• Journal of Ocean Engineering and Technology
• /
• v.26 no.5
• /
• pp.1-4
• /
• 2012

A energy saving device "Crown duct" has been developed and its efficiency gain has been verified experimentally in the towing tank of SSPA. The preswirl stator is well known as one of energy saving devices, which recovering the rotational energy of propeller slipstream. Crown duct has two functions of recovers the rotational energy by three blades on top of duct and of flow concentration by semi-duct. The model tests showed 4.4% efficiency gain with Crown Duct at full load condition and 6.9% at ballast condition compared with the bare hull ones for the middle class tanker.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.1-5
• /
• 2014

Chosun University, in cooperation with SPP shipyard, has developed an energy saving device based on a new concept: "Crown Duct." Crown Duct is composed of a semi-duct with short struts inside and outside the duct. Theoretical calculations for two different designs were carried out using the CFD code "Ship Flow." The design selected from these two different forms by the CFD code analysis was tested in a towing tank at SSPA. The results showed about 4% efficiency gain under a full-load condition and about 7% gain under a ballast condition in the towing tank test.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2001

The Dentigerous cyst is reported to be one of the most common lesions of the jaw. It is derived from reduced enamel epithelium that surrounds the crown of an unerupted tooth. Dentigerous cysts usually remains asymptomatic and presents as well-circumscribed radiolucencies surrounding the crown of a tooth. Most dentigerous cysts are treated by surgical enucleation or marsupialization of the cyst to allow eruption of the permanent tooth. The nasopalatine duct cysts derived from the islands of epithelium remaining after closure of the embryonic nasopalatine duct. The cyst presents as a well-circumscribed oval or heart-shaped radiolucency located in the midline of the anterior maxilla between the roots of the central incisors. Treatment is by surgical enucleation, employing a palatal approach. This report present two cases. One case was diagnosed with dentigerous cyst and treated by enucleation. 12 Months later, affected second premolar was erupted normally. The other case was diagnosed with nasopalation duct cyst. Histological examination of the enucleated cyst confirmed a nasopalatine duct cyst. There was no recurrence during follow up period.

• Imaging Science in Dentistry
• /
• v.40 no.2
• /
• pp.69-74
• /
• 2010

Purpose : The research was performed to predict the three dimensional relationship between the impacted mesiodens and the maxillary central incisors and the proximity with the anatomic structures by comparing their panoramic images with the CT images. Materials and Methods : Among the patients visiting Seoul National University Dental Hospital from April 2003 to July 2007, those with mesiodens were selected (154 mesiodens of 120 patients). The numbers, shapes, orientation and positional relationship of mesiodens with maxillary central incisors were investigated in the panoramic images. The proximity with the anatomical structures and complications were investigated in the CT images as well. Results : The sex ratio (M : F) was 2.28 : 1 and the mean number of mesiodens per one patient was 1.28. Conical shape was 84.4% and inverted orientation was 51.9%. There were more cases of anatomical structures encroachment, especially on the nasal floor and nasopalatine duct, when the mesiodens was not superimposed with the central incisor. There were, however, many cases of the nasopalatine duct encroachment when the mesiodens was superimpoised with the apical 1/3 of central incisor (52.6%). Delayed eruption (55.6%), crown rotation (66.7%) and crown resorption (100%) were observed when the mesiodens was superimposed with the crown of the central incisor. Conclusion : It is possible to predict three dimensional relationship between the impacted mesiodens and the maxillary central incisors in the panoramic images, but more details should be confirmed by the CT images when necessary.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.176-179
• /
• 2011

Adenomatoid odontogenic tumors represent 3 to 7 percent of all odontogenic tumors. These tumors are more common in the maxilla than the mandible and usually include the anterior region. Clinically, the most common symptom is painless swelling and the tumor is associated with an unerupted tooth, typically a maxillary or mandibular cuspid. The adenomatoid odontogenic tumor appears radiographically as a unilocular radiolucency around the crown of an impacted tooth, resembling a dentigerous cyst. More often, it contains fine calcifications. Histopathologically, there is a thick wall cystic structure with a prominent intraluminal proliferation of the odontogenic epithelium. The most striking pattern is varying-sized solid nodules of spindle-shaped or cuboidal epithelial cells forming nests or rosette-like structures with minimal stromal connective tissues. Conspicuous within the cellular areas are structures of tubular or duct-like appearance. The duct-like spaces are lined with a single row of cuboidal or low columnar epithelial cells, of which the ovoid nuclei are polarized away from the luminal surface. Small foci of calcification may also be scattered throughout the tumor. These have been interpreted as abortive enamel formations. In some adenomatoid odontogenic tumors, the material has been interpreted as dentoid or cementum.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.1-18
• /
• 1978

