• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.6
• /
• pp.1-15
• /
• 2013

The present Namgang Dam had been completed in 2000, Salix subfragilis communities began to form in 2003 and their distribution area have been rapidly extended into nine times in 2010. In order to deduce correlation between water level and distribution of Salix subfragilis communities under this background in Namgang-dam reservoir, distribution characteristics and widening direction of Salix subfragilis communities have been analyzed by aerial photographs and water levels has been reviewed, also heights and ages of Salix subfragilis have been surveyed in field. The water levels of Namgang-dam related germination of Salix subfragilis have been analyzed in May and June from 2000 to 2010, mean water level, minimum water level and maximum water level were 37.87m, 36.99m and 38.82m, respectively. The oldest ages were 9-13 years, average diameters of breast height, average heights, average numbers and average crown area were respectively 3.9-8.8cm, 3.8-7.5m, $0.53/m^2$ and $0.98m^2/m^2$ in sites. Therefore, this results showed that the first recruitment of Salix subfragilis was in May 2002 when water levels have been maintained as 38.76-41.31m and the widening of Salix subfragilis communities was in May 2004 and 2005 when mean minimum water levels have been maintained as 38.76-41.31m. Salix subfragilis communities formed climax forest in Namgang-dam shore, this phenomena were different from the succession processes of Salix in rivers appeared landforming by deposition of sediment.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.304-312
• /
• 2016

PURPOSE. The aim of this study was to investigate the stress distribution of 2-short implants (2SIs) installed in a severely atrophic maxillary molar site. MATERIALS AND METHODS. Three different diameters of internal connection implants were modeled: narrow platform (NP), regular platform (RP), and wide platform (WP). The maxillary first molars were restored with one implant or two short implants. Three 2SI models (NP-oblique, NP-vertical, and NP-horizontal) and four single implant models (RP and WP in a centered or cantilevered position) were used. Axial and oblique loadings were applied on the occlusal surface of the crown. The von Mises stress values were measured at the bone-implant, peri-implant bone, and implant/abutment complex. RESULTS. The highest stress distribution at the bone-implant interface and the peri-implant bone was noticed in the RP group, and the lowest stress distribution was observed in the 2SI groups. Cantilevered position showed unfavorable stress distribution with axial loading. 2SI types did not affect the stress distribution in oblique loading. The number and installation positions of the implant, rather than the bone level, influenced the stress distribution of 2SIs. The implant/abutment complex of WP presented the highest stress concentration while that of 2SIs showed the lowest stress concentration. CONCLUSION. 2SIs may be useful for achieving stable stress distribution on the surrounding bone and implant-abutment complex in the atrophic posterior maxilla.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.697-706
• /
• 2022

The effect of varied light intensities on the growth of daughter plants during propagation and after transplant to raised beds were examined in 'Sulhyang' strawberry. To this end, four treatments in controlling solar radiation inside a plastic house were made: 55% retractable shading and 35, 55, and 75% fixed shading. The plastic house was shaded only from 11:00 to 16:00 in June and 10:00 to 16:00 in July to September for the treatment of 55% retractable shading. The mean solar radiation inside the plastic house in the retractable 55% shading treatment was 317 W·m^-2 and those in the 35, 55, and 75% fixed shading treatments were 183, 165, and 116 W·m^-2, respectively, at 10 o'clock in the morning. The 55% and 75% fixed shading resulted in taller daughter plants with wider leaf areas than 55% retractable shading. The retractable shading also showed higher leaf numbers, crown diameters, root weights, and fresh weights compared to fixed shading treatments. Regarding the inorganic element contents, daughter plants grown under 75% fixed shading had 1.35% total nitrogen content followed by 1.19% in 35% fixed shading, 1.14% in 55% fixed shading, 1.14% in open culture, and 1.10% in 55% fixed shading. After 54 days following the transplant of daughter plants to a raised bed, the fresh weight of the aboveground part was the heaviest in the 55% retractable shading and non-shading treatments. The 75% fixed shading treatment had the lowest fresh weight of the aboveground plant parts. The results of this study could be used for the production of high-quality daughter strawberry plants.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.964-972
• /
• 2010

