• Journal of Environmental Science International
• /
• v.15 no.4
• /
• pp.325-332
• /
• 2006

The purpose of this paper is to suggest practical suggestions to mitigate Urban Heat Island(UHI) problems in Daegu regarding urban surface temperature. Urban street trees's size and the relations between urban land use types and surface temperature are analysed using aerial photos, the numerical value map and Landsat TM image with special reference to Jung-gu. Total urban street tree's crown size is $156,217.6m^2$ and it is equal to 2.24% of study area. In addition, the size of 'city and residential area' is $6,681,870m^2$(95.7% of study area), which causes UHI and the total size of 'river' shows the lowest surface temperature area and 'road' and 'business and service area' are the highest surface temperature zones. Therefore, it is probable that the network between urban street trees and the lowest surface temperature areas mitigate UHI effects.

• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.567-576
• /
• 2020

Considerable controversy surrounds the choice of the best abutment type for implant prosthetics. The two most common structures are hex and non-hex abutments. The non-hex abutment typically furnishes a larger contact area between itself and the implant than that provided by a hex structure. However, when a hex abutment is loaded, the position of its contact area may be deeper than that of a non-hex abutment. Hence, the purpose of this study is to determine the different biomechanical behaviors of an internal bone-level implant based on the abutment type-hex or non-hex-and clinical crown length under static and cyclic loadings using finite element analysis (FEA). The hex structure was found to increase the implant and abutment stability more than the nonhex structure among several criteria. The use of the hex structure resulted in a smaller volume of bone tissues being at risk of hypertrophy and fatigue failure. It also reduced micromovement (separation) between the implant components, which is significantly related to the pumping effect and possible inflammation. Both static and fatigue analyses, used to examine short- and long-term stability, demonstrated the advantages of the hex abutment over the non-hex type for the stability of the implant components. Moreover, although its impact was not as significant as that of the abutment type, a large crown-implant ratio (CIR) increased bone strain and stress in the implant components, particularly under oblique loading.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.194-206
• /
• 1998

In 1977, Local governments' planting regulations for the development projects were established in accordance with the revised building law in Korea. A landscaped area, planting densities of trees and shrubs, a percentage of evergreen plants, minimum tree size and species were prescribed in the planting regulations. But the clauses for an excessive planting density and a high ratio of evergreen trees that the regulations includes, have been gradually in the way to a creative planting design, and raise a problem of poor growth of trees an a disordered planting landscape. Therefore, in this study the present planting regulations of 124 local governments throughout the country were analyzed and compared with 13 foreign local governments' of 4 countries ; Japan, the United States of America, Canada and Singapore. And the linitations and characteristics of the regulations are drawn as follows ; 1. The regulations focus on controlling the green spaces and plantings by quantitative methods such as controlling the number of trees and the landscaped area, which are inadequate for estimating the crown coverage of mature trees, and which areinadequate for estimating the crown coverage of mature trees, and implementing the function of polantings and the use of green spaces. 2. Minimums of tree densities are higher than those of foreign countries, especially higher about 10 times to 100 times than those of the United States of America. 3.Excessive number of evergreen trees and fruit trees should be planted under the present planting regulations, that results in constricting the creativity in planting design. 4. An article for using specific tree size, 2.0ms over in height makes it difficult to use a wide variety of different sizes of trees. And there is no incentive measures when larger trees are planted. To enhance the quality of green spaces and plantings, it is needed that the function and locating of green spaces and plantings have to be emphasized, and the planting density should be concerned about the mature tree size. The incentive measure to use various sizes of trees is also needed, and the regulations to use excessive number of evergreen trees or fruit trees should be loosened.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.173-180
• /
• 2007

