• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.8-13
• /
• 2008

The paper proposes a model-based measurement of unsteady flow rate by using distributed parameter pipeline model and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-diagnostics functions of the measurement method, the validity is investigated by comparison with the measured and estimated pressure and flow rate wave forms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate wave forms and theoretical those under unsteady laminar flow conditions. The method proposed here is useful in estimating unsteady flow rate through an arbitrary cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.23-27
• /
• 2006

Rubber is used in many industrial products, such as hoses, rubber belts, and oil seals. In particular, more than 200 rubber parts are used in automobiles. The design technology of these parts is largely dependent on field experience, which leads to lengthy and expensive developing procedures. However, with the help of recent developments in nonlinear computer analysis, new rubber products can be developed at low cost. In this study, rubber injection molding design variables, such as location and number of gates, were optimized using computer-aided engineering with the cross-WLF equation to produce CLIP rubber products made from ethylene propylene diene monomer(EPDM). The validity of the proposed design was evaluated by comparison with actual forming results.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.159-167
• /
• 2014

In this study the process of normalizing hydraulic head loss rate was developed for the purpose of estimation of seepage blocking state at each seepage segment in sea dike embankment. Pore water pressure sensors were installed with some interval along seepage path, then the hydraulic head loss rate at each segment between pore water pressure sensors was calculated, and then the calculated hydraulic head loss rate was normalized based on seepage path length. The comparison of normalized hydraulic head loss rates showed that the cross section of sea dike embankment was homogeneous approximately and the width of cross section was long enough to blocking tide water.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.493-501
• /
• 1996

An understanding of consumers' evaluative processes and the consumer variables that influence cross-cultural evaluations of foreign products is essential to effectively penetrate international markets. This study compared consumers in two developing countries, Korea and Mexico, regarding their product evaluations and purchase intentions for US Levi's jeans. Both Korean and Mexican consumers are generally quality and price conscious. Korean consumers appeared to be more value-conscious than Mexican consumers. Mexican consumers exhibited high level of brand and prestige conscious behavior. Findings in this study support that culture bound consumer characteristics vary from country to country resulting in differences in perception of quality, value and purchase intentions for a particular product. The perception of product quality differs from perception of value and subsequent willingness to buy. For a comprehensive understanding of consumer purchase behavior, the impact of value-conscious attitude on percetion of quality and on purchase intentions should be examined.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.16-20
• /
• 2005

Additions of ground garlic, chili and ginseng powder did not affect the breaking force and strain of directly heated gel of Alaska pollack surimi. In comparison, these additives reduced the setting effect achieved by incubation of the salted surimi at $25^{\circ}C$, and resulted in a decreased breaking force and strain for the two step heated gel. Garlic almost completely inhibited the myosin cross-linking reaction, an important reaction for improving the gel properties occurring in the setting process. However, chili and ginseng powder minimally inhibited the cross-linking reaction. Thus, this study proposes that the mechanism for the suppression of the setting effect by chili and ginseng is different from that of garlic.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.391-397
• /
• 2011

An inductance measurement method for interior permanent magnet synchronous machine (IPMSM) is proposed in this paper. In this method, the motor is measured at standstill condition, and only a 3-phase voltage source, an oscilloscope and a DC voltage source are required. Depending on the deductive dq-axis voltage equations in the stationary frame of reference, the dq-axis inductances at different current magnitude and vector angle can be calculated by the measured 3-phase voltages and currents. And hence, the saturation and cross-magnetizing effect of the inductances are measurable. This paper introduces the principle equations, experiment setup, data processing, and results comparison on the concentrated-winding and distributed-winding IPMSMs.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.151-157
• /
• 2014

We have reported the reaction probability, integral reaction cross section, and rate constant for the title system calculated with the aid of a time-dependent wave packet approach. The ab initio potential energy surface (PES) of Prudente et al. (Chem. Phys. Lett. 2009, 474, 18) is employed for the purpose. The calculations are carried out over the collision energy range of 0.05-1.4 eV for the two reaction channels of H + LiH ${\rightarrow}$ Li + $H_2$ and $H_b$ + $LiH_a$ ${\rightarrow}$ $LiH_b$ + $H_a$. The Coriolis coupling (CC) effect are taken into account. The importance of including the Coriolis coupling quantum scattering calculations are revealed by the comparison between the Coriolis coupling and the centrifugal sudden (CS) approximation calculations.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.602-605
• /
• 2009

Digital content piracy has been shown to be an emerging societal problem, However, Studies on digital content piracy are very limited. In this paper, we try to find whether Theory of Planned Behavior(TPB) can explain the online digital content piracy in China. In addition to the finding of TPB's usefulness, We also examine the cross-cultural differences between Korea and China in behavior towards online digital content piracy. we argue that cultural factors moderate the strength of the relationships in the TPB model in online digital content piracy. we use a theoretical model of behavior based on the framework of the TPB(Theory of Planned Behavior) and Hofstede's national cultural dimensions. Our results indicate that the general TPB(Theory of Planned Behavior) model of software piracy is broadly applicable to digital content piracy in China. Our findings also show that most of the hypothesized moderating effects of national cultural factors were found to be significant.

• Korea Journal of Hospital Management
• /
• v.20 no.1
• /
• pp.53-64
• /
• 2015

Our objective was to evaluate differences in linear regression versus multilevel(cross-level interaction model) modeling for affecting factors lumbar discectomy. The data were used in 2011 patients with HIRA sample data. Total number of analysis is 3,641 patients and 248 hospitals. The results of research model showed that the type and location of the hospital-level factors were significant. However, all factors of patient-level were similar in the two models. Therefore, it requires the selection of an appropriate model for a more accurate analysis of the influencing factors in the daily medical charge.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.35-41
• /
• 1998

This paper presents a decoupling controller of the missile seeker scan loop with a spin-stabilized platform. A precise seeker motion with respect to the scan command is essential for the higher acquisition probability of the target. As the seeker scan loop is a deeply cross-coupled two input two output system, an accurate pointing or scanning for each axis to the target is very difficult, even though provided with the help of a high performance controller. When a decoupling control is applied to the seeker scan loop, the cross-coupling between two axes can be reduced to a remarkable amount. As a low order of controller is required for the real time operation, a PI controller with decoupling filter is suggested and compared with other controllers. A linearized dynamic model of seeker scan loop is used and validated through the comparison of experimental results of step responses.