• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.47-61
• /
• 2004

Although the purpose of orthodontic treatment is to increase the function and esthetics of the jaws along with increasing stability, there are many side effects during the treatment itself, such as root resorption and alveolar bone resorption. Such resorption of the apical root Is unpredictable, and may even proceed into the dentin layer. Once the process has begun, it is irreversible. By evaluating the effect of many oral habits, especially that of nail biting, in correlation with the root and the periodontal tissues, the appropriate biomechanics for orthodontic treatment can be taken into consideration, along with the possibility of root resorption and alveolar bone loss during orthodontic treatment, and any legal problems that might occur. Among the male and female patients of the ages $10\~15$ without skeletal deformity, 63 were chosen as the experiment group with known nail biting habits at time of examination, and within the same age group without nail biting habits as the control. After the orthodontic treatment, number of the experiment group was 31 and the control group was 22. The periapical radiographies of anterior teeth were taken and the assesment of the root length and alveolar bone level were taken before(T1) and after(T2) the orthodontic treatment. The results from this study were as follows : 1. Before the orthodontic treatment, average crown-to-root ratio of the experimental group showed noticeably high values in 4 maxillary incisors and mandibular right central incisor. 2. Before the orthodontic treatment, comparing the root length, maxillary and mandibular right central incisors and both mandibular incisors had a smaller value in the experimental group. 3. Before the orthodontic treatment, comparing and evaluating the alveolar bone loss measured from the cemento-enamel junction to the alveolar bone crest, some crestal bone of the experiment group showed greater loss than the control. 4. After the orthodontic treatment, there was shortening of the root length and loss of the crestal bone in both groups. 5. After the orthodontic treatment, the changes of C/R ratio and the shortening of root length were significantly high in the experimental group. 6. After the orthodontic treatment, the level of alveolar crestal bone showed greater loss in the experimental group.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.185-190
• /
• 2018

This study was conducted to investigate the optimum electrical conductivity (EC) levels of nutrient solution for growth of mother plants and increasing occurrence of daughter plants of strawberry ($Fragaria{\times}ananassa$ Duch. cv. Maehyang) using hydroponics. The mother plants of strawberry were transplanted in cultivation pot ($61{\times}27{\times}18cm$) filled with coir medium on March 22, 2017. Nutrient solution was supplied by the drip tape at $0.6dS{\cdot}m^{-1}$ of EC levels for rooting during 11 days. After rooting, the mother plants of strawberry was treated at the EC levels of 0.6, 1.2 or $1.8dS{\cdot}m^{-1}$, respectively. Growth characteristics, such as mother plants and daughter plants of strawberry were measured at 100 days after transplanting. The plant height of mother plant was significantly higher at $0.6dS{\cdot}m^{-1}$ treatment, and the crown diameter of mother plant was significantly greater at $1.8dS{\cdot}m^{-1}$ treatment. The fresh and dry weights of shoot were higher at both 0.6 and, $1.2dS{\cdot}m^{-1}$ treatments. The number of runners was not significantly different in all treatments. The fresh and dry weights of runner were heavier at $0.6dS{\cdot}m^{-1}$ than other treatments. The number of daughter plants was the highest, 16.7 at the $1.2dS{\cdot}m^{-1}$ treatment. However, the fresh and dry weights of third daughter plant were the heaviest at $0.6dS{\cdot}m^{-1}$ treatment. Although the daughter plants were a large of production at $1.2dS{\cdot}m^{-1}$ treatment, the low EC levels of strawberry were positive in terms of seedling quality during nursery. These results indicated that growth of mother plant and occurrence of daughter plants were greater at the EC $0.6dS{\cdot}m^{-1}$ nutrient solution for hydroponic cultivation of 'Maehyang' strawberry during nursery period.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1535-1545
• /
• 2005

