• Smart Structures and Systems
• /
• 제32권2호
• /
• pp.101-109
• /
• 2023

In order to improve the measurement accuracy of the 6-dimensional accelerometer, the cross coupling compensation method of the accelerometer needs to be studied. In this paper, the non-linear error caused by cross coupling of piezoelectric six-dimensional accelerometer is compensated online. The cross coupling filter is obtained by analyzing the cross coupling principle of a piezoelectric six-dimensional accelerometer. Linear and non-linear fitting methods are designed. A two-level calibration hybrid compensation algorithm is proposed. An experimental prototype of a piezoelectric six-dimensional accelerometer is fabricated. Calibration and test experiments of accelerometer were carried out. The measured results show that the average non-linearity of the proposed algorithm is 2.2628% lower than that of the least square method, the solution time is 0.019382 seconds, and the proposed algorithm can realize the real-time measurement in six dimensions while improving the measurement accuracy. The proposed algorithm combines real-time and high precision. The research results provide theoretical and technical support for the calibration method and online compensation technology of the 6-dimensional accelerometer.

• Journal of electromagnetic engineering and science
• /
• 제8권4호
• /
• pp.144-147
• /
• 2008

This paper proposes a tunable combline bandpass filter with high selectivity, constant bandwidth, and good stopband performances. A filter with these characteristics is obtained by applying cross-coupling to the conventional combline bandpass filter using stepped-impedance resonators(SIRs). For high selectivity and constant bandwidth, cross-coupling is utilized and the SIR configuration is used for enhanced stopband performances. The proposed combline tunable bandpass filter with 5% of fractional bandwidth at 1.6 GHz was fabricated and tested. The measured results showed 11.6% tunability with constant bandwidth, high selectivity and enhanced stopband characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.557-560
• /
• 1999

The design of large area thin film transistor liquid crystal displays (TFT-LCDs) requires consideration of cross-talks between the data lines and pixel electrodes. These limits are imposed by the parasitic capacitive elements present in a pixel. The capacitive coupling of the data line signal onto the pixel causes a pixel voltage error. In this study semi-empirical capacitance model which is adopted from VLSI interconnection capacitance calculations was used to calculate mutual coupling capacitances. With calculated mutual coupling capacitances and given image pattern, the root mean square(RMS) voltage of pixel is calculated to see vertical cross-talk from the first to the last column. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.991-993
• /
• 2003

본 논문에서는 영구자석 기기에서 발생하는 d-q축간의 상호 포화(cross saturation) 문제에 대해 다루었고, 이를 고려한 d축과 q축의 전류에 따른 전동기의 특성값을 수치 해석적으로 도출하는 방법을 제시하였다. 아울러 다층 회전자 구조를 지닌 매입형 영구자석 전동기(multi-layer buried magnet synchronous motor)의 d축 및 q축 인덕턴스 값을 교차 결합 특성(Cross-Coupling)을 고려하여 수치 해석적 기법을 통해 도출하였으며, 실험값과의 비교를 통해서 기존의 해석 방법보다 우수함을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.129-130
• /
• 2007

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2789-2792
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.453-454
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.81-82
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.726-728
• /
• 2009

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1648-1654
• /
• 2016

This paper analyzes complex vector current control for the enhanced cross-coupling compensation in accordance with parameter variation in grid-connected inverter system, and verifies through simulation and experiment. Complex vector current control is performed in the synchronous reference frame through d-q transformation. It generates cross-coupling components with rotating nominal angular frequency. In general, cross-coupling elements are compensated by decoupling terms added to output of conventional decoupling PI controller. But, it is impossible to compensate them perfectly which transient response is especially deteriorated such as large overshoot and slow tracking, when variation of grid impedance or measurement error occurs. However, complex vector current control can improve stability and response characteristic of current control regardless of the situation as before. Decoupling controller and complex vector controller are represented through complex forms, and these controllers are analyzed by using frequency response in s-domain, respectively. It is verified that complex vector controller has more superior response characteristic than decoupling controller through MATALB, PSIM and experimental in 5kW grid-connected inverter when L filter parameter is varied from 1.1mH to increase double, 2.2mH.