• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.3
• /
• pp.211-218
• /
• 2015

The analysis of remote sensing data depends on sensor specifications that provide accurate and consistent measurements. However, it is not easy to establish confidence and consistency in data that are analyzed by different sensors using various radiometric scales. For this reason, the cross-calibration method is used to calibrate remote sensing data with reference image data. In this study, we used an airborne hyperspectral image in order to calibrate a multispectral image. We presented an automatic cross-calibration method to calibrate a multispectral image using hyperspectral data and spectral mixture analysis. The spectral characteristics of the multispectral image were adjusted by linear regression analysis. Optimal endmember sets between two images were estimated by spectral mixture analysis for the linear regression analysis, and bands of hyperspectral image were aggregated based on the spectral response function of the two images. The results were evaluated by comparing the Root Mean Square Error (RMSE), the Spectral Angle Mapper (SAM), and average percentage differences. The results of this study showed that the proposed method corrected the spectral information in the multispectral data by using hyperspectral data, and its performance was similar to the manual cross-calibration. The proposed method demonstrated the possibility of automatic cross-calibration based on spectral mixture analysis.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.11-22
• /
• 2019

The objective of this study was to improve the cross-sectional area and height estimation method using stream width. Stream water levels should be calculated together to simulate inundation of agricultural land. However, cross-sectional survey data of small rural rivers are insufficient. The previous study has developed regression equations between the width and the cross-sectional area and between the width and the height of stream cross-section, but can not be applied to a wide range of stream widths. In this study, cross-sectional survey data of 6 streams (Doowol, Chungmi, Jiseok, Gam, Wonpyeong, and Bokha stream) were collected and divided into upstream, midstream and downstream considering the locations of cross-sections. The regression equations were estimated using the complete data. $R^2$ between the stream width and cross-sectional area was 0.96, and $R^2$ between width and height was 0.81. The regression equations were also estimated using divided data for upstream, midstream and downstream considering the locations of cross-sections. The range of $R^2$ between the stream width and cross-sectional area was 0.86 - 0.91, and the range of $R^2$ between width and height was 0.79 ? 0.92. As a result of estimating the cross-sections of 6 rivers using the regression equations, the regression equations considering the locations of cross-sections showed better performance both in the cross-sectional area and height estimation than the regression equations estimated using the complete data. Hydrologic Engineering Center - River Analysis System (HEC-RAS) was used to simulate the flood stage analysis of the estimated and the measured cross-sections for 50-year, 100-year, and 200-year frequency floods. As a result of flood stage analysis, the regression equations considering the locations of cross-sections also showed better performance than the regression equations estimated using the complete data. Future research would be needed to consider the factors affecting the cross-sectional shape such as river slope and average flow velocity. This study can be useful for inundation simulation of agricultural land adjacent to an unmeasured stream.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.675-682
• /
• 2002

In this study, we develop the statistical analysis program for genetic analysis of diallel crosses data by SAS/MACRO, SAS/IML. Genetic analysis is to estimate of genetics parameters and heredity with reciprocal cross and without reciprocal cross. Statistical analysis program solve the problem of the difficulties on the data analysis in field denetics and breeding Therefore the user whoever want to analysis of data on genetics and breeding easily conduct the work saving time and suffering.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.103-110
• /
• 2000

Flow analysis of profile extrusion is essential for design and production of a profile extrusion die. Velocity, pressure, and temperature distribution in an extrusion die are predicted and compared with the experimental results. A two dimensional numerical method is proposed for three dimensional analysis of the flow field within the profile extrusion die by applying a modified cross-sectional numerical method. Since the cross-sectional shape of the die is varied gradually, it is assumed that the pressure is constant within a cross-sectional plane that is perpendicular to the flow direction. With this assumption, the velocity component in the cross-sectional direction is neglected. The exact cross-sectional shape at any position is calculated based on the geometry of standard cross-sections. The momentum and energy equations are solved with proper boundary conditions at a cross-section and then the same calculation is carried out for the next cross-section using the current calculated values. An L-shaped profile extrusion die is produced and employed for experimental investigation using a commercially available polypropylene. Numerical prediction for the varying cross-sectional shape provides better results than the previous studies and is in good agreement with the experimental results.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.11-18
• /
• 2016

