• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제2권1호
• /
• pp.65-73
• /
• 1999

목 적 : 신생아의 식도 특히 하부 식도 괄약근의 발달은 해부학적으로 미숙하기 때문에 하부 식도 괄약근의 수축력이 낮아 신생아에서 역류와 구토가 잘 일어난다. 식도는 15개월이 되어야 성숙하게 되므로 그 동안 역류와 구토의 빈도가 적도록 돌보아 주어야 한다. 역류와 구토의 빈도를 줄이는 방안으로 섭취한 음식이 위에 머므르는 시간을 단축시킬수 있다면 도움이 될 것이므로 수유의 종류와 수유 후 자세에 따른 위 배출 시간의 영향을 알아 보기 위하여 본 연구를 시행하였다. 방 법: 신생아를 대상으로 초음파검사를 이용하여 수유 종류(모유 및 분유)에 따른 위 배출 시간을 비교하고, 수유 후 자세(앙와위 및 복와위)에 따른 위 배출 시간을 비교해 보았다. 수유 종류에 따른 비교에서 대상아는 모유수유아 15명, 분유수 유아 15명이었고 수유 후 자세는 앙와위를 취하였다. 수유 후 자세에 따른 비교에서는 분유 수유를 하였고 앙와위 15명, 복와위 18명을 대상으로 하였다. 위 전정부 면적은 상장간막 동맥과 대동맥이 지나는 위치에서 5 MHz 컨벡스 초음파 탐촉자로 종단스캔을 하여 초음파 기계에 내장된 컴퓨터에 의해 구하였다. 위 배출 시간은 금식 후 4시간에 위 전정부 면적의 기본 크기를 측정하고 수유 후 즉시, 그 후 30분마다 측정하여 기본 크기로 돌아올 때까지 추적하여 측정하였고 기본 크기로 두번 계속 측정되면 측정을 마쳤으며 처음 기본크기로 돌아온 시간을 위 배출 시간으로 정하였다. 결 과: 1) 수유 종류에 따른 위 전정부 면적 및 위 배출 시간의 비교; (1) 모유수유아를 앙와위로 누인 경우의 위 전정부 면적은 금식 시 $0.59{\pm}0.13\;cm^2$이었고 수유 후 즉시는 $0.70{\pm}0.17\;cm^2$이었으며 수유 후 30분에 최고치에 달하여 $0.82{\pm}0.19\;cm^2$이었고 금식 시 면적의 1.39배였다. 위 배출 시간은 $76.0{\pm}20.02$분이었다. (2) 분유수유아를 앙와위로 누인 경우의 위 전정부 면적은 금식 시 $0.52{\pm}0.08\;cm^2$이었고 수유 후 즉시는 $0.68{\pm}0.10\;cm^2$이었으며 수유 후 30분에 최고치에 달하여 $0.85{\pm}0.14\;cm^2$이었고 금식 시 면적의 1.63배였다. 위 배출 시간은 $96.0{\pm}20.28$분이었다. 3) 모유수유아 및 분유수유아를 앙와위로 누인 경우의 위 전정부 면적은 금식 시와 수유 후 경과시간에 따른 차이가 없었으나 위 배출 시간은 모유수유아가 분유수유아 보다 유의하게 빨랐다(p<0.05). 2) 수유 후 자세에 따른 위 전정부 면적 및 위배출 시간의 비교; (1) 분유수유아를 앙와위로 누인 경우의 위 전정부 면적은 금식 시 $0.52{\pm}0.08\;cm^2$이었고 수유 후 즉시는 $0.68{\pm}0.10\;cm^2$이었으며 수유 후 30분에 최고치에 달하여 $0.85{\pm}0.14\;cm^2$이었고 금식 시 면적의 1.63배였다. 위 배출 시간은 $96.0{\pm}20.28$분이었다. (2) 분유수유아를 복와위로 누인 경우의 위 전정부 면적은 금식 시 $0.54{\pm}0.06\;cm^2$이었고 수유 후 즉시는 $0.63{\pm}0.13\;cm^2$이었으며 수유 후 30분에 최고치에 달하여 $0.81{\pm}0.12\;cm^2$이었고 금식 시의 1.50배였다. 위 배출 시간은 $85.0{\pm}22.43$분이었다. (3) 분유수유아에서 수유 후 자세를 앙와위 및 복와위로 취한 경우 위전정부 면적은 금식 시와 수유 후 경과에 따른 차이는 없었으나 수유 후 30분에는 앙와위로 누인 경우 $0.85{\pm}0.14\;cm^2$이었고 복와위로 누인 경우 $0.81{\pm}0.12\;cm^2$로 앙와위인 경우가 컸다(p<0.01). 위 배출 시간은 두 군간에 유의한 차이가 없었다(p>0.05). 결 론: 식도의 기능이 미숙하고 위의 연동운동이 덜 발달된 미숙아나 신생아는 역류와 구토의 빈도를 줄이고 경구 영양을 잘 진행해 나가기 위해서 위 배출 시간이 빠른 모유수유를 적극 권장하는 것이 좋을 것으로 사료된다. 수유 후 자세는 위 배출 시간에 영향을 주지는 않으나 역류나 구토가 일어났을 때 흡인의 가능성이 적어 안전하고, 편안히 잠잘 수 있으며 전통적으로 선호하는 자세를 취하면 적절할 것으로 사료된다.