Objective of this research was to determine the influence of physico.chemical properties of root substrates on growth of daughter plants that were developed through plastic bag cultivation of mother plants in 'Seolhyang' strawberry propagation. Six different formulations of root substrates for daughter plant cultivation were peatmoss + vermiculite (5:5, A), peatmoss + perlite (7:3, B), coir dust + perlite (7:3, C), coir dust + peatmoss + perlite (3.5:3.5:3.0, D), rice-hull + coir dust + perlite (2:7:1, E), and rice hull + coir dust (3:7, F). The 10 cm plastic pots filled with formulated substrates were located near the plastic bag where mother plants were growing. Then the runners and daughter plants originated from mother plants were fixed on each root substrate filled into 10 cm plastic pot and daughter plants were grown in the plastic pots. The container capacity and air space showed big differences among substrates tested. The substrates E and F had the less container capacity and the higher air space than other substrates tested. This indicates that the two substrates would have difficulties in water managements during the raising of daughter plants. The substrates of A, B, and D which contained peatmoss in formulation had higher nitrogen concentrations than those containing coir dust or rice hull. The substrates of E and F which contained rice hull had lower nitrogen, phosphorus and potassium concentrations than those that contained coir. The crown diameters of daughter plants grown in substrate A were around 13 mm which is thicker than those grown in other substrates. The fresh weights of daughter plants grown in A substrate were the heaviest followed by C, F, D, E, and B. The dry weight of daughter plants showed similar tendency to those of fresh weight. The daughter plants which had heavy fresh and dry weights and thick crown diameter are considered good seedlings. Based on this justification, the substrates of A, C and F are acceptable for daughter plant growth of 'Seolhyang' strawberry.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.144-151
• /
• 2012

Diagnosis of nutrient disorders in cultivating crops is based on the visual symptoms and results of soil and plant analysis. This study was carried out to investigate the influence of B concentrations in fertilizer solution on the growth of and nutrient uptake by domestically bred strawberries. Tissue analysis based on the dry weight were also conducted to determine the threshold levels in plants when toxicity developed in boron. The growth was seriously restricted in the three strawberry cultivars as the B concentrations in fertilizer solution were elevated. The fresh and dry weights were heavier and crown diameters were thicker in the 0.25 mM boron treatment than the other treatments tested. The toxicity symptoms of boron appeared on the older leaves of three strawberry cultivars while interveinal chlorosis symptoms appeared on the young leaves of 'Keumhyang' and 'Seolhyang' strawberries. The toxicity symptoms in lower leaves were developed when B concentrations in fertilizer solution were higher than 2 mM in 'Keumhyang' and 0.5 mM in 'Maehyang' and 'Seolhyang' strawberries. The elevated boron concentrations in fertilizer solution did not influence the tissue K, Ca, and Mg contents, but influenced the phosphorus contents with decreasing tendency. The tissue Fe and Zn contents decreased and increased, respectively, as the B concentrations in fertilizer solution were elevated. When the concentration of boron at which the growth of a plant is retarded by 10% is regarded as a upper threshold level, the boron contents based on dry weight of above ground plant tissue should be lower than 25.1, 44.2, and 62.5 $mg{\cdot}kg^{-1}$ in 'Keumhyang', 'Maehyang', and 'Seolhyang' strawberries, respectively.

• Explosives and Blasting
• /
• v.39 no.3
• /
• pp.15-23
• /
• 2021

Ventilation shafts are pathways in mines and tunnels for the removal of dust or smoke during underground space construction and operation. In mines, blasting with long blast holes is preferred for the excavation of a ventilation shaft in the 10~20m long crown pillar section. In this case, the bottom part of the blast hole is completely drilled in order to determine the drilling error, and this causes a problem of lowering the explosive charge and blasting efficiency. It is possible to solve the problem of explosive loading and to increase the blast efficiency by covering the curb of the blasthole by using stemming material. In this study, simulations for the blasting of a ventilation shaft were performed with various stemming lengths and the blasthole diameters(45, 76mm) using AUTODYN 2D SPH(Smooth particle hydrodynamics) analysis technique. Also the optimal bottom stemming column was derived by checking the size of the boulder and burden line according to blasting. Analysis result, blasting efficiency is lessened in case of stemming length less than 30cm and the optimal length of the stemming material should be 30cm or higher to achieve high efficiency of blasting.

• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.407-420
• /
• 1988

The primary objective of this study was to make the prediction percentile tabulation of the sum of mesiodistal widths of the unerupted permanent canines and premolars derived from the sum of mesiodistal widths of the erupted permanent incisors in normal and crowding groups. Crowding group consisted of 85 pairs of dental casts (42 males and 43 females) with more than 4mm of crowding in anteriors. Normal group consisted of 109 pairs of dental casts (65 males and 44 females) with less than 1mm of spacing or crowding in anteriors. The mesiodistal crown diameters of permanent teeth were measured from the dental casts using the sliding calipers (Mitutoyo Co., Japan). From the study, the obtained results were as follows: There were not significant differences between male and female in both groups on the basis of the ratios between the sum of mesiodistal widths of incisors and the sum of mesiodistal widths of canines and premolars. There was not significant difference between two groups on the basis of the ratio between the sum of mesiodistal widths of mandibular incisors and the sum of mesiodistal widths of mandibular canines and premolars and was significant differences between two groups on the basis of the ratio between the sum of mesiodistal widths of mandibular incisors and the sum of mesiodistal widths of maxillary canines and premolars. There was significant difference between two groups on the basis of the ratio between the sum of mesiodistal widths of maxillary incisors and the sum of mesiodistal widths of mandibular canines and premolars. There was significant difference between two groups on the basis of the ratio between the sum of mesiodistal widths of maxillary incisors and the sum of mesiodistal widths of maxillary canines and premolars. The percentile prediction tabulations were made in an attempt to predict the sum of mesiodistal widths of the unerupted permanent canines and premolars derived from the sum of mesiodistal widths of the erupted permanent mandibular incisors in each group. The percentile prediction tabulations were made in an attempt to predict the sum of mesiodistal widths of the unerupted permanent canines and premolars derived from the sum of mesiodistal widths of the erupted permanent maxillary incisors in each group.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.115-126
• /
• 2000

Dental arch expansion is one of the method used to solve the dental crowding problem by non-extraction. Many formulae using tooth size have been suggested to predict ideal inter-premolar and inter-molar width. The purpose of this study was to evaluate the adequacy of some upper dental arch width prediction methods, namely Pont's method, Schmuth's method and Cha's method. The sample consisted of the casts of 119 Korean young adults who had no muscular abnormality, no skeletal discrepancy, and Angle's Class I molar relationships. Measurements were obtained directly from plaster casts; they Included mesiodistal crown diameters of the four maxillary incisors, as well as maxillary inter-first-premolar and inter-first-molar arch widths as specified by Pont. The correlation coefficients between the sum of incisors(SI) and upper dental arch width were calculated. The differences between predicted width and actual width were classified as overestimated, properestimated, and underestimated. The data obtained from each group were analyzed for statistical differences. The results were as follows : 1. Upper dental arch width indices were calculated from SI in normal occlusion (81.96 : premolar index, 62.55 : molar index). 2. Low correlations between SI and arch width were noted in normal occlusion (0.50 in the inter-premolar width, 0.39 in the inter-molar width). 3. Pont's formula and Schmuth's formula tended to overestimate the inter-premolar width. A more even distribution of estimates was noted in Cha's fomula. 4. Cases within $\pm$1 mm range of observed inter-premolar width were $45\%$ in the Cha's formula, $40\%$ in the Pont's formula, and $39\%$ in the Schmuth's formula. 5. All formulae had a tendency to underestimate the inter-molar width, but Cha's formula had better predictability than others. 6. Cases within $\pm$1 mm range of observed inter-molar width were $40\%$ in the Cha's formula, $29\%$ in the Pont's formula, and $13\%$ of Schmuth's formula. The data presented in this study does not support the clinical usefulness of ideal arch width prediction methods using the mesiodistal width of maxillary incisors.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.7-16
• /
• 1985

