• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.61-73
• /
• 2014

The dextral strike-slip Yecheon Shear Zone of (E)NE-(W)SW trend is developed in the Pukhumyeon-Pyeongeunmyeon area, Gyeongsangbukdo, in the central part of Sobaeksan Massif, Korea which mainly consists of Precambrian metasedimentary rocks and Mesozoic granite. This paper researched the relative formation time, the deformation temperature, and the distribution of ultramylonite zone of Yecheon Shear Zone from the analysis of their deformed rock structures and microstructures. There are the mylonite foliation and stretching lineation by shear deformation, and the (E)SE-vergence gentle plunging, moderately inclined tight fold defined by the gneissosity and mylonite foliation as ductilely deformed main rock structures. Flame perthites, myrmekites, microfractures, microkinks, kinkband, and undulatory extinction are recognized as characteristic microstructures in feldspars during ductile shear deformation. Patterns of c-axis fabrics of recrystallized quartz aggregate display single girdle and type I crossed girdle where the rhomb and basal slip systems are predominant. The shearing senses on sense-of-shear plane show top-to-the-NE and top-to-the-SW on the predominant NW-dipping and subordinate SE-dipping mylonite foliations, respectively. These characteristic rock structures and microstructures suggest that the Yecheon ductile shearing occurred under $350{\sim}450^{\circ}C$ deformation temperature after the tight folding. The (E)NE trending ultramylonite zone of Yecheon Shear Zone, which passes through the Pulnobong and the north part of Pakdalsan, is established from the zonal distribution of Precambrian metasedimentary rocks and the grain-size distribution of feldspars in the Precambrian metasedimentary rocks and quartzs in the Mesozoic granite.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.53-68
• /
• 1998

Microstructural and rock structural analyses on the deformed Cheongsan granite characterized by abundant K-feldspar megacrysts have been carried out to understand the temperature condition for the ductile shear deformation. In K-feldspar, microkinks, microfractures and core-and-mantle structures without the development of subgrains in outer core-zone are the most common microstructures observed. Myrmekites and flame perthites are developed at the strain-localized areas along the microfractured K-feldspar. In plagioclase, microfractures, deformation twins and kink bands are predominant. The deformation twins cut across the igneous zonation of the plagioclase. Patterns of c-axis fabrics of dynamically recrystallized new quartz grains display single girdle and type II crossed girdle where prism slip system is predominant. These characteristic microstructures produced during the ductile shearing suggest that the ductile shear deformation in the Cheongsan granite occurred under epidote-amphibolite conditions($400-500^{\circ}C$). Three main shear zones are recognized at outcrop scale: discrete shear zone with anastomosing high-strain domain, shear zone with pervasive S-C structure and shear zone with homogeneously foliated domain. Geometric features of these shear zones produced during the ductile shear deformation are controlled by amount of strain under the $400-500^{\circ}C$ deformation temperature.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.2
• /
• pp.25-32
• /
• 2021

There is a need to breed and distribute of domestic varieties for Lilium longiflorum because most of the lily bulbs cultivated in Korea were imported from foreign country. The L. longiflorum 'Ace' and 'Nellie White' collected from 1996 had been self-crossed from 1996 to 2010. In 2012, the L. longiflorum 'Bright LoSong' was developed as a F₁ hybrid crossed between 'L₂-17-4' and 'L₂-16-6' that obtained by 7th self-fertilization. The 'Bright LoSong' was tested for homogeneity, regional adaptability test, consumer preference show from 2014 to 2015, and it was registered in 2017. The flower of 'Bright LoSong' is a trumpet shaped single flower with no spots.It has 5.8 flowers per plant, which is a relatively many number compared control 'Mount Carmel', Its flower diamater is 9.8cm, relatively a bit small size. And the flower inflorescence has umbel or raceme while the attitude of longitudinal axis is horizontal. The plant height is 38.4cm with 30.8 leaves per plant and 1.9cm of the leaf width. 'Bright LoSong' has a longer flowering period because of relatively small diameter or many number of flowers than those of the control 'Mount Carmel'. Thus, the 'Bright LoSong' showed a high consumer preference, and the cultivar has the advantage of being able to reproduce since the parents are pure lines.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.2
• /
• pp.23-28
• /
• 2022

There is a need to breed and distribute of domestic varieties for Lilium Asiatic hybrids because most of the lily bulbs cultivated in Korea bred from foreign country. The collected Lilium Asiatic hybrids 'Butter Pixie' for a maternal line, 'Mona' for a paternal line based on the genetic resources from 2000 had been crossed self-fertilization from 2000 to 2006. In 2008, We developed Lilium Asiatic 'Yellow LiASong' as a F₁ hybrid which was crossed 'L₂-18-1' and 'L₂-21-4' those obtained by 4th self-fertilization. The flower of 'Yellow LiASong' is a bowl shaped single flower with no spots that 5.8 flowers per plant, which is a relatively many number compared other cultivars, and 15.5cm flower diameter with a medium size. And the flower inflorescence has umbellate and racemose while the attitude of longitudinal axis is erect. The plant height is 36.2cm with 35.5 leaves per plant and 10.7cm of the leaf length. Thus, The 'Yellow LiASong' showed a high consumer preference. Which has a longer flowering period due to having a relatively larger diameter and number of flowers than that of 'Tiny Bee', which is a comparable variety.