• 대한치과보철학회지
• /
• 제46권2호
• /
• pp.148-156
• /
• 2008

자가부식 접착제는 사용하기 쉽고, 술식 민감성이 적은 장점이 있으나 특히 산도가 약한 자가부식 접착제의 법랑질에 대한 결합력은 논란이 되고 있다. 본 연구에서는 2단계 자가부식 접착제인 Clearfil SE Bond (Kuraray, Okayama, Japan)의 연마 법랑질에 대한 미세인장 결합강도를 측정하여 3단계 산부식수세 접착제인 Scotchbond Multi-Purpose (3M ESPE, St. Paul, MN, USA) 및 1단계 자가부식 접착제인 iBond (Heraeus Kulzer Gmbh, Hanau, Germany)의 결합강도와 비교하고자 하였고, 2단계 자가부식 접착제에 산부식 전처리를 시행하는 것이 법랑질에 대한 결합강도를 높일 수 있는지 알아 보고자 하였다. 실험군은 2단계 자가부식 접착제인 Clearfil SE Bond만 사용한 비산부식 군과 35% 인산 (Scotchbond Etchant, 3M ESPE)으로 산부식 후 Clearfil SE Bond를 사용한 산부식 군, 그리고 1단계 자가부식 접착제인 iBond를 사용한 군으로 나누었다. 대조군은 3단계 산부식수세 접착제인 Scotchbond Multi-Purpose를 사용한 군으로 정하였다. Bovine 전치의 순면을 십자가형으로 4등분하여 각 군으로 무작위로 배분하였다. 각 치아의 순면을 800-grit 실리콘 카바이드 지로 연마한 후 삭제된 법랑질면에 제조사의 설명서에 따라 각 군의 접착제를 적용하고 Light-Core (Bisco)로 적층 충전하였다. 시편은 $37i{\acute{E}}$, 증류수에 일주일 동안 보관한 후 low speed precicion diamond saw (TOPMENT Metsaw-LS, R&B, Daejeon, Korea)를 이용하여 약 $0.8{\times}0.8mm$ 단면이 되도록 시편을 절단하여 미세시편을 제작하였다. 일주일마다 증류수를 교환하면서 한 달, 세 달 동안 $37i{\acute{E}}$, 증류수에 미세시 편을 보관한 후 각각의 미세인장결합강도를 측정하였다. 미세인장결합강도 (MPa)는 파절 시에 가해진 힘 (N)을 접착면적 ($mm^2$)으로 나누어 계산하였다. 접착계면에서의 파절 양상은 실물현미경 (Microscope-B nocular, Nikon)을 이용하여 분류하였다. 미세인장결합강도에 대한 통계분석은 one-way ANOVA를 이용하여 유의수준 5%에서 검정하였고, 사후감정은 Least Significant Difference 방법을 이용하였다. 중합 후 1개월 뒤 측정된 각각의 접착제의 평균 미세인장결합강도는 유의수준 5%에서 모든 접착제 간에 유의한 차이가 없었다. 3개월 뒤 측정된 각각의 접착제의 평균 미세인장결합강도는 유의수준 5%에서 iBond 와 Clearfil SE Bond 비산부식 군과 Scotchbond Multi- Purpose 간에는 각각 유의한 차이가 없었다. 본 연구에서는 2단계 자가부식 접착제인 Clearfil SE Bond의 연마 법랑질에 대한 미세인장결합강도가 3단계 산부식수세 접착제인 Scotchbond Multi-Purpose 와 비교하여 유의한 차이가 없었으며 (P>0.05), 3개월 후의 결과에서 Clearfil SE Bond 비산부식 군의 미세인장결합강도가 Clearfil SE Bond 산부식 군보다 유의하게 낮았다 (P<0.05). 즉 35% 인산으로 산부식 전처리를 시행한결과 Clearfil SE Bond 의 법랑질에 대한 결합강도가 증가하였다.

