• 한국결정성장학회지
• /
• 제12권5호
• /
• pp.247-252
• /
• 2002

$(Pb_{1-x}La_x)TiO_3$ (x = 0.1) 박막을 초음파분무 MOCVD법으로 ITO-coated glass 기판 위에 제조하였다. PLT 박막 제조 시 후열처리 및 seeding layer가 결정화 및 미세구조, 전기적 특성에 대한 영향을 알아보았다. 후열처리에 의하여 박막의 결정성은 향상되었고 미세구조에도 영향을 주었으며, 전기적 특성은 이들 특성의 변화에 의해서 향상되었다. 그리고 seeding layer에 의한 핵 생성자리 제공에 의하여 결정성의 향상과 grain 크기의 증가에 의하여 박막의 전기적 특성 또한 향상되었다. Seeding layer를 가지고 60분 동안 후열처리를 한 박막이 가장 우수한 전기적 특성을 나타내었으며 이 박막의 1 kHz에서 유전 상수는 213을 나타내었다.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.619-625
• /
• 1997

$Si_3N_4$에 2 wt% $Al_2O_3$와 6 wt% $Y_2O_3$을 첨가한 분말을 가스압소결 방법으로 시편을 제조하였다. 이때 소결시 조건(온도, 압력, 시간) 변화에 대한 기계적 특성 변화를 비교하였다. 이때 나타난 결과에 의하면 $1900^{\circ}C$, 3 MPa에서 1시간 동안 유지시켰을 때 최적의 조건을 갖는다는 것을 보여주었다. 이는 온도를 높여 주거나 유지 시간을 길게 하였을 때 입자 조대화에 의해 기계적 특성이 떨어지는 것을 볼 수 있었다. 그러나 압력을 증가시킬 때에는 미세한 조직을 가지므로 기계적 특성은 좋아짐을 나타내지만 파괴 인성이 떨어지는 것을 볼 수 있었다. 이로 인해 소결시 최적의 조건을 찾는 것이 중요함을 알 수 있었다.

• 한국결정성장학회지
• /
• 제11권3호
• /
• pp.111-114
• /
• 2001

초음파분무를 이용한 MOCVD법으로 전도성 산화물 (Ba,Sr)RuO$_3$ 박막을 Si(100) wafer위에 제조하였다. XRD 측정 결과 BSR박막은 (110) 배향성을 가지고 성장하였으며 500$^{\circ}C$ 이상의 증착온도에서 결정성장이 양호하였다. Ba과 Sr의 조성비의 차이에 따라 AFM 측정결과 Ba에 대한 Sr의 비가 증가함에 따라 grain크기가 증가하였다. 또한 비저항의 측정을 통해 Ba에 대해 Sr의 비의 증가에 따라 BSR 박막의 비저항이 415에서 261$\mu$$\Omega$${\cdot}$cm로 감소하였다.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.665-672
• /
• 1997

Molybdenum silicides $MoSi_2$ 및 $Mo_5Si_3$를 제조하기 위하여 순금속 Mo과 Si의 혼합분말을 볼밀법으로 실온에서 기계적 합금화시켰다. $MO_{33}Si_{67}$조성의 혼합분말을 100시간 볼밀처리한 결과 금속간화합물 $MoSi_2$가 생성되었으며 $725^{\circ}C$까지 후열처리시킴으로써 단상의 $MoSi_2$로 상변태함을 알 수 있었다. 얻어진 분말의 결정립 크기는 19 nm로 시판 $MoSi_2$분말보다 약 1/4로 매우 미세하였다. 또한 $Mo_{62}Si_{38}$ 조성의 혼합분말도 300시간 볼밀처리를 함으로써 금속간화합물 $Mo_5Si_3$가 생성되었는데 $1000^{\circ}C$까지의 후열처리로 단상 $Mo_5/Si_3$의 미세 결정립 분말을 얻었다. 이와같이 볼밀처리에 의한 기계적 합금화시 $Mo_5Si_3$상이 형성되기 어려운 것은 금속간화합물 $Mo_5Si_3$이 가지고 있는 복잡한 결정구조와 매우 큰 단위격자에 기인하는 것으로 판단하였다. 볼밀법에 의해 제조한 초미세 결정립 분말재료는 기계적 성질을 향상시켜 초고온 구조재료에 응용이 기대된다.