• The Korean Journal of Zoology
• /
• v.14 no.2
• /
• pp.75-84
• /
• 1971

Genetic analysis of a new wing mutant, Surf wings (Srf), was performed. Mutant flies were extracted from a wild population of Drosophila melanogaster at the vicinity of Atomic Energy Research Institute, Seoul in August-September 1969. 1. The distal half of wings of heterozygotes (Srf/+) turned upwards about 40 degree from body axis, but flying ability was not disturbed. They overlap Cy in low frequency when they are grown below $22^{\circ}C$. This resembles with Si or j series, but wing margins are not rolled and diversed. Postscutellars are erected slightly, but they, in general, are not crossed. Any other external pleiotropic effects were not observed. 2. Penetrance and expressivity of both sexes are not complete. Their extents are variable with sex and temperature. These characters show maximum tendencies when the development is made at $22^{\circ}C$ (female: P = 0.996, E = 0.932, male:P = 0.961, E = 0.698). 3. The preliminary locus of Srf was determined to be 66.8 on the right arm of second chromosome by using recessive maker gene cn bw. 4. The homozygous flies(Srf/Srf) have shown perfect lethality. The heterozygotes (Srf/+), on the other hand, have shown to be viable and fertile. Srf chromosomes are kept in a balanced lethal system with Pm chromosomes which are associated with inversions. Hence, it is partially reasonable to suppose that Srf may persist in a natural population by the same mechanism. 5. Allelism test with Cy was also conducted. The fact that combination with Cy in the trans-phase (+ Srf/Cy +) is viable in contrast to the lethality of Srf/Srf and Pm/Pm indicates that Srf and Cy are not functionally allelic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.553-562
• /
• 2007

In this paper, we designed and implemented the system for telemetering ELF(Extremely Low Frequency) magnetic field intensity. The magnetic field measurement system used a 3-axis magnetic field sensor to measure the magnetic field with isotropy and the equalizer to compensate the frequency characteristic in band. By multiplexing three output signals of the magnetic field sensor in time domain, we got the uniform gain and frequency characteristic among three axes. This system was designed that the magnetic field measurement level range was $0.01{\sim}10.0\;uT$ and the measurement frequency band was $40{\sim}180\;Hz$. The control system would access to the magnetic field measurement system with RF and the maximum access distance was 1.0 km. We confirmed that the measurement level error of the fabricated system was within 5 %. The fabricated system was installed to a golf practice range where a high voltage power transmission line was crossed.

• Physical Therapy Korea
• /
• v.19 no.4
• /
• pp.24-31
• /
• 2012

The aim of this study was to investigate the effectiveness of self-stretching exercises for iliotibial band (ITB) (Side-lying; right hip and knee were flexed to support the pelvis while left hip was extended and adducted, Standing A; side-bending of the trunk on standing with crossed leg, Standing B; same as Standing A, except the hands were clasped overhead and shifted right side, and Standing C; same as Standing B, except moving the arms diagonally downward) to help determine the most effective self-stretching method to stretch ITB. Twenty-one healthy subjects who do not have ITB shortness from Yonsei University (14 men and 7 women) between the ages of 18 to 28 years voluntarily participated. Ultrasound was performed to measure the thickness of the ITB between the long axis of the ITB and the level parallel to the lateral femoral epicondyle during four self-stretching exercises. All data were found to approximate a normal distribution. We used a one-way repeated-measures analysis of variance (ANOVA) to compare the thickness of the ITB among all self-stretching exercises. The level of significance was set at ${\alpha}$=.05. The ANOVA was followed by Bonferroni's correction. The overall mean of ITB thickness was $1.14{\pm}.4$ mm (${\pm}$ standard deviation) in resting status. The change in the ITB thickness in percentages between the tested position of each self-stretching exercises and resting status was significant (p<.05) (Side-lying $26.62{\pm}10.18%$ with 95% confidence interval [CI]=21.99~31.25%; Standing A $29.46{\pm}16.19%$ with 95% CI=22.09~36.84%; Standing B $44.06{\pm}14.82%$ with 95% CI=37.31~50.81%; Standing C $53.76{\pm}12.1%$ with 95% CI=48.25~59.29%). Results indicated significant differences among four self-stretching exercises except Side-lying versus Standing A (p<.01). Based on these findings, the Standing C self-stretching exercise was the most effective in stretching the ITB thickness among four types of ITB self-stretching exercises. Additionally, the Side-lying self-stretching exercise using gravity to stretch the ITB is recommended as a low-load (low-intensity), long-duration stretch.