• 한국산림과학회지
• /
• 제12권1호
• /
• pp.31-43
• /
• 1971

본연구(本硏究)는 소나무속(屬) Haploxylon 아속(亞屬)에 속(屬)하는 울릉도내(鬱陵島內) 섬잣나무의 자생종(自生種)과 본토내각지(本土內各地)에 도입산재(導入散在) 되어 있는 섬잣나무간(間)의 차이점(差異點)을 분별(分別)하는 동시(同時)에 형질조사(形質調査)를 통(通)하여 금후(今後) 계획적조림(計劃的造林)의 공헌(貢獻) 및 실용성(實用性) 여부(與否)를 관찰(觀察) 하였다. 1. 섬잣나무는 울릉도(鬱陵島)의 8개지역(個地域)에서 선발(選拔)된 자생종(自生種) 308개체(個體)와 본토내(本土內) 15개지역(個地域)에 도입산재(導入散在)되어 있는 168개체(個體) 부분(部分) 476개체(個體)와 비교수종(比較樹種)으로 잣나무 300개체(個體)에 대(對)하여 각형질(各形質)을 조사(調査)하였다(Table 1.). 2. 엽장(葉長)에 있어서 울릉도(鬱陵島) 섬잣나무는 본토내각지(本土內各地)의 섬잣나무 보다 21~35%의 더 큰치(値)를 보여 유의적(有意的)인 차이(差異)를 볼 수 있었다(Table 2.). 3. 엽(葉)의 해부학적(解剖學的) 물성(物性)에 있어서 수지도(樹脂道)의 위치(位置)는 본토내각지(本土內各地)의 섬잣나무가 대부분(大部分)이 외입(外入)인데 반(反)하여 울릉도(鬱陵島)의 섬잣나무는 전공시목(全供試木)의 50~70%가 수지도(樹脂道)가 전혀 없음을 관찰(觀察) 하였다. 따라서 수지도(樹脂道)의 엽당수(葉當數)에 있어서도 울릉도(鬱陵島) 섬잣나무는 0.4~0.9개(個)로서 본토내각지(本土內各地)의 섬잣나무의 2.0~2.7개(個)와는 현저(顯著)한 차이(差異)를 보였다 (Table 3, Fig. 2). 4. 구과(毬果)의 색(色)에 있어서 울릉도(鬱陵島) 섬잣나무는 황갈색(黃褐色)이고 수원(水原) 및 광양(光陽)의 섬잣나무는 적갈색(赤葛色)으로 분별(分別) 할수 있었으며 구과장(毬果長)과 인편수(鱗片數)에 있어서도 상호간(相互間)에 유의적(有意的)인 차이(差異)를 볼수 있었다. 특(特)히 인편(鱗片)의 열개정도(裂開程道)에서 울릉도(鬱陵島) 섬잣나무는 약간(若干) 열개(裂開)되나 광양(光陽) 및 수원(水原) 섬잣나무는 현저(顯著)하게 열개(裂開)되어 상호(相互) 분별(分別)할 수 있었다. (Table 4, Fig.3). 5. 종자(種子)의 색(色)에 있어서 울릉도(鬱陵島) 섬잣나무는 황갈색(黃褐色)이고 광양(光陽) 및 수원(水原) 섬잣나무는 적갈색(赤葛色)이었으며, 종자장(種子長)과 복(輻)에서도 울릉도(鬱陵島)의 섬잣나무가 보다 큰 유의차(有意差)를 보였다. 종익장(種翼長)은 울릉도(鬱陵島)<수원(水原)<광양(光陽)의 순(順)으로 광양(光陽)의 섬잣나무는 종자(種子) 보다 크게 발달(發達) 되었고, 울릉도(鬱陵島)의 섬잣나무는 종자(種子) 보다 작게 퇴화(退化) 되어 상호(相互) 현저(顯著)하게 분별(分別) 할수 있었다 (Table 5, Fig. 4). 6. 울릉도(鬱陵島)의 섬잣나무는 일본(日本)섬잣나무의 남방형(南方型)과 유사(類似)함을 알수 있었으나 다만 수지도(樹脂道)가 없는 엽(葉)의 출현(出現)이 50~70%에 달(達)함이 특이(特異)한 점(點)이다. 7. 본연구(本硏究)는 장차(將次) 계속구명(繼續究明)되어야 할것으로 사료(思料)되나 본시험(本試驗) 결과(結果)의 제특성(諸特性)으로 보아 울릉도(鬱陵島)섬 잣나무 자생종(自生種)은 울릉도내(鬱陵島內)의 동일집단(同一集團) 또는 표고별(標高別)에 따라 형질(形質)의 차이(差異)가 없었으나 본토내각지(本土內各地)에 도입산재(導入散在) 되어 있는 섬잣나무와는 현저(顯著)한 차이(差異)가 있어 상호(相互) 현저(顯著)하게 분별(分別) 할수 있었음을 관찰(觀察) 하였으며, 관실수목(觀實樹木)으로는 물론(勿論) 실용성(實用性)있는 경제수종(經濟樹種) 임으로 금후(今後) 계획적조림(計劃的造林)에도 공헌(貢獻)할수 있는 유용수종(有用樹種)으로 장려(奬勵)할 가치(價値)가 있음을 알수 있었다.