The study aimed firstly, to develop the women's bodysuit sleeve block construction method adopting the appropriate pattern reduction rates according to the fabric stretch property. Secondly, the details applied to the bodysuit sleeve block drafting (Dr the educational and industrial usage were proposed. For these, several distinguishing bodysuit sleeve pattern making methods(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 and Mixed Joseph-Armstrong: T4) were analyzed and divided into two categories that adopt 1) the equally (i.e., T1) and 2) the differently(i.e., T2, T3 & T4) distributed front and back armhole length measurements. Women's sleeve samples were made for the research using the same stretch fabric($50\%\;and\; 70\%$ in wale and course each) to the previous research. A group comprising 5 relevant experts evaluated the fit and comfort features of the samples. Experiments analyzed the appearance of sleeve samples focused on total 13 evaluation parts(including the front/side/back fit tolerance, sleeve centre line, sleeve length, appropriateness of the sleeve appearance balanced with the bodysuit and etc.): and performed the comfort test evaluating three kinds(vertical-front/vertical-side/ horizontal) of arm movements. The most appropriate bodysuit sleeve to fulfil the original aims of the study was suggested. The findings and suggestions throughout the study were: 1) the measurements and required reduction rates for the bodysuit sleeve block developed: outer sleeve length (with 1.0 RR), crown height(with 0.7 RR), front and back armhole lengths measured on the bodysuit blocks ($0\%$ ease amount), elbow width(0.9/0.95 RR), wrist girth measurements(from $12\%\;to\;18\%$ tolerances can be given to): and 2) the differently distributed front and back armhole length measurements resulted in the better fit and comfort through the research.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.259-270
• /
• 1998

This study, as an essential research to develope a mountainous runoff model, was conducted to clarify the hydrologic character and water budget equation of Pinus densiflora and Quercus acutissima. Net rainfall quantity division for two species was investigated at Youngsung experiment forest and Yeungnam University for 30 months(Sep. 1995-Jun. 1998). The results were summarized as follows; 1. The percentages of throughfall and stemflow to gross precipitation are 73.8% and 0.8% in the Pinus densiflora, and 76.9% and 3.8% in the Quercus acutissima, respectively 2. In the Pinus densiflora, regression fomula of stemflow, throughfall, and net rainfall to gross precipitation are S$_{f}$ = 0.01GP-2.05 ($r^2$=0.54) T$_{f}$ = 0.79Gp - 26.04 ($r^2$=0.92), N$_{r}$ = 0.81Gp - 28.09 ($r^2$=0.92). Stemflow and throughfall increased in direct proportion to gross precipitation. 3. In the Quercus acutissima, regression fomula of stemflow, throughfall, and net rainfall to gross precipitation are S$_{f}$ = 0.03Gp + 12.25 ($r^2$=0.74), T$_{f}$ = 0.78Gp + 19.75 ($r^2$=0.96), N$_{r}$ = 0.81Gp + 3199 ($r^2$=0.96), respectively. Comparing with two species, gross precipitation has a much larger effect on the stemflow and throughfall of Quercus acutissima than those of Pinus densiflora. 4. In the analysis of intercorrelation between stemflow and throughfall of each species and crown area(CA), diameter at breast height(DBH), and gross precipitation(Gp), correlation coefficient was higher by following order at each species; Gp>CA>DBH on stemflow of Pinus densinora, Gp>DBH>CA on stemflow of Quercus acutissima, and Gp>CA>DBH on throughfall of Pinus densiflora and Quercus acutissima.ssima.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.165-175
• /
• 2018

The purpose of this study is to provide the basic data such as distribution status, growth characteristics, and the structural characteristics of forest stands for the systematic conservation and management of relict forest trees (stem girth of 300cm or larger) established naturally in Gangwon Province, Korea. The survey showed that 434 individuals of 19 species (conifers: 228 individuals of 4 species, broad-leaved trees: 206 individuals of 15 species) were distributed in Gangwon Province, and Taxus cuspidata was the most abundant among them with 203 individuals or about 46.7 % of the total. The stem girth was average of 404cm (conifers: 373cm, broad-leaves: 421cm), and Tilia amurensis with multi-stemmed growing on Sorak mountain range had the largest stem girth at 1,113cm. The average height and the crown width of relict forest trees were 15.4m and 10.0m, respectively. Although the environments of relict forest trees showed a slight difference by species, the relative appearance frequencies of most trees were high in the environments where the altitude was higher than 1,000 m, slope degree was greater than $25^{\circ}$, the slope faced north, and microtopography was at the upper of slopes. Regarding the stand characteristics of relict forest trees per unit area ($/100m^2$), the average total coverage was 294% (max. 475%), the total average number of species was 36 species (max. 60 species), the average species diversity index (H') was 2.560 (max. 3.593), the average canopy closure was 84.8% (max. 94.6%), and the average basal area (/ha) was $52.7m^2$ (max. $116.4m^2$, relict trees $30.0m^2$, and other trees $22.7m^2$). The analysis of the dynamics of the forest stands where relict forest trees were growing showed four types of the maintenance mechanisms of relict forest trees depending on the supply pattern of succeeding trees: "Low-density but persistent type (Quercus mongolica, Abies holophylla, Tilia amurensis, and Pyrus ussuriensis)," "Long ago stopped type (Pinus densiflora)," "Recently stopped type (Abies nephrolepis, Quercus variabilis, and Betula schmidtii)," and "Periodically repeated types of supply and stop (Salix caprea and Quercus serrata).".