• Korean Journal of Breeding Science
• /
• v.49 no.4
• /
• pp.390-395
• /
• 2017

A new small red bean cultivar, 'Geomguseul', was artificially crossed between 'Chilbo' and 'SA8412-3-1-4-3-3-2-3' in 1998, fixed excellent agronomic characters by pedigree breeding method, and selected for the further trials with the name of 'Miryang 10'. It was prominent and showed good result, such as high grain quality, lodging resistance, and high-antioxidant activity in the regional adaptation yield trials (RYT) for three years from 2009 to 2011 and released for the public consumption as the name of 'SA9801-24-4-3-1' in 2011. 'Geomguseul' has a semi-determinate growth habit, yellow flower, green embryonic axis, black seed coat, white hilum, and small spherical seed (12.2 grams per 100 seeds). The average yield of 'Geomguseul' was 2.01 MT/ha in the regional yield trials (RYT) carried out for three years from 2009 to 2011 which was a little higher than that (1.98 MT/ha) of the check variety, 'Chungju'.

• Korean Journal of Radiology
• /
• v.23 no.3
• /
• pp.322-332
• /
• 2022

Objective: CT plays a central role in determining the resectability of pancreatic cancer, which directs the use of neoadjuvant therapy. This study aimed to assess the diagnostic accuracy of CT in predicting circumferential resection margin (CRM) involvement in patients with resectable or borderline resectable pancreatic head cancer. Materials and Methods: Seventy-seven patients who were scheduled for upfront surgery for resectable or borderline resectable pancreatic head cancer were prospectively enrolled, and 75 patients (38 male and 37 female; mean age ± standard deviation, 68 ± 11 years) were finally analyzed. The CRM status was evaluated separately for the superior mesenteric artery (SMA) and posterior and superior mesenteric vein/portal vein (SMV/PV) margins. Three independent radiologists reviewed the preoperative CT images and evaluated the resection margin status. The reference standard for CRM status was pathologic examination of pancreaticoduodenectomy specimens in an axial plane perpendicular to the axis of the second portion of the duodenum. The diagnostic accuracy of CT was assessed for overall CRM involvement, defined as involvement of the SMA or posterior margins (per-patient analysis), and involvement of each of the three resection margins (per-margin analysis). The data were pooled using a crossed random effects model. Results: Forty patients had pathologically confirmed overall CRM involvement in pancreatic cancer, while CRM involvement was not seen in 35 patients. For overall CRM involvement, the pooled sensitivity and specificity were 15% (95% confidence interval: 7%-49%) and 99% (96%-100%), respectively. For each of the resection margins, the pooled sensitivity and specificity were 14% (9%-54%) and 99% (38%-100%) for the SMA margin, 12% (8%-46%) and 99% (97%-100%) for the posterior margin; and 37% (29%-53%) and 96% (31%-100%) for the SMV/PV margin, respectively. Conclusion: CT showed very high specificity but low sensitivity in predicting pathological CRM involvement in pancreatic cancer.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.979-995
• /
• 1997

The purpose of this study was to identify the preventive and the progressive inhibitory effects of enamel demineralization with fluoride releasing light-and self-cured orthodontic sealants(FluoroBond), in vitro, under the polarizing light microscope and the scanning electon microscope. The polarizing light microscopic group was subdivided into seven groups(Group A-Group G). The scanning electron microscopic group was also subdivided into seven groups(Group A'-Goup G'). For polarizing light microscopic evaluation, longitudinal sections were made longitudinally by Maruto cutter(Maruto Co., Japan) and Maruto grinding machine(Maruto Co., Japan). Sections were examined and photographed by the polarizing light microscope(Olympus Optical Co., Japan) using crossed polars and with the enamel rod longitudinal axis oriented at $45^{\circ}$ to the extinction position. For scanning electron microscopic evaluation, the specimens were coated with a highly conducting layer of gold palladium in a model Hus-4 high-vacuum evaporator and examined in an ISI-100B scanning electron microcope operated at 20kV. The results of this study were as follows : 1. The mean depths of artificial carious lesions under a polarized light microscope were $Group\;A(5.08{\mu}m),\;Group\;B(47.82{\mu}m,\;Group\;C(8.42{\mu}m),\;Group\;D(7.20{\mu}m),\;Group\;E(85.41{\mu}m),\;Group\;F(60.38{\mu}m),\;Group\;G(60.13{\mu}m)$. 2. There were statistically significant differences in Group B compared with Group A, C, and D(p<0.05), and also, in Group I compared with Group F and Group G(p<0.05). 3. Light-and self-cured orthodontic sealants had the preventive effects of enamel demineralization. 4. Light-and self-cured orthodontic sealants had the progressive inhibitory effects of enamel demineralization. 5. The time progress of demineralizing agent had no influence on the samples of light-and self-cured orthodontic sealants under the scanning electron microscope. 6. There was no difference between the specimens of light-and self-cured orthodontic sealants both in the polarized light microscopic group and in the scanning electron microscopic group.