• 헤리티지:역사와 과학
• /
• 제39권
• /
• pp.95-130
• /
• 2006

근대 초부터 일제강점기까지 세키노 타다시(關野貞)를 비롯한 일본인 관학파 연구자들은 신라고분을 비롯한 한국의 문화유적 전반에 대한 조사연구와 자료수집활동을 했다. 이들은 초기에는 메이지정부의 지원을 받았고 한국이 식민지화된 이후에는 조선총독부와 유관기관으로부터 재정 지원을 받으면서 고고, 미술, 건축, 인류학, 민속학 등 전 분야에 걸친 조사를 하였다. 이들이 신라고분을 비롯한 한국의 문화유산을 조사한 목적은 한국에 대한 일본의 식민지배를 정당화하기 위한 이론적 근거와 필요한 자료를 찾기 위한 것이었으므로, 지역적으로 편중되고 왜곡된 시각이 나타나기도 한다. 1886년부터 한국의 고분과 출토유물에 대한 관심을 가진 일본인 연구자들에 의한 방한 조사가 계속 끊임없이 이루어졌다. 1904년 세키노가 한국에서 조사한 건축조사 보고서인 "한국건축조사보고(韓國建築調査報告)"에는 오릉을 비롯한 여러 고분에 대한 내용이 간단하게 소개되었고, 1906년에는 이마니시 류(今西龍)가 최초로 소금강산에 위치한 '북산고분(北山古墳)'과 황남동 남총(南塚)에 대한 발굴조시를 한 후, 적석목곽분(積石木樹墳)과 횡혈식석실분(橫穴式石室墳)의 구조에 대한 초보적인 인식이 이루어졌다. 1909년 건축학을 전공한 야츠이 세이이치(谷井第一)는 서악동 석침총(石枕塚) 발굴조사에서 작성한 석실의 평면도와 단면도는 한국에서 이루어진 발굴조사에서 최초로 제작된 유구실측도면으로 수치가 표현된 점에서 이전의 스케치된 그림과는 뚜렷하게 구분된다. 또한 이후 발굴조사에서는 이러한 유구 실측도면의 작성은 계속 이어진다. 이마니시와 야쯔이는 신라고분의 입지적 특징, 분구의 형태와 규모, 출토유물 등에 대한 조사 결과에 근거하여 적석목곽분과 횡혈식석실분은 서로 연대적으로 차이가 있음을 밝혔다. 조선총독부는 1916년에 "고적 및 유물보존규칙"과 "고적조사위원회규정"을 시행하고 고적조사위원회와 박물관협의회를 설치했다. 박물관이 활동하게 되면서 고분에서 출토된 유물들을 전시하고 유적을 조사하는 사업들은 모두 조선총독부의 허가를 얻어야 됐다. 1921년에는 금관총(金冠塚)이, 1927년에는 서봉총(瑞鳳塚)이 각각 발굴조사되면서 경주의 대형 적석목곽분은 화려한 출토유물로 주목을 받게 되지만, 전국 각지에 대한 조사가 이루어지면서 여러 고분들에 대한 보고서 발간은 이루어지지 못했다. 최근 몇몇 연구자들의 노력에 의해서 미발간 보고서가 간행되었지만, 서봉총과 같이 중요한 고분들에 대한 보고서가 아직 출판되지 못한 점은 당시의 한계로 볼 수 있다. 1920년대 후반에는 노모리 켄(野守健)이 지적도를 기초로 제작한 경주고분 분포도는 현재 통용되고 있는 155기의 고분의 규모와 위치를 명기한 자료로 시내에 소재한 여러 고분의 전체 모습을 확인시켜준 점에서 그 의미가 크다. 1930년대부터 아리미츠 쿄이찌(有光敎一)와 사이토 타다시(齋藤忠)는 다수의 적석목곽분과 횡혈식석실분에 대한 발굴조사를 통해서 한 묘제에 여러 가지 형식의 분묘가 존재하고 있음을 확인하였고, 특히 복잡하게 중복된 모습으로 노출된 적석목곽분에 대한 발굴조사경험은 이전에 이루어진 발굴조사와 보고서간행 등에 있어서 발전된 모습을 보여준다. 이번에 지난 근대~일제강점기에 발굴조사된 신라고분에 대한 발굴조사 내용을 살펴본 결과, 이때 조사된 여러 유적들에 대한 조사내용을 재검증하는 작업이 필요하며 이는 한국고고학사를 정리하는데 있어서 중요한 사실임을 재확인할 수 있다.