• 한국광물학회지
• /
• 제4권2호
• /
• pp.129-140
• /
• 1991

Two illite polytypes, 2M1 and 1Md, have been identified from the sericite deposits of the Bobae mine, Kimhae, Kyungsangnam-do. Each polytype has characteristic grain size, chemical composition, and occurrence. 2M1 illite occurs predominantly in the sericitic alteration zone, while 1Md illite occurs predominantly in the propylitic alteration zone, implying that the former was formed in the higher temperature than the latter. Illites can be subdivided into two types based on their crystal sizes;(1) the $\mu\textrm{m}$-sized illite which is below 0.01mm(100$\mu\textrm{m}$) in size and consists of 2M1 and 1Md type, (2) the mm-sized illite which is above 0.01mm in size and consists only of 2M1 type. Especially illite below 1$\mu\textrm{m}$ is premominantly of 1Md type. Therefore, it seems likely that illite crystal size is to some extent related to the polytype. XRD data show that there is no interstratified layer in illites regardless of the crystal size and polytype. Activity of muscovite component of the $\mu\textrm{m}$-sized illite is 0.843 while that of the mm-sized illite is 0.790. However, the latter is more similar to muscovite in crystal structure than the former is. The mm-sized illite has less Al and more Kthan the $\mu\textrm{m}$-sized illite. In both illites, Si contents show a positive relation to octahedral Mg. Fluid inclusion study and mineral association show that the formation temperature of illite is $270-330^{\circ}C$. The major chemical processes leading to the formation of sericitic deposit as well as the alteration zones are the leaching of SiO2 from the country rock and the addition of Al2O3 and K2O into the sericitic ores.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.807-810
• /
• 2001

Fatigue crack growth tests were carried out using high manganese cast steel under constant amplitude loading. Crystal grain size of the material is about 1000$\mu\textrm{m}$. For this material, the fatigue crack growth mechanism of high manganese steel was clarified from results such as observation of crack growth path and fracture surface. $\Delta$$K_{th}$ is about 8MPa$\surd$m which is quiet large as compared to the general structural steels and the crack growth rate is lower than the general structural steels especilly in the low $\Delta$K regsion. The reason of this behavior is crack closure due to fracture surface roughness.

• 한국표면공학회지
• /
• 제25권5호
• /
• pp.223-233
• /
• 1992

(Ti, Al)N films were deposited on 304 stainless steel by D.C. magnetron sputtering using Al target and Ti plate. The properties of (Ti, Al)N films such as composition, microhardness, grain size, crystal structure were investigated. The chemical composition of (Ti, Al)N films was similar to the sputter area ratio of titanium to aluminum target by means of EDS and AES survey. The higher bias voltage to substrate and the smaller input of N2 gas showedthe increased microhardness and the finer grain size of the films. The results obtained from this study show, it is belived, that the (Ti, Al)N film by D.C.magne-tron sputtering is promising in the wear resistance use.

• Coupled systems mechanics
• /
• 제5권4호
• /
• pp.341-353
• /
• 2016

Manufactures of multi-crystalline silicon ingots by means of the directional solidification system (DSS) is important to the solar photovoltaic (PV) cell industry. The quality of the ingots, including the grain size and morphology, is highly related to the shape of the crystal-melt interface during the crystal growth process. We performed numerical simulations to analyze the thermo-fluid field and the shape of the crystal-melt interface both for steady conditions and transient processes. The steady simulations are first validated and then applied to improve the hot zone design in the furnace. The numerical results reveal that, an additional guiding plate weakens the strength of vortex and improves the desired profile of the crystal-melt interface. Based on the steady solutions at an early stage, detailed transient processes of crystal growth can be simulated. Accuracy of the results is supported by comparing the evolutions of crystal heights with the experimental measurements. The excellent agreements demonstrate the applicability of the present numerical methods in simulating a practical and complex system of directional solidification system.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.251-256
• /
• 1996

Effect of mixed grinding with a planetary ball mill of starting materials before heat treatment on the crystal structure and superconduction properties in the YBaCu composite oxide was studied. The size reduction of powders too place in the early stage of grinding, followed by aggregation of the resultant fine particles. The uniformity of the composition in the mixture was improved with grinding, which later decreased in the crystal grain size and well distribution of twin phase in the sintered bodies. The critical current density of the sintered bodies obtained from the mixture ground for 60 minutes showed the maximum value about 150 A/$\textrm{cm}^2$, while critical temperatures were around 90K and were independent of the grinding time.