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.113-123
• /
• 2001

The main purpose of this study was to provide information on attenuation effects in forest tree belt of pine stand and oak stand. The relationships between DBH, tree height, clear length, crown area and number of trees and also between distance from noise origin, landslope etc. were analysed by correlation and multiple regression. The results obtained were as follows : 1. There was no difference between pine stand and oak stand in effecting noise attenuation. 2. The noise pressure was highly correlated with all of seven elements tested and both DBH and distance from noise origin have higher r-values than the others. For the pine stand, it was 0.9133 in DBH and 0.9630 in the distance and for the oak stand, 0.9296 in DBH and 0.9565 in the distance. 3. The optimum regression equation for pine stand and oak stand were made by combination of two variables (DBH and distance). The table of noise attenuation was made by optimum regression equation. In the case of pine stand, the attenuation ratio was 29% at 5m, 31.6~32.6% at 10m, 38.3~39.8% at 20m and 45.2~46.6% at 30m. And case of oak stand, the attenuation ratio was 29% at 5m, 31.6~34.2% at 10m, 38.6~41.4% at 20m and 45~47.2% at 30m. 4. As the noise pressure limit at the Urban housing area according to environmental laws is under 55dB, it is suggested by the table of noise attenuation that the distance, and DBH for the pine and oak stand are over 20m, 400cm and 30-35 trees, respectively.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.429-437
• /
• 2019

This study was conducted to examine the effect of humidification and shading during cutting propagation on growth and development of strawberry (Fragaria x ananassa Duch.) 'Maehyang' plants at a propagation stage. The runner cuttings were stuck on Nov. 23, 2017 in propagation benches set in a Venlo-type glasshouse. Four shading treatments, no shading (control, C), 55% shading with white lawn (W55), 55% black shading net (B55), or 100% black plastic film (B100) with either an intermittent fog system (H) or without fog system. The shading and fog systems were removed 2 weeks after sticking of strawberry cuttings. A nutrient solution for strawberry, which was developed by Yamazaki, was supplied once a day with electrical conductivity (EC) $1.6dS{\cdot}m^{-1}$ and pH 5.8. Growth parameters such as plant height, longest root, crown diameter, leaf chlorophyll, leaf area and fresh and dry weight were measured at 7 days and 26 days after sticking. There was no significant difference in growth of above-aerial part of strawberry. The overall growth of the strawberry roots was better grew by providing fog than that not provide fog. The root fresh weight and root dry weight after 26 days after sticking of strawberry cutting was the best in the treatment that provided fog system without shading (CH). The longest root after 26 days after sticking of strawberry cutting was the best in the treatments that provided fog system with either 55% white lawn (W55H) and 55% black shading net (B55H). These results suggest that morphogenesis of these plants were affected by humidification and shading types. In a broader perspective, these results can be used to optimize studies of other crops grown from cuttings.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.4-21
• /
• 2018

This paper reviewed the legitimacy of the name of those sixteen pieces of hat artifacts known in Korean as pyeongjeongmo and currently housed by the National Palace Museum. This was undertaken in order to rectify the error of calling them pyeongjeongmo. Also, the paper suggested pyeongjeongmo's production method to apply representation of the artifacts or production of Joseon officials' hats as representation of ritual costumes in the royal court. The name pyeongjeongmo originated from pyeongjeonggeon. Gyeongguk Daejeon recorded that noksas wore yugak-pyeongjeonggeon and seoris wore mugak-pyeongjeonggeon, but the pyeongjeongmo artifacts housed in the National Palace Museum have been found irrelevant to those pyeongjeonggeons put on by both noksas and seoris. Rather, they has been confirmed as corresponding to dugeon or jogeon worn by byeolgams or suboks who served at the palace of the crown prince or princess. Through the investigation of the artifacts, the researchers could find out the tailoring and sewing methods, the finished look, and the folding manner of pyeongjeonggeon. Although the structure of pyeongjeonggeon was generally consistent, the frontal look was slightly different depending on the folding manner, resulting in three distinguished types of pyeongjeonggeon. Regardless, the pyeongjeongmo was made with one piece of fabric by a flat tailoring and folding method to create a three-dimensional hat. The finished shape appeared low in the front and high in the back side structure. The head girth was 55~59 cm, and the height was 19.4~21.5 cm. To make it with one piece of fabric, the head girth part was tailored in the same direction as the strands. Based on the artifact Changdeok 23820, this paper has also suggested a finished reproduction through the processes of preparing the materials, mounting, making the center ornaments, sewing and folding. The tailoring was completed with black silk fabric which was cut in a unique shape designed in advance, and hemp fabric which was mounted to the former. The top part of the head was finished with black threads, and the center line at the back was fixed with decolored cotton threads by blanket stitches with 3.5~4 cm intervals. Bamboo strands were inserted in the inside of the front-folded part, which then was fixed by patterned stitches with white cotton thread. At the back, a small bamboo clasp was attached so that one can lock it to the headband and prevent it from falling off.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.432-440
• /
• 2011