• 대한방사선치료학회지
• /
• 제34권
• /
• pp.73-82
• /
• 2022

목 적: 본 연구는 난소전위술을 시행한 가임기 여성의 자궁경부암 방사선치료 시 Halcyon^TM Fast kV CBCT를 사용하였을 때 난소에 미치는 흡수선량과 영상의 품질을 분석하여 유용성을 평가하고자 한다. 대상 및 방법: 인체모형 팬텀(Alderson Rando Phantom, USA)의 전산화단층촬영 영상에 측정에 필요한 자궁경부와 난소의 윤곽묘사(contouring)를 하였고, 해당 장기 단면에 광자극발광선량계(Optically Stimulated Luminescence Dosimeter, OSLD, InLight system, Landauer, USA)를 각각 3개씩 부착하였다. Truebeam^TM의 Pelvis mode(이하 TP)와 Halcyon^TM의 Pelvis mode(이하 HP) 그리고 Halcyon^TM의 Pelvis Fast mode(이하 HPF)에서 자궁경부와 난소에 들어가는 흡수선량을 측정하기 위해 촬영 범위를 17.5 cm와 12.5 cm로 촬영 범위를 축소한 영상을 촬영하였다. 총 10회의 누적선량을 합산하였고, 자궁경부암 치료 횟수인 23회의 값으로 치환하여 비교하였다. 또한 영상 장비 간의 CBCT 영상 품질을 비교하기 위해 Catphan 504 팬텀(The Phantom Laboratory, USA)을 이용하여 균일도(Uniformity), 저 대조도 가시(Low contrast visibility, LCV), 공간분해능(Spatial resolution), 기하학적 왜곡(Geometric Distortion)을 비교 분석하였다. 각각 3회 반복 측정하여 Doselab (Versions: 6.8, Mobius Medical Systems) 프로그램으로 분석 후 평균값을 구하였다. 결 과: CBCT에 의한 흡수선량을 OSLD로 측정한 결과 동일한 조건일 시 TP와 HP는 유의미한 결과를 얻지 못하였다. 가장 큰 감소 값을 보인 모드는 TP 대비 HPF였다. HPF는 17.5 cm의 촬영 범위에서 흡수선량이 TP보다 자궁경부가 약 39.82%, 난소에서 약 19.8% 감소 하였고, 12.5 cm 으로 촬영 범위를 축소할 경우 자궁경부는 34.2%, 난소 50.5%로 감소 시킬 수 있었다. 또한 위 실험에서 사용된 영상의 품질을 평가한 결과 Geometric Distortion 1mm 이내(SBRT 기준), Uniformity HU, LCV 2.0% 이내 Spatial Resolution 3 lp/mm 이상으로 장비사의 기준치를 준수하였다. 결 론: 본 실혐 결과에 따라 난소전위술을 시행한 가임기 여성의 방사선치료 시 CBCT로 인한 피폭선량을 낮추기 위해서는 Truebeam^TM 보다 다양한 조건을 선택 할 수 있는 Halcyon^TM이 유용할 것으로 평가 되며, 특히 낮은 mAs로도 영상의 품질을 유지하는 Halcyon^TM의 Fast kV CBCT를 권장한다. 다만 다른 치료 장비에서도 난소전위를 시행한 환자는 촬영 범위를 조정하는 것으로 저선량에 대한 추가적인 피폭 감소시킬 수 있을 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Journal of the Korean Wood Science and Technology
• /
• 제6권2호
• /
• pp.3-19
• /
• 1978

