• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.14-22
• /
• 2009

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.523-531
• /
• 2014

Brushless Dual-Mechanical-Port Electrical Machine (BLDMPEM) is a new type of motor designed for Hybrid Electric Vehicle (HEV), which contains two mechanical ports and two electric ports. Compared with Dual-Mechanical-Port Electrical Machine (DMPEM), the brushless structure brings higher reliability and easier maintenance. In this paper, the model of BLDMPEM is discussed. In Chapter 2, the energy flow and mathematical model of BLDMPEM are analyzed. Then a novel three-phase half-bridge controlled rectifier topology and its control strategy for cruising mode of HEV based on BLDMPEM are proposed in Chapter 3. Compared with the Field Oriented Control (FOC) strategy of BLDMPEM, the proposed method does not require accurate motor parameters, and it is much simpler and easier to be implemented. At last, simulation and experiment results show the feasibility and validity of the proposed strategy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.672-675
• /
• 1996

This paper presents algorithm including Kalman filter for transfer alignment of velocity and quaternion matching method, when master inertial navigation system is a gimbled type and slave inertial navigation system is a strapdown type on a cruising ship which is naturally in motion of horizontal axis attitude. And relative attitudes are considered on a measurement equation for quaternion matching between master INS and slave INS.

• The Journal of Korean Physical Therapy
• /
• 제8권1호
• /
• pp.1-14
• /
• 1996

The present case study has a object to investigate the changes in locomotion patterns of infant with athetoid cerebral palsy would be occured by the program when it is applied with upper extremity weight bearing. The subject has been limited to one infant over one year of age, selected from the patients in the physical therapy clinic, Rehabilitation Center, Taegu University. Subject is normal in the visual and auditory sense, but he is unable to walk on his own Subject weighted 2.9kg at birth and underwent severe postnatal kernicterus, always on the baby-walker at homo. He disliked supine position characteristic in moving in athetoid type before he was under the program. The program was applied 7 months. Each session of the program is composed of 7 stages : (1) prebriefing between the therapist and the parents (2) pretherapy amusement time of the infant (3) warming-up (4) upper extremity weight bearing (5) cooling-down (6) post-therapy amusement time (7) postbriefing. The locomotion of the subject is proved to be influenced by the program. He showed a leftward circular movement as a result of the exercise, reducing the involuntary movement of his head when he was positioned for crawling. Later he proceeded to develop into creeping, crawling, kneeling and finally cruising. In conclusion, it appeared evident that the locomotive abilities of the subject is improved by the program explored in this study. The higher locomotive patterns could be achieved such as crawling, sitting, kneeling and cruising wich enable the upper extremities weight bearing.

• 한국실내디자인학회논문집
• /
• 제14권2호
• /
• pp.128-134
• /
• 2005

This dissertation is about a study on the space planning of take-out coffee shops grouped by type. The classification is based primarily on stand-alone shop, which runs independently, and shop in shop, located inside of another shop with different industry. And its subdivision is characterize by 3 types: Combination type has not only space to enjoy coffee as we can usually see in conventional coffee shops, but also a counter where take-out coffee is served. Separation type has space for drinking coffee and an external booth for easy buy. Booth type is a booth itself or driving (cruising) booth. In conclusion, some take-out coffee shop are exampled and space analysis is made with analytic tools, such as people of preference, location evaluation, functional space division, dimension per person, and planning of traffic line.

• 대한조선학회논문집
• /
• 제34권4호
• /
• pp.21-30
• /
• 1997

본 논문은 복합지지형 초고속선에 사용될 pod형 물분사 추진장치에 대한 예인수조 실험 및 성능해석 결과를 보여준다. 선체와 물분사 흡입구간의 상호작용이 매우 작은 것으로 가정하고 선체저항 및 추진성능 실험을 토대로 시험선 운항시 성능을 해석하였다. 축류식 펌프를 갖는 pod형물분사 추진장치를 설계하고 단독특성시험 시스템을 개발하여 실험을 수행하였다. 실험결과로부터 펌프 성능, 제트효율, 흡입구 및 노즐의 손실계수 등 물분사 추진장치 설계 및 특성파악에 유용한 자료를 확보하였다. 실험결과는 설계요구조건과 비교적 좋은 일치를 보여준다.

• 한국소음진동공학회논문집
• /
• 제16권10호
• /
• pp.1067-1073
• /
• 2006

In this paper, we present noise measurement results of 8 vehicles. The measurement was done by a close proximity method attaching surface microphones on the test vehicle. For the 9 road surface types constructed at Korean highway test road, the vehicles were tested from 50 to 120 km/h at the interval of 10 km/h in normal steady state and inertia cruising conditions. Using the results, we evaluate and discuss the effect of vehicle noise generation depending on the different conditions for vehicle type, speed, road surface and loading condition, especially focused on friction noise between tyre and road surface.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.428-433
• /
• 2006

In this paper, we present noise measurement results of 8 vehicles. The measurement was done by a close proximity method attaching surface microphones on the test vehicle. For the 9 road surface types constructed at Korean highway test road, the vehicles were tested from 50 to 120 km/h at the interval of 10 km/h in normal steady state and inertia cruising conditions. Using the results, we evaluate and discuss the effect of vehicle noise generation depending on the different conditions for vehicle type, speed, road surface and loading condition, especially focused on friction noise between tyre and road surface.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.34-42
• /
• 2017

In rough seas, green water shipped on board may impose quite large impact loads on the structures on deck and sometimes result in structure damages. One of the essential tasks of the naval fluid engineers is to provide the design impact loads which are needed for proper design of the structure strength against the green water impacts. Computation of the design impact load due to green water needs first a process to find the sea condition and the ship cruising condition which cause maximum green water impacts on structures as well as other succeeding processes to compute ship motion responses, green water flows and impact loads. Also, as a bold and practical process, it is needed that the irregular real seas are to be substituted by design regular waves which are equivalent in view points of green water impacts. In this paper, the whole processes to compute the design green water loads acting on bow structure are set up creatively. And the green water design impact loads acting on the box-type structure of a high-speed ship's bow are computed and discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.252-255
• /
• 2008

In this study, the characteristics of crossing a river of Ground Armored Vehicle (GAV) were evaluated by numerical method and real size tests. 3-D hybrid mesh systems were constructed by 3-D models of the GAV, and a commercial software, FLUENT, was used in numerical analysis. In order to deal with multi-phase problem (air and water), Volume Of Fluid (VOF) method was used, and Moving and Deforming Mesh (MDM) was adapted for unsteady motion of GAV. There were two steps in this research. Firstly, stability of the GAV which cruised a river was evaluated by changing several shapes of water-proof-front-wing of the GAV in steady state, and compared results (free surface shape and drag value in 10km/h) with those of real size tests. Secondly, results of unsteady analysis considering weight and moment of inertia of the GAV were presented. There were showed a maximum velocity with a designed water jet and dynamic stability including pitch, roll, and yaw moment. Based on these results, the optimal shape of water-proof-front-wing of the GAV was determined for a proto-type of the GAV.