There was a great problem about the deposition between materials of a different kind at the beginnings of the introduction of porcelains, however, thereafter the deposition efficiency was settlded to the sufficient level of all user thanks to effort to have studied by many scholars and clinical authorities. But in a clinical process, as the difference of designs has an effect on fractures of porcelains, this researcher divided them into 4 groups of A: 1 mm, B: 2 mm, C: 3 mm, and D: 4 mm, and made 40 pieces to each 10 as the test samples to consider a length axis of tooth for studies in accordance with a position of a finishing line to meet between porcelain and metal at the contact point at the adjacent side to a metal porcelain. The sample materials are those to be use at the open market and the test samples wer completed by the same manufacturing technique to that of existent metal porcelain tube. s a result of the strength test on fractures, the average value is as in the following, A: 1 mm - 8.5bar, B: 2 mm - 10.5bar, C: 3 mm - 14.3bar, and D: 4 mm - 15.0bar. In case of the metal porcelain tube, the more faraway to process parts of metal and porcelain from the contact point of adjacent side has the stronger strength of fractures, Accordingly, the research shows that it had better to keep off more than 3 to consider a ledngth axis of tooth.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.20-27
• /
• 2008

This study was conducted to investigate the influence of thinning and pruning on characteristics of forest stand, mesopore ratio and soil water content at the Pinus koraiensis stands in Gwangneung, Gyeonggido. The Pinus koraiensis had been planted in 1976 and thinning and pruning were carried out in 1996. A sample area survey was conducted at experimental plots (thinned and unthinned) in 1998 and 2005, and mesopore ratio and soil water content have been monitored from 2000 to present. Average tree height of the thinned plot increased from 10.9m to 13.2m and from 10.3m to 12.8m for the unthinned plot. Average D.B.H of the thinned plot increased from 15.9cm to 21.1cm and from 14.5cm to 16.7cm for the unthinned plot during the period 1998-2005. Crown density at the thinned plot increased from 81.5% to 95.0% and from 89.5% to 95.0% for the unthinned plot during the period 1998-2005. Mesopore ratio (pF2.7) of A layer soil at the thinned plot was 40.1% while that of the unthinned plot was 37.3%. Changes of mesopore ratio at unthinned plot were not associated with stand age, but those at thinned plot had increased and then decreased, showing declining of the practice effect. Average soil water content at the thinned plot were 23.7% and 22.4% for the unthinned plot. Soil watercontents at both plots have been increased with increase in stand age. But the difference of soil watercontent at each plot has been decreased, especially at the depth of 10cm.

• The Journal of the Korean dental association
• /
• v.58 no.2
• /
• pp.83-92
• /
• 2020

In the anterior maxillary area, dental implants for tooth replacement are challenging due to the need to satisfy high esthetic level as well as functionality. Immediate implant placement and provisionalization can dramatically reduce the edentulous period, and then fulfill patient's demand for esthetics. The aim of present case report is to demonstrate two cases that successfully restored single tooth with immediate implant placement and provisionalization in the anterior maxillary area. A 47 years old female was scheduled to replace her maxillary right central incisor due to crown-root fracture by trauma. Another 54-year-old female was planned to place dental implant following tooth extraction of maxillary right lateral incisor owing to continuous pus discharge despite repetitive treatments including apicoectomy. In these two cases, surgical and prosthetic procedures progressed in a similar way. After minimal flap elevation, atraumatic tooth extraction was performed. Implant was placed in proper 3-dimensional position and angulation with primary stability. Bone graft or guided bone regeneration for peri-implant bone defect was conducted simultaneously. Provisionalization without occlusal loading was carried out at the same day. Each definitive crown was delivered at 7 and 5 months after the surgery. Two cases have been followed uneventfully for 2 to 5 years of loading time. In conclusion, Immediate implant placement and provisionalization could lead to esthetic outcome for single tooth replacement with dental implant under proper case selection.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the accuracy of single crowns based on the type of occlusal surface. Methods: A single crown wax pattern was fabricated in three types of occlusal surface. The prepared wax pattern was replicated with silicone, and stone was injected to create a stone model. The prepared specimens were scanned using a model scanner. Scans were classified into three groups, and each scan was performed six times to analyze the trueness and precision of a single crown. In addition, only the occlusal surface area was analyzed for trueness and precision. Data were analyzed using the Kruskal-Wallis H test, a nonparametric test (α=0.05). Results: With regard to the trueness value of the occlusal scan area, the no occlusal tooth attrition (NA) group showed the largest error of 3.5 ㎛, and the complete occlusal tooth attrition (CA) group showed the lowest value of 3.1 ㎛. The NA group had the greatest precision, and the medium occlusal tooth attrition (MA) group and CA group showed a low precision value of 3.2 ㎛; the difference between the groups was statistically significant (α=0.05). In the color difference map, the CA group showed a lower error than the NA group. Conclusion: The occlusal surface with severe attrition had excellent accuracy, but the accuracy of the group without attrition was low. There were significant differences between groups, but clinically acceptable values were shown.

• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.163-169
• /
• 2021

Background: Understanding the habitat characteristics of the endangered Siberian flying squirrel Pteromys volans is the first step in conserving and managing the forests it requires for nesting, gliding, and feeding. Therefore, in the present study, we characterized the habitats of P. volans using GIS analysis of 411 forest sites in South Korea where fecal droppings were found. Results: Fecal signs of P. volans were found in various regions in South Korea, including the Baekdudaegan Mountains. GIS analysis with six environmental layers (vegetation type, wood-age class, diameter at breast height [DBH], crown density, elevation, and distance from stream) revealed that fecal signs of P. volans were more frequently found in broad-leaved deciduous forests (42%) located 200-399 m above sea level (43.1%) and 0-199 m from the nearest stream (53%), with 5th class wood-age (35.3%), middle size class DBH (51.1%), and high crown density (71%). Conclusions: The present study provides information on the biotic and abiotic characteristics of P. volans habitats. In South Korea, the fecal droppings of P. volans were found predominantly old deciduous broadleaf forests. Further studies are needed to reveal whether the more frequent occurrence of P. volans dropping in broadleaf forests may be due to a particular preference of this species for the forests or to a simple reflection of the area of the broadleaf forests occupying a much larger area than other forest types in Korea.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.3
• /
• pp.1-9
• /
• 2001

The purpose of this study was to evaluate the burning impacts of the surface and crown fire occured in yongsan-ri meongsok-myun of chinju-city, Gyeongnam. Environmental influences like surface runoff and soil erosion changes were investigated by comparisons analysis between burned and unburned area about some initial effects after fire. The results obtained from this study were as followed; 1. The average amount of surface runoff in burned area was more 1.7 times than in unburned area. But it was gradually tend to decrease in burned area as times passed. 2. Factors significantly correlated to amount of surface runoff in burned area shown in order to unit rainfall, accumulated rainfall and sand content, as 0.9466 of multiple correlation coefficient, where as the factors in unburned area were unit rainfall, soil erosion, bulk density and soil hardness, as 0.9738 of multiple correlation coefficient. 3. The average amount of soil erosion in burned area was more 11.2 times than in unburned area. But it was gradually tend to decrease in burned area as times passed. 4. Factors significantly correlated to amount of soil erosion in burned area were surface runoff and unit rainfall, as 0.6305 of multiple correlation coefficient. The factors in unburned area shown in order to surface runoff, sand content, bulk density and unit rainfall, as 0.7879 of multiple correlation coefficient.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.4
• /
• pp.1-11
• /
• 1993

This study was conducted to investigate the plant community structure and to propose ecological management planning for the urban forest on Sungdongku, Joongku and Yongsanku in Seoul. Field survey was excuted October 1991 and the results were as follows. Robinia pseudoacasia community covered 61.1% and Populus x albaglandulosa covered 3.8% of survey site II and survey site was covered by the deciduous-broad leaf mixtured forest. According to the human impact and inappropriate management impact, survey area was divided into five forest community. As for the analysis of plant community structure which was classified into five forest community, the importance values, ecological diversity, number of species, number of individuals, basal area and crown coverage of the native plant community showed relatively higher than community that vegetation deterioration degree by the human impact showed seriously. In landscape forest of Mt. Daehyun, it showed problems for the planting method and the soil condition. So it was proposed to management guide, vegetation restoration and soil management through ecological management planning based on above results.