우리나라에서 아직 이용개발(利用開發)되고 있지 아니한 구상나무, 구실잣밤나무, 후박나무, 때죽나무 및 북가시나무등(等) 5수종(樹種)에 대(對)한 해부학적성질(解剖學的性質), 물리적성질(物理的性質), 기계적성질(機械的性質), 접착성능(接着性能), 목리(木理) 무늬정미성(精緻性), 가공성(加工性), 건조특성(乾燥特性), 프로링제작성(製作性), 목재(木材)의 조성분(組成分), 펄프화특성(化特性) 및 박피성등(剝皮性等)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 원료목재(原料木材)의 형질(形質)은 구상나무가 통직(通直)하나 옹이가 과다(過多)하였고, 잣밤나무와 때쭉나무는 굽음이 심(甚)하였다. 2. 섬유장(纖維長)은 구상나무가 2.97mm로 가장 컷으며, 때죽나무가 1.49mm였으며, 기타(其他) 수종(樹種)도 1.07~1.19mm에 속하였다. 섬유폭(纖維幅)은 구상나무가 39.3${\mu}$으로 가장 컸고, 때죽나무가 18.4${\mu}$으로 최소(最小)였으며 기타(其他) 수종(樹種)들은 23~29${\mu}$의 범위(範圍)에 속하나 대체(大體)로 타활엽수(他闊葉樹)에 비(比)해 섬유폭(纖維幅)이 컸다. 3. 북가시나무의 전건비중(全乾比重)은 0.74${\pm}$0.03으로서 한국산(韓國産) 참나무류(類)의 비중(比重)과 유사(類似)하였으며 구상나무는 0.34${\pm}$0.02로 최소(最小)였으며 기타(其他) 수종(樹種)은 0.47~0.51의 범위(範圍)에 있었다. 4. 흡수량(吸水量)은 대체(大體)로 비중(比重)에 역비례(逆比例)하여 감소(減少)되나 흡습량(吸濕量)은 비중(比重) 증가(增加)에 따라서 증가(增加)하는 경향(傾向)을 나타냈다. 또한 횡단면(橫斷面)의 흡수량(吸水量)은 경단면(經斷面) 접선단면(接線斷面)의 그것들에 비(比)해 2배(倍) 이상(以上)에 달(達)하나, 후박나무는 1.7배(倍)였으며, 경단면(經斷面)과 접선단면(接線斷面)의 흡수량(吸水量)은 수종(樹種)에 따라서 달랐다. 5. 전건수축율(全乾收縮率)은 접선방향(接線方向)에서 5.36~10.24%, 반경방향(半徑方向)에서 2.83~6.13%에 범위(範圍)에 속하며 구상나무가 가장 적고, 북가시나무가 가장 컸다. 수축율(收縮率)은 비중(比重)이 큰 수종(樹種)일수록 컸다. 6. 공시수종(供試樹種)의 제강도(諸强度)는 북가시나무의 경우 강원도산(江原道産) 신갈나무와 유사(類似)하였으며, 구실잣밤나무, 후박나무 구상나무는 비중(比重)이 유사(類似)한 한국산수종(韓國産樹種)의 재질(材質)들과 유사(類似)하였으나, 때쭉나무는 일반적(一般的)으로 비중(比重)에 비(比)해 높은 강도치(强度値)를 기록(記錄)하였다. 7. 요소수지(尿素樹脂) 및 석탄산수지(石炭酸樹脂)에 대(對)한 접착(接着)은 후박나무와 구실잣밤나무가 최대치(最大値)를 기록(記錄)하였으나, 비중(比重)이 큰 북가시나무와 비중(比重)이 작은 구상나무는 그렇지 못하였다. 8. 목리(木理)와 무늬정치성(精緻性)은 후박나무는 파상(波狀)으로 굴곡(屈曲)되어 목재공예적(木材工藝的)으로 진용(珍用)될 수 있으며 기타(其他) 수종(樹種)들은 건축(建築) 및 가구용재(家具用材)로서 적합(適合)한 무늬였다. 6. 가공성(加工性)은 북가시나무를 제외(除外)하곤 기타 수종(樹種)은 양호(良好)할 것으로 판단(判斷)된다. 10. 비중(比重)이 큰 수종(樹種)일수록 건조(乾燥)의 곤란성(困難性)을 노정(露呈)하였으나, 후박나무는 비중(比重)에 비(比)해 건조(乾燥)가 용이(容易)치 않고, 심(甚)한 트위스팅 및 커핑 등(等) 건조결함(乾燥缺陷)을 발생(發生)하였다. 11. 구상나무를 제외(除外)한 모든 공시수종(供試樹種)은 플로링제작(製作)에 적합(適合)한 것으로 판단(判斷)된다. 12. 화학적(化學的) 조성분(組成分)은 5수종(樹種) 공(共)히 펜토산 함량(含量)이 많았고 북가시나무는 추출물(抽出物)의 함량(含量)이 최대(最大)였다. 13. 크라프트 펄프화(化)는 5수종(樹種) 공(共)히 경제수율(經濟收率)인 45% 이상(以上)을 기록(記錄)하였다. 14. 박피(剝皮)는 구상나무와 후박나무가 용이(容易)하였으며, 5수종(樹種) 모두 자비(煮沸)한 후(後) 박피(剝皮)한 것이 가장 능율적(能率的)이었다.

