using the adsorption process on domestic loess minerals has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions and leachate were experimental parameters. YDI, YPT and KRT samples diluted in 1% aquous solution which was adjusted pH 10.8, 8.0 and 6.50, respectively. The result of XRD measurement, Quartz was mainly observed in all samples. In the case of KRT sample, Kaolinite, Feldspar, Chlorite consisting of clay minerals shows almost same pattern with YPT samples. Different properties showed from the YDI sample containing Iillite, remarkably. For all the metals, maximum adsorption was observed at 30min∼60min. Adsorption of metal ions on loess minerals were reached an equilibrium by shaking the solution for about 30min. Removal efficiency of Pb(Ⅱ) ion for KRT, YPT and YDI were 84.7%, 92% and 100%, respectively. The Cu(Ⅱ) and Zn(Ⅱ) adsorptivity on KRT showed the low in various pH solution However, those on YPT and YDI were high than 90% except for the pH 2 solution. The orders of adsorptivities for domestic loess minerals showed as following : YPT>KRT>YDI. The adsorption isotherms of Cu(Ⅱ) and Zn(Ⅱ) ions on clay minerals were fitted to a Freundlich's. Freundlich constants(1/n) of KRT and YPT domestic loess minerals were 0.63, 0.97 and 0.36, 0.25, respectively.

• 대한화학회지
• /
• 제55권1호
• /
• pp.19-27
• /
• 2011

2-(Benzothiazol-2-yl)-N'-(2,5-dihydroxybenzylidene)acetohydrazide 에대한새로운일련의 Mn(II), Ni(II), Co(II), Cu(II) 및 Zn(II) 착물을 합성하여 그 특성을 원소분석, IR, UV-vis, $^1H$-NMR, 질량분석, ESR, 자기수자율 및 몰 전기전도도 측정에 의하여 조사하였다. 이들 착물의 기하구조가 사각평면 또는 팔면체임을 분광학적 데이터 및 자기적 측정으로부터 알았다. 이 리간드와 해당착물의 세균에(Aspergillus nigar 및 Fusarium oxysporium) 대한생물학적활성을 조사하였다. 그 결과, 금속착물들은 리간드 및 금속이온 모두에 비해 더 큰 활성을 나타내었다.

• 대한환경공학회지
• /
• 제32권5호
• /
• pp.417-426
• /
• 2010

본 연구에서는 가죽 생산 공정 중 원피 무게의 50% 이상 고형 폐기물로 발생하는 콜라겐 단백질의 섬유 기재에 미모사(Catechol Tannin) 및 채스트넛(Pyrogallol Tannin)과 같은 식물성 탄닌물질을 다양한 조건에서 고정화시킨 10 가지 다른 종류의 바이오 흡착제를 제조하였다. 제조한 각 바이오 흡착제들의 중금속 제거용 흡착제로서의 성능 평가를 위하여 Cu(II), Cd(II), Zn(II), Pb(II), Cr(III) 이온을 함유한 인공 오염수를 사용하여 다양한 반응 조건에서의 회분식 실험을 실시하였으며, 중금속들의 제거 특성을 규명하였다. 미모사를 탄닌물질로 사용하여 콜라겐에 고정화 반응을 시켰을 때 섬유 번들 내부로의 미모사의 침투력은 나프탈렌계 침투제의 주입량에 비례 하였다; 3% ${\geq}$ 1.5% > 0%. 모든 바이오 흡착제들에서 pH 3.0 이하에서는 중금속 이온들의 제거는 거의 일어나지 않았으나 pH 3.0 이상에서 중금속의 제거율이 급격히 발생하였으며 Zn(II)을 제외한 나머지 중금속이온들은 pH 6.0 이상에서는 거의 완전히 제거되었다. Cr(III)의 경우에는 바이오 흡착제 종류별 제거량이 매우 유사한 경향을 나타내었으나 Cu(II), Zn(II), Pb(II)의 제거에서는 축합형 탄닌(미모사)에 비해 이온결합이 가능한 다량의 카르복실기를 함유한 가수분해형 탄닌(채스트넛)을 사용하여 고정화시킨 바이오 흡착제에서 높은 제거능을 보였다. S10 바이오 흡착제에 대한 Pb(II) 및 Cu(II) 중금속 이온들의 흡착은 이온농도가 1,000배 변화거나 경쟁이온 화학종을 일하전 및 이하전 화학종을 사용하였을 때 영향을 받지 않았다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.380-383
• /
• 2004

Heavy metal release from wastewater is a serious environmental problem, and therefore, various wastewater treatment techniques have been developed. Among the techniques, sorption technique is most attractive. Considerable researches have been recently focused on finding out inexpensive sorbents, especially from various natural materials. In order to evaluate the applicability of the scoria taken from the Jeju Island, Korea to remove heavy metals (Pb, Cu, Zn, Cd) from aqueous solutions, equilibrium sorption experiments were conducted in this study. In equilibrium tests, powdered activated carbon (PAC), one of the most commonly used sorbents, was also tested to compare the effectiveness of the Jeju scoria with that of PAC. The Jeju scoria had larger adsorption capacity and affinity for metal ions (Pb(II), Cu(II), Zn(II), Cd(II)) than PAC. The sorption parameters of the two sorbents were evaluated by using both the Langmuir and Freundlich isotherms, and the sorption data were better fitted to the Freundlich isotherm. In addition, the sorption behavior of metal ions (Pb(II), Cu(II), Zn(II), Cd(II)) onto the scoria displayed a typical characteristic of the cation sorption. The removal of metal ions decreased at a lower pH condition due to competition with hydrogen ions for the sorption sites of Jeju scoria, while the removal increased at a high pH condition due to hydroxide precipitation.