The objective of this study was to develop the simple method to estimate ungauged river section for flood stage analysis. Damage prediction should be prioritized using hydrological modeling to reduce flood risk. Mostly, the geographical data using hydrological modeling depends on national river cross-section survey. However because of the lack of measured data, it is difficult to apply to many local streams or small watersheds. For this reason, this study suggest the method to estimate unguaged river cross-section. Simple regression equations were derived and used to estimate river cross-section by analyzing the correlation between the river cross-sectional characteristics (width, height and area). The estimated cross-sections were used to simulate flood level by HEC-RAS (Hydrologic Engineering Center's River Analysis System). The applicability of this method was verified by comparing simulated flood level between measured and estimated cross-section. The water surface elevation of the flood stage analysis was 6.56-7.24 m, 5.33-5.95 m and 6.12-6.75 m for measured cross section, for estimated cross section and for estimated cross section based on DEM elevation, respectively. Further study should consider other factors for more accurate flood stage analysis. This study might be used one of the guidelines to estimate ungauged river section for flood stage analysis.

• Korea Trade Review
• /
• v.46 no.6
• /
• pp.211-224
• /
• 2021

Based on the perspective of international trade and cross-border e-commerce development, this paper explores the impact of cross-border e-commerce on international trade. This paper first describes the current situation of China's cross-border e-commerce and proposes a theoretical model of the influence of China's cross-border e-commerce on its international trade based on the research and summary of a large number of relevant documents. This paper establishes an extended gravity model based on the proposed theoretical model. Relevant data of 13 trading partner countries were used as sample data, and OLS regression analysis and heterogeneity analysis were conducted on gravity model by using Eviews 11.0. Then, in order to study the influence of each variable on import and export trade volume, import and export trade volume were respectively taken as explained variables and further studied by OLS regression analysis. To test the robustness of the model, the empirical analysis results show that cross-border e-commerce does promote the volume of China's international trade.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1428-1434
• /
• 2004

This paper presents the mean streamline analysis using the empirical loss correlations for performance prediction of cross-flow fans. Comparison of overall performance predictions with test data of a cross-flow fan system with a simplified vortex wall scroll casing and with the published experimental characteristics for a cross-flow fan has been carried out to demonstrate the accuracy of the proposed method. Predicted performance curves by the present mean streamline analysis agree well with experimental data for two different cross-flow fans over the normal operating conditions. The prediction method presented herein can be used efficiently as a tool for the preliminary design and performance analysis of general-purpose cross-flow fans.

• International Journal of Contents
• /
• v.8 no.4
• /
• pp.50-55
• /
• 2012

This study compared cross-national Twitter use between Korea and Japan. The main exploratory variables were a) cultural traits and b) disclosure of geographic information. Twitter use was measured by the degree of reciprocity and the numbers of Tweets, followings, and followers. Data were collected using API-based software and analyzed with independent samples t-tests. Content analysis was conducted to validate the findings. The results indicate that Korean and Japanese users employ their own communication strategies reflecting their cultural orientation.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.421-426
• /
• 2005

Scattering center extraction schemes for radar cross section reduction of large complex targets, like warships, was developed, which are an 1-D radar image method(range profile), and a direct analysis based on an object precision method. The analysis result of partial dihedral model shows that the presented direct analysis method is more efficient than the 1-D radar image method for scattering center extraction of interested targets, in terms of radar cross section reduction design, not signal processing. In order to verify the accuracy of the direct analysis method, a scattering center analysis of an naval weapon system was carried out, and the result was coincident with that of another well-known RCS analysis program. Finally, an analysis result of RCS and its scattering center of an 120m class warship-like model presented that the direct analysis method can be an efficient and powerful tools for radar cross section reduction of large complex targets.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.203-216
• /
• 2022

In the recent business environment, purchase patterns are changing around the influence of COVID-19 and the online market. This study analyzed cluster and correlation analysis based on purchase and product information. The cluster analysis of new methods was attempted by creating customer, product, and cross-bonding clusters. The cross-bonding cluster analysis was performed based on the results of each cluster analysis. As a result of the correlation analysis, it was analyzed that more association rules were derived from a cross-bonding cluster, and the overlap rate was less. The cross-bonding cluster was found to be highly efficient. The cross-bonding cluster is the most suitable model for recommending products according to customer needs. The cross-bonding cluster model can save time and provide useful information to consumers. It is expected to bring positive effects such as increasing sales for the company.