• 한국산림과학회지
• /
• 제42권1호
• /
• pp.1-38
• /
• 1979

Ilex속(屬) 수목(樹木)의 변이(變異)와 증식법(增殖法)을 연구(硏究)하기 위(爲)하여 호랑가시 나무 10개(個) 집단(集團), 꽝꽝나무 7개(個) 집단(集團), 먼나무 5개(個) 집단(集團), 감탕나무 3개(個) 집단(集團), 청대팻집나무 2개체(個體), 대팻집나무 1개체(個體), 낙상홍 20개체(個體)로 총(總) 28(個) 집단(集團), 170개체(個體)를 조사(調査)하였다. 각(各) 개체(個體)를 대상(對象)으로 하여 외형적(外形的) 특성(特性), 엽(葉)의 형태적(形態的) 특성(特性) 및 열매의 형태적(形態的) 특성(特性)에 대(對)한 변이(變異)를 수종별(樹種別)로 조사분석(調査分析)하였다. 집단(集團)으로 자생(自生)하고 있는 호랑가시나무 6개(個) 집단(集團)과 꽝꽝나무 4개(個) 집단(集團)은 Transect조사(調査)를 하였다. 증식법(增殖法)으로는 파종(播種)과 삽목(揷木)을 하였다. 그 결과(結果)는 다음과 같이 요약(要約)된다. 1. 호랑가시나무는 일반적(一般的)으로 10년생(年生) 이상(以上)의 성숙목(成熟木)이 되면 수고(樹高) 1m, 근원경(根元徑)이 2cm이상(以上)이 되는 것으로 추정(推定)된다. 잎과 열매의 형태적(形態的) 특성(特性) 조사(調査)에서 엽장(葉長), 엽폭(葉幅), 엽병장(葉柄長), 거치수(鋸齒數) 및 과장(果長)은 집단간(集團間), 집단내(集團內) 개체간(個體間)에 유의(有意)한 차이(差異)를 보였다. 과폭(果幅), 과병장(果柄長)은 집단간(集團間) 차이(差異)에는 유의성(有意性)이 인정(認定)되지 않았고, 집단내(集團內) 개체간(個體間) 차이(差異)는 유의성(有意性)이 인정(認定)되었다. 2. 꽝꽝나무의 잎과 열매의 특성(特性) 조사(調査)에서 엽장(葉長), 엽폭(葉幅), 엽병장(葉柄長), 거치수(鋸齒數), 과병장(果柄長)은 집단간(集團間), 집단내(集團內) 개체간(個體間)에 통계학적(統計學的)으로 유의(有意)한 차이(差異)를 보였다. 과장(果長), 과폭(果幅)은 집단간(集團間)의 차이(差異)에는 유의성(有意性)이 없었으나, 집단내(集團內) 개체간(個體間)에는 유의(有意)한 차이(差異)를 보였다. 7개(個) 집단중(集團中) 엽장(葉長)과 엽폭(葉幅)에서 5개(個) 집단(集團), 5개(個) 집단중(集團中) 과장(果長)과 과폭(果幅)에서 4개(個) 집단(集團)이 기간(其間)의 정(正)의 상관(相關)을 나타냈다. 3. 먼나무의 잎과 열매의 특성(特性) 조사(調査)에서 엽장(葉長)만이 집단간(集團間), 집단내(集團內) 개체간(個體間)의 차이(差異)에서 유의성(有意性)이 있었고, 엽폭(葉幅), 엽병장(葉柄長), 과장(果長), 과폭(果幅), 과병장(果柄長)은 집단간(集團間)에는 차이(差異)가 없었으나, 집단내(集團內) 개체간(個體間)에는 유의(有意)한 차이(差異)를 보였다. 5개(個) 집단중(集團中) 엽장(葉長)과 엽폭(葉幅)에서 2개(個) 집단(集團)이 기간(其間)의 정(正)의 상관(相關)이 있었고, 과장(果長)과 과폭(果幅)에서는 4개집단(個集團) 모두 상관(相關)이 없는 것으로 나타났다. 4. 