Three Pinus densiflora populations as shown in location map (Fig. 1) were studied in 1977. These succeed the population numbers 10, 11 and 12 after the preceeding populations. Following the previous study methods, 20 trees were chosen from each population and the morphological characteristics such as tree forms, branching habit, needle and wood properties were investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 40 to 45. The growth performances of trees of population 10 and 11 was similar, but 12 seemed to be inferior more or less. 2. The ratios of clear bole length was 0.53 in population 12 as the highest but 0.43 for population 10 as the lowest. 3. The population 12 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown length) 1.65 though the mean branching angle indicates almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between populations as shown in Fig. 3 and 4. 5. No inter-population differences in serration density of needle was shown but significant inter and intra-population and individual differences (within population) in number of stomata rows and resin duct. 6. Population 12 shown 0.119 of resin duct index as the maximum. 7. The pattern of diameter growth, analyses based on the width of 10-year-ring segment unit (for example, the 1st segment denotes the width between pith center and 10th year ring and the 2nd one is from 11th to 20th year ring and so on.), was alike among populations as shown in Fig. 9. 8. No significant differences between population in mean summer wood percentages as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 10 and 11 however vice versa in population 12. 9. The fiber length was increased with the increase of age but no differences between populations as shown in Fig. 12.

• Journal of Korean Society of Forest Science
• /
• v.44 no.1
• /
• pp.1-25
• /
• 1979

Six natural populations of Pinus densiflora S. et Z. as shown in the location map (Flg 1) were studied during 1978. The numerial pouplation codes, 13 to 18. The results of populations 1 to 12 were reported in previous papers. Following the study methods described before, 20 trees were sampled from each population and morpological characteristics such as stem forms, branching habit needle and wood properties investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 36 to 97 of years. The growth performances of trees of population 14. 15 and 18 was similar, but 13, 16, and 17 seemed to be inferior more or less. 2. The ratios of clear bole length were 0.70 in population 18 as the highest but 0.28 for population 16 as the lowest. 3. The population 17 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown height) 158 though the branching angles were almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between population as shown In Fig. 3 and 4. 5. As to the serration density, number of stomata row and resin duct; the significant differences exist between individual trees within population and also between populations. 6. Population 18 shown resin duct index 0.119 as the maximum. 7. The patterns of diameter growth, based on the width of 10-year-ring segment unit(for example, the 1st segment denotes the with between pith center and 10th year ring and the 2nd one is from 11th to 20th ring and so on.), were alike among populations as shown in Fig 9. 8. Significant differences between population in mean summer wood percentage as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 14, 18 however vice versa in population 13, 15, and 17. 9. The fiber length was mereased with the increased of age but no differences between populations as shown in Fig. 12.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.44-52
• /
• 1987

For the favorable performance of a D.I. diesel engine, it is important to improve the mixture formation process and the ensuing early stage of combustion process. In the present paper, high speed photography was employed to investigate the effectiveness of a cavity digged in a piston crown for some more useful utilization of air. The cavity would function to improve mixing of fuel and air by the increase of turbulence of air and by the impingement of fuel spray on the cavity wall. The results obtained are summarized as follows: (1) From an aspect of thermal efficiency, it is effective to inject the spray tangentially to the cavity wall to enlarge the area of spray evaporation. (2) some deductions obtained from previous investigations using a hot air stream duct are supported by the present results. For example, it is effective for the quick development of flames throughout the combustion chamber to mix the evaporated fuel of main spray with the intermediates brought about by the early stage of combustion of the preceded auxiliary fuel spray.

• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.9-25
• /
• 1977

As a successive work of the variation studies of natural Pinus densiflora stands, some characteristics of individual trees of the three natural populations selected from the Kwang-won Province, the middle-east part of Korean peninsula, as shown in the location map, were investigated. And the statiscal differences between individuals within population, and between populations were analysed. Twenty trees from each population were selected for this study purpose. Doing this, those trees lagged in growth, usually showing poorer form, were eliminated. The results obtained are summarized as follows: 1. Though the average population ages had the ranage between 50 and 63, the growth of height or diameter was similar. Population No.9 is, however, considered to have better tree forms at glance. Population No.8 showed the heighest value not only in the clear-stem-length ratio. 0.53 but also in the crown-index 0.91. The higher value can be result from those trees having long lateral branches and relatively short crown height, meaning undesirable crown shape. In regard to the fine branchedness and the acuteness of branching angle, the population No.9. is considered to be a better one, whereas there was almost no difference in crown height among populations. 2. Checking the frequency distributions of the ratio of the clear-stem-height to the total height and the crown-indices, some difference between populations are considered. These might be attributed to the previous way of stand mangement which alters the density. 3. In the serration density, the average number of 54 per 1cm needle length, the significant differences exist between individual trees within population but not between populations. A few trees which extremly high serration density were observed. As in serration, so tendencies were in the number of stomata row and resin duct. 4. The population 8 had the resin duct index value of 0.074 as the highest which was twice or triple of the other ones. 5. The patterns of increasing process of the average 10-year-ring-segment were not similar till the 30 years of age, but beyond this, the tendency lines were aggregated. 6. Regading the average summer wood ratio, no diffrence between populations, but in the ranges, i.e. 23 to 30 in population No.8. and 16 to 36 in population No.9., with regad to the specific gravity of wood, there were hardly observed any difference between populations even in the ranges values. As the increase of tree ages, the increase of specific gravity was followed but the increasing patterns were not similar between populations. 7. No significant differences between populations in the average tracheid length and the range were detected. However, the length was increased according to the age increase. The increasing pattern was same between populations.