• Journal of Multimedia Information System
• /
• v.9 no.3
• /
• pp.233-244
• /
• 2022

A MATLAB program was developed to calculate the half-wavelength of a sine-curve baseband signal with white noise by using an autocorrelation function, a SG filter, and zero-crossing detection. The frequency of the input signal can be estimated from 1) the first zero-crossing (corresponding to ¼λ) and 2) the R value (the Y axis of the correlogram) at the center of the segment. Thereby, the frequency information of the preceding segment can be obtained. If the segment size were optimized, and a portion with a large zero-crossing dynamic range were obtained, the frequency discrimination ability would improve. Furthermore, if the values of the correlogram for each frequency prepared on the CPU side were prepared in a table, the volume of calculations can be reduced by 98%. As background, period detection by autocorrelation coefficients requires an integer multiple of 1/2λ (when using a sine wave as the object of the autocorrelation function), otherwise the correlogram drawn by R value will not exhibit orthogonality. Therefore, it has not been used in bio-telemetry where the frequencies move around.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.926-931
• /
• 1998

In this paper, a code sequence generation method of the Suehiro sequence is suggested. In this method, a code sequence is generated only with integer sums and modular techniques. the auto-correlation and cross-correlation characteristics of the sequence generated by the method are investigated. The sequence generated by the suggested method has the orthogonality and satisfies the mathematical lower bound of the cross-correlation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1420-1422
• /
• 2016

In order to guarantee the multiuser transmission performance of a chirp spread spectrum system, the cross-correlation coefficient (CCC) among multiple users should be carefully considered. In this paper, we propose a chirp rate allocation scheme for reducing the multiple access interference based on the cross-correlation coefficient. The simulation results show that the proposed scheme can improve the multiple access interference performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2004

An OFDM system using cross-handed circular Polarization(XCP-OFDM) is newly proposed in his paper. The proposed XCP-OFDM system divides the subchannels into a right-handed circular polarization(RHP channel and a left-handed circular polarization(LHCP) channel that alternate each other. Therefore, the overlaps between subcarriers in XCP-OFDM system can be reduced to a great extend compared to the conventional OFDM system. By this reason, it can improve the orthogonality and reduce the inter-channel interference due to frequency offset. In this paper, it can be seen that the proposed XCP-OFDM system shows robust against frequency offset.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.1
• /
• pp.19-29
• /
• 2013

This paper deals with the study of buckling, vibration, and parametric instability characteristics in a damaged cross-ply and angle-ply laminated plate like beam under in-plane harmonic loading, using the finite element approach. Damage is modelled using an anisotropic damage formulation, based on the concept of reduction in stiffness. The effect of damage on free vibration and buckling characteristics of a thin plate like beam has been studied. It has been observed that damage shows a strong orthogonality and in general deteriorates the static and dynamic characteristics. For the harmonic type of loading, analysis was carried out on a thin plate like beam by solving the governing differential equation which is of Mathieu-Hill type, using the method of multiple scales (MMS). The effects of damage and its location on dynamic stability characteristics have been presented. The results indicate that, compared to the undamaged plate like beam, heavily damaged beams show steeper deviations in simple and combination resonance characteristics.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.973-976
• /
• 2000

This paper proposes a new polarization diversity scheme for OPFDM (Orthogonal Polarization and Frequency Division Multiplexing). OPFDM is an extension of OFDM (Orthogonal Frequency Division Multiplexing) in conjunction with polarization multiplexing in order to ensure the orthogonality amongst subcarriers. Since OPFDM uses two orthogonally polarized channels, it can easily employ the polarization diversity. In order to get the diversity gain effectively in a frequency selective fading channel, the proposed scheme combines the signals in subcarrier-by-subcarrier basis. The computer simulation results confirm that the proposed scheme is superior to conventional one in the two orthogonally polarized two-ray Rayleigh fading channels with cross-talk between the two channels.

• Wind and Structures
• /
• v.3 no.4
• /
• pp.221-241
• /
• 2000

Structural dynamics usually applies modal transformation rules aimed at de-coupling and/or minimizing the equations of motion. Proper orthogonal decomposition provides mathematical and conceptual tools to define suitable transformed spaces where a multi-variate and/or multi-dimensional random process is represented as a linear combination of one-variate and one-dimensional uncorrelated processes. Double modal transformation is the joint application of modal analysis and proper orthogonal decomposition applied to the loading process. By adopting this method the structural response is expressed as a double series expansion in which structural and loading mode contributions are superimposed. The simultaneous use of the structural modal truncation, the loading modal truncation and the cross-modal orthogonality property leads to efficient solutions that take into account only a few structural and loading modes. In addition the physical mechanisms of the dynamic response are clarified and interpreted.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.181-190
• /
• 2014

This paper reports a cognitive radio network architecture based on overloaded multicarrier direct sequence code division multiple access (O-MC-DS-CDMA). The O-MC-DSCDMA technique combines CDMA with a multicarrier modulation technique to overcome the channel fading effects. In this technique, secondary users are enabled to share the available bandwidth with the existing primary users. Two sets of orthogonal Gold codes are used to support the primary and secondary users simultaneously. The orthogonality between the spreading codes is lost due to the non-zero cross correlation between the codes and the timing synchronization error in the uplink transmission, which causes interference between primary and secondary users. This paper proposes two modified hybrid parallel/successive interference cancellation techniques for primary and secondary user base station receivers with multiple antennas to suppress the interference among users. Interference among the same group of users is cancelled by parallel interference cancellation and the interference among groups is cancelled using successive interference cancellation. The simulation results confirmed that the proposed modified interference cancellation techniques show better BER performance over conventional interference cancellation techniques.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.337-347
• /
• 2009

Generally, finite element models used in structural analysis have some uncertainties of the geometric dimensions, applied loads and boundary conditions, as well as in material properties due to the manufacturability of aluminum intensive body. Therefore, it is very important to refine or update a finite element model by correlating it with dynamic and static tests. The structural optimization problems of automotive body are considered for mechanical structures with initial stiffness due to preloading and in operation condition or manufacturing. As the mean compliance and deflection under preloading are chosen as the objective function and constraints, their sensitivities must be derived. The optimization problem is iteratively solved by a sequential convex approximation method in the commercial software. The design variables are corrected by the strain energy scale factor in the element levels. This paper presents an updated method based on the sensitivities of structural responses and the residual error vectors between experimental and simulation models.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.404-411
• /
• 2018

This paper proposes a dolphin whistle mimicking underwater communication method using FSK (Frequency Shift Keying) and method to improve BER (Bit Error Rate) performance by using multipath gain combining. The proposed method divides whistle sound into short time intervals and transmits FSK modulated signal that ensures orthogonality of the symbol. Multipath gain can be obtained by using characteristic of mimicked signal frequency that varies with time. To demonstrate the performance of the proposed method, computer simulations and lake experiments were conducted. Computer simulation results show that an additional multipath gain is obtained by multipath. From lake experiments, when symbol length is 20 msec and modulation band is 900 Hz, the proposed FSK method with multipath combining gain obtains BER of 0.002, which is better than CSS (Chirp Spread Spectrum) with BER of 0.185. he proposed based on FSK method has higher imitation degree than the CSS method by analyzing mean cross-correlation value in the time - frequency domain of the imitated signal and actual whistle signal.