감탕나무 잎의 형태적(形態的) 특성(特性) 조사(調査)에서 엽장(葉長), 엽폭(葉幅), 엽병장(葉柄長)이 집단간(集團間)에는 차이(差異)가 없었으나, 집단내(集團內) 개체간(個體間)에는 유의(有意)한 차이(差異)를 보였다. 엽장(葉長)과 엽폭(葉幅)에서 3개(個) 집단중(集團中) 1개(個) 집단(集團)만이 기간(其間)의 정(正)의 상관(相關)을 보였다. 5. 청대팻집나무 잎의 특성(特性) 조사(調査)에서 개체(個體) 2가 개체(個體) 1보다 엽장(葉長), 엽폭(葉幅)의 측정치(測定値)가 컸고, 엽병장(葉柄長)은 직았다. 6. 호랑가시나무의 기공밀도(氣孔密度) 조사(調査)에서 집단별(集團別) 평균기공밀도(平均氣孔密度)와 한량지수(寒量指數)에는 높은 상관(相關)을 가진다. 내동성(耐冬性)이 강(强)한 집단(集團)일수록 기공밀도(氣孔密度)는 적어지는 것으로 나타났다. 그리고 엽신(葉身)의 하부(下部), 상부(上部), 중부순(中部順)으로 기공밀도(氣孔密度) 경향(傾向)이 있었으나 통계분석(統計分析) 결과(結果)로써는 부위간(部立間)의 차이(差異)가 증가(增加)되는에서 유의성(有意性)이 인정(認定)되지 않았다. 꽝꽝나무는 기공밀도(氣孔密度)와 한량지수간(寒量指數間)에서 통계학적(統計學的)으로 상관(相關)이 인정(認定)되지 않는 것으로 나타났다. 엽신(葉身)의 부위간(部位間)에는 하부(下部), 중부(中部), 상부(上部)의 순(順)으로 기공밀도(氣孔密度)가 높아지는 것을 통계학적(統計學的)으로 인정(認定)할 수 있었다. 7. Transect조사(調査) 결과(結果) 호랑가시나무는 일반적(一般的)으로 경사(傾斜)가 완만(緩慢)하고 해발고(海拔高)가 낮은 바닷가의 사질토양(砂質土壤)에서 잘 자생(自生)하는 것으로 나타났다. 호랑가시나무를 제외(除外)한 Transect 구내(區內)의 구성종(構成種)으로는 해송(海松)을 주(主)로 하고 환삼덩굴, 산딸기, 칡, 들장미 등(等)이 나타났다. 자연집단(自然集團)에 있어서 호랑가시나무의 성비(性比)(자(雌):웅(雄))는 약(約) 1:2로 웅수(雄樹)가 더 많았다. 꽝꽝나무는 일반적(一般的)로 부식량(腐植量)이 많고 습(濕)한 소교목지대(小喬木地帶)에서 잘 자생(自生)하며, 황칠나무, 청미래덩굴, 삼나무, 단풍나무, 솔비나무, 굴거리나무 등(等)과 혼생(混生)하는 것으로 나타났다. 자연집단(自然集團)에서 꽝꽝나무의 성비(性比)는 약(約) 1:1로 나타났다. 8. 호랑가시나무의 경우(境遇) 삽수(揷穗)를 일년생(一年生) 지(枝)에서 채취(採取)하여 10cm 깊이로 조제(調製)하고, IBA로 처리(處理)한 뒤 흙떡꽂이를 실시(實施)한 삽목(揷木) 결과(結果) 좋은 근계(根系)와 높은 발근율(發根率)을 얻을 수 있었다.