The objective of this study was to investigate growth and fruiting characteristics (e.g., nut qualities) of chestnut (Castanea cerenata) after applying various fertilizer treatments at the cultivation site in Suncheon. Fertilizer treatments were designed as follow: liquid fertilizer, chemical fertilizer, organic fertilizer, and control. Both liquid and chemical fertilizer treatments provided the best growth in height and basal diameter. In addition, these two treatments were very effective for crown width of the trees between both east-west and north-south orientation. The liquid fertilizer treatment was effective on total length of the fruiting branch and length of the bearing to terminate part. Both liquid and chemical fertilizer treatments produced the longest length of basal to bearing part compared to the other two treatments. The liquid fertilizer treatment showed the most thickened basal diameter of the fruiting branch and the greatest diameter of above and below the bearing burr part. Elongation Index of the fruiting branch (EI) was the highest with liquid fertilizer treatment and the remaining four indices (Production Index of fruiting branch, PI; Ratio of Diameter between below and above bearing burr part, RD; Growth Index of fruiting branch diameter, GI; Thickness Index of fruiting branch or dormant branch, TI) were the highest with the chemical fertilizer treatment. Total number of produced branch per fruiting mother branch and number of small and weak branches per fruiting mother branch were highest on the control and liquid fertilizer treatment; however, all treatments produced similar numbers. The chemical and organic fertilizer treatments produced a high number of fruiting branches per fruiting mother branch, while organic and liquid fertilizer treatments produced a high number of burr per fruiting branch. The rate of commercializing on the basis of nut weight and quantity was higher on control (87.5%) than chemical fertilizer treatment (84.6%); however, the rate was even lower on liquid fertilizer treatment (84.3%) and organic fertilizer treatment (82.7%). The liquid fertilizer treatment showed the highest average of nut weight, while chemical fertilizer treatment showed the highest average number of fruiting burr. There was no significant difference in average number of normal nuts per burr among treatments. The yield per tree was high on chemical (8.2 kg) and liquid (8.0 kg) fertilizer treatments, but there was no significant difference among treatments. In the rate of nut grade on the basis of nut weight and quantity, the liquid fertilizer treatment, 43.5% and 34.3% more than large nut respectively, produced higher value chestnuts compared to other treatments.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.12-21
• /
• 2024

The aim of this research was to investigate the effect of gibberellin on improving seedling growth characteristics and enhancing strawberry quality in cutting propagation. Cuttings of the cultivar 'Seolhyang' were treated with GA₃ for 30 and 60 minutes at concentrations of 50, 100, and 150 mg·L^-1, with distilled water used for dipping as the control. Evaluation of seedling growth showed a positive correlation between the duration of gibberellin dipping and growth characteristics such as leaf number and SPAD value. Plant height, petiole length, leaf length and width, and leaf area varied significantly based on the interaction between dipping time and concentration. Crown diameter exhibited differences depending on the dipping time, with cuttings producing superior seedlings having a diameter of 8.0 mm or more for all treatments except the 30-minute, 100 mg·L^-1 treatment. The T/R ratio was significantly lower in the 30-minute, 50 mg·L^-1 treatment, indicating the highest plant vigor. Quantum yield was lower at a concentration of 150 mg·L^-1, showing a decreasing trend with increasing gibberellin concentration. Nonphotochemical quenching was significantly smaller in the 30-minute, 150 mg·L^-1 treatment, indicating an effective reduction of stress in the cuttings. Antioxidant content was highest in the 30-minute, 50 mg·L^-1 treatment and the 60-minute, 150 mg·L^-1 treatment. Moreover, the results of post-transplanting growth assessment showed no negative effect of gibberellin on flowering induction. Therefore, it was confirmed that gibberellin treatment during the cutting propagation of 'Seolhyang' strawberries had a positive effect on the production of high-quality seedlings. Dipping the cuttings in 50 mg·L^-1 gibberellin for 30 minutes is considered to be the most suitable method for improving growth and quality compared to the control.