To grasp canonical correlations, their related backgrounds in various growth factors of stem, the characteristics of stem by synthetical dispersion analysis, principal component analysis and canonical correlation analysis as optimum method were applied to Larix leptolepis. The results are as follows; 1) There were high or low correlation among all factors (height ($x_1$), clear height ($x_2$), form height ($x_3$), breast height diameter (D. B. H.: $x_4$), mid diameter ($x_5$), crown diameter ($x_6$) and stem volume ($x_7$)) except normal form factor ($x_8$). Especially stem volume showed high correlation with the D.B.H., height, mid diameter (cf. table 1). 3) (1) Canonical correlation coefficients and canonical variate between stem volume and composite variate of various height growth factors ($x_1$, $x_2$ and $x_3$) are ${\gamma}_{u1,v1}=0.82980^{**}$, $\{u_1=1.00000x_7\\v_1=1.08323x_1-0.04299x_2-0.07080x_3$. (2) Those of stem volume and composite variate of various diameter growth factors ($x_4$, $x_5$ and $x_6$) are ${\gamma}_{u1,v1}=0.98198^{**}$, $\{{u_1=1.00000x_7\\v_1=0.86433x_4+0.11996x_5+0.02917x_6$. (3) And canonical correlation between stem volume and composite variate of six factors including various heights and diameters are ${\gamma}_{u1,v1}=0.98700^{**}$, $\{^u_1=1.00000x_7\\v1=0.12948x_1+0.00291x_2+0.03076x_3+0.76707x_4+0.09107x_5+0.02576x_6$. All the cases showed the high canonical correlation. Height in the case of (1), D.B.H. in that of (2), and the D.B.H, and height in that of (3) respectively make an absolute contribution to the canonical correlation. Synthetical characteristics of each qualitative growth are largely affected by each factor. Especially in the case of (3) the influence by the D.B.H. is the most significant in the above six factors (cf. table 2). 3) Canonical correlation coefficient and canonical variate between composite variate of various height growth factors and that of the various diameter factors are ${\gamma}_{u1,v1}=0.78556^{**}$, $\{u_1=1.20569x_1-0.04444x_2-0.21696x_3\\v_1=1.09571x_4-0.14076x_5+0.05285x_6$. As shown in the above facts, only height and D.B.H. affected considerably to the canonical correlation. Thus, it was revealed that the synthetical characteristics of height growth was determined by height and those of the growth in thickness by D.B.H., respectively (cf. table 2). 4) Synthetical characteristics (1st-3rd principal component) derived from eight growth factors of stem, on the basis of 85% accumulated proportion aimed, are as follows; Ist principal component ($z_1$): $Z_1=0.40192x_1+0.23693x_2+0.37047x_3+0.41745x_4+0.41629x_5+0.33454x_60.42798x_7+0.04923x_8$, 2nd principal component ($z_2$): $z_2=-0.09306x_1-0.34707x_2+0.08372x_3-0.03239x_4+0.11152x_5+0.00012x_6+0.02407x_7+0.92185x_8$, 3rd principal component ($z_3$): $Z_3=0.19832x_1+0.68210x_2+0.35824x_3-0.22522x_4-0.20876x_5-0.42373x_6-0.15055x_7+0.26562x_8$. The first principal component ($z_1$) as a "size factor" showed the high information absorption power with 63.26% (proportion), and its principal component score is determined by stem volume, D.B.H., mid diameter and height, which have considerably high factor loading. The second principal component ($z_2$) is the "shape factor" which indicates cubic similarity of the stem and its score is formed under the absolute influence of normal form factor. The third principal component ($z_3$) is the "shape factor" which shows the degree of thickness and length of stem. These three principal components have the satisfactory information absorption power with 88.36% of the accumulated percentage. variance (cf. table 3). 5) Thus the principal component and canonical correlation analyses could be applied to the field of forest measurement, judgement of site qualities, management diagnoses for the forest management and the forest products industries, and the other fields which require the assessment of synthetical characteristics.