• 한국결정학회지
• /
• 제16권2호
• /
• pp.107-127
• /
• 2005

Five Cu(II) compounds were obtained from different copper salts with btp ligands, and their structures were determined by X-ray crystallography. The structure of coordination polymer 2 contains btp-bridged tetranuclear Cu(II) units weakly connected by nitrate ions, and the structure of a discrete Cu(II) molecule 1 contains acetates and btp ligands. With perchlorate anions, two btp ligands bridge Cu(II) ions to form a double zigzag chain 3, while a single zigzag chain 4 is created with sulfate anions. The reaction of $Cu(NO_{3})_{2}$ containing $NH_{4}PF_{6}$ with btp ligands also produced a polymeric compound 5 containing $Cu(H_{2}O)_{2}^{2+}$ and $Cu(NO_{3})_{2}$ units alternatively bridged by btp ligands with H-bonds between copper bonded water and nitrate oxygen atoms. Five Zn(II) compounds were obtained from different zinc salts with btp ligands, and the structures of polymeric compounds (6, 7 and 8) and monomeric compounds (9 and 10) were determined by X-ray crystallography. With nitrate, chloride and bromide anions, btp ligands bridge Zn(II) ions to form polymeric compounds (6, 7 and 8), but btp ligands coordinate to a Zn(II) ion to form monomeric complexes (9 and 10) with $PF_{6}^{-}$ and perchlorate anions. Four silver salts and btp ligands produced two kinds of structures, dinuclear 20-membered rings and one-dimensional zigzag chain depending on different anions. For $ClO_{4}^{-}$ and OTf anions, weak interactions between Ag(I) and anions make dinuclear 20-membered rings construct polymeric compounds (11 and 13). For $PF_{6}^{-}$ anion, there are also weak interactions between Ag(I) and $F(PF_{6}^{-})(12)$, but they do not construct a polymeric compound. For $O_{2}CCF_{3}^{-}$ anion, btp ligands bridge Ag(I) atoms to make one-dimensional zigzag chain (14), and there are also interactions between Ag(I) and anions.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.73-82
• /
• 2003

Various forest humic substances were collected at different climate regions with different forest types, and adsorption of heavy metals such as Cu(II), Zn(II), Cd(II) and Cr(III) were characteristically conducted to obtain optimal adsorption conditions and to evaluate the removal efficiency of heavy metals by each forest humic substance. The adsorption isotherms for Cu(II), Zn(II), Cd(II) and Cr(III) conformed to Langmuir's equation. In the stirred reactor, the removal efficiencies of Cu(II), Zn(II) and Cd(II) by forest humic substances were more than 90% but that of Cr(III) was less than 60%. The adsorption capacities of heavy metals in the stirred reactor were considerably varied depending on the type of forest humic substances. Among humic substances, the one from deciduous forest at subtropical region showed the highest removal efficiency for Cu(II). There was no significant difference in removal efficiency by each heavy metal depending on reaction temperature ranged from 20 to 50oC except for Cr(III), and the adsorptions of Cu(II), Zn(II) and Cd(II) were occurred rapidly in the incipient stage within 10 min, while Cr(III) needed more reaction time to be adsorbed. The stirred and packed bed column reactors showed similar adsorption characteristics of heavy metals by humic substances, but the removal efficiency was considerably higher in the packed bed column reactor than in the stirred reactor. Therefore, in actual operation process, a continuous packed bed column reactor was more economical.

• Nutritional Sciences
• /
• 제9권1호
• /
• pp.20-28
• /
• 2006

Aryl sulfotransferase (AST) IV is a liver enzyme involved in detoxication and has been shown to be susceptible to down regulation by a number of hepatotoxic xenobiotics. Studies presented here to investigate the ability of biological and non-biological divalent metal cations on AST IV activity showed that AST IV was strongly inhibited following in vitro or in vivo exposure to. Zn ( II ), Co ( II ) or Cd ( II ). It was found that $0.025\sim$2.5 uM of these metal ions were sufficient to cause $50\%$ of inhibition in vitro in purified AST IV and $0.25\sim$25 uM of these metal ions in liver cytosolic fractions. For the in vivo study, 1,000 mg Cu ( II )/kg, 2,000 mg Zn ( II )/kg or 250 mg Cd( II )/kg was added to individual diets and administered to three (3) group; of mts over a 7 week period The Co ( II )-supplemented diet produced no apparent change in rat growth rate and resulted in 30-fold increase in liver cytotolic Cu ( II ) levels, suggesting that elevated levels of Cu ( II ) ion in the liver were responsible for the loss of AST IV activity. In contrast, the Zn ( II )-supplemented diet caused a decrease in rat growth rates and resulted in zero increase in liver Zn ( II ) levels, which suggested an indirect inhibition mechanism was caused by Zn ( II ) in the liver. Rats were fed the Cd-supplemented diet also displayed a decrease in growth rate with little or no change in liver Cu ( II ) or Zn ( II ) levels. When the liver cytosols of mts from the metal ion diets were immunochemically analyzed for the AST IV and albumin contents, no significant changes were observed in albumin levels. However, AST IV contents in the cytosols of mts fed the Zn ( II )-supplemented diets showed a slight decrease in amount These results showed that AST IV activity in vitro and in vivo can be inhibited by Co ( II ), Zn ( II ), and Cd ( II ) by apparently different mechanisms. The immediate response to a Zn injection showed a decrease in AST IV activity but not in the AST IV content in liver cytosol. These mechanisms appeared to involve direct actions of the metal ion on AST IV activity and indirect actions affecting AST IV amount.