• 한국운동역학회지
• /
• 제28권3호
• /
• pp.181-185
• /
• 2018

Objective: The purpose of this study was to investigate the effect of types of drive-in initial steps in basketball on technical factors, to provide basic information for the enhancement of basketball skill. Method: Ten men (age: $24.70{\pm}2.26years$; height: $181.00{\pm}5.72cm$; weight: $75.70{\pm}8.23kg$; career length: $10.00{\pm}3.59years$), each with a career length of over five years and no history of injury to the lower extremities within the prior six months, participated in this study. They were asked to perform four types of drive-in movements at $35{\sim}60^{\circ}$, wearing their own shoes, after running from a start line 5 m away and catching a basketball passed by an expert passer. The drive-in movements were measured by eight infrared cameras (Oqus 300, Qualisys, Sweden). Collected raw data were used to calculate total initial step time, displacement, velocity, center of mass (COM) height, and COM velocity. Results: Total initial step displacement and velocity of cross drive-ins (JC, SC) were greater than that of direct drive-ins (JD, SD; p < .05). COM velocity of cross drive-ins (JC, SC) was also greater than that of direct drive-ins (JD, SD; p < .05). Conclusion: Our results indicated that cross drive-ins, regardless of stop step type, are more effective than direct drive-ins. This is because cross drive-ins are technically bold due to less influence from walking violations and double dribble rules in basketball. However, using one-sided movement is too difficult to play in competitive game; therefore, basketball players should develop the ability to choose appropriate movement frequency.

• 한국의류산업학회지
• /
• 제17권2호
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• 정보관리연구
• /
• 제36권4호
• /
• pp.155-174
• /
• 2005

최근 국가적 필요성의 인식 하에 과학기술정보, 특히 연구개발정보의 종합적 수집 관리 및 유통을 위한 국가 과학기술 종합정보 시스템(NTIS)의 개발이 논의되고 있다. 국가 과학기술 종합정보 시스템은 연구개발 프로세스, 연구개발활동, 연구개발정보, 연구개발 데이터 레벨의 구성요소들 간의 유기적 연계를 그 근간으로 한다. 본 논문에서는 국가 과학기술 종합정보 시스템의 개발에 기반이 되는 연구개발정보들 간의 상호연계 모델을 제안한다. 연계를 위해 고려되는 연구개발정보는 연구과제정보, 연구인력정보, 연구성과정보로 연구개발활동에 있어 매우 중요한 정보라 할 수 있다. 제안된 연계 모델을 통해 연구개발정보들 간의 상호 참조 및 탐색이 가능하며, 다양한 관점에서 다양한 형태의 질의를 수행할 수 있다. 연계 모델은 ISO13250 표준인 XML Topic Map을 이용하여 개발되었으며, 예제를 통해 연계 모델의 우수성 및 향후 활용가능성을 살펴보았다.

• 한국수자원학회논문집
• /
• 제52권12호
• /
• pp.963-973
• /
• 2019

본 연구는 도시침수 위험기준이 산정되지 않은 지역의 예·경보 기준을 예측하기 위해 유역특성 자료와 피해이력 기반으로 산정된 한계강우량을 활용하여 도시침수 위험기준을 추정하는 모델을 검토하였다. 위험기준 추정모델은 머신러닝 알고리즘의 하나인 Support Vector Machine을 이용하여 설계하였으며, 학습자료는 지역별 한계강우량과 유역특성으로 구성하였다. 학습자료는 정규화 한 후 SVM 알고리즘에 적용하였으며, SVM에 적용시 Leave-One-Out과 K-fold 교차검증 알고리즘을 이용하여 절대평균오차와 표준편차를 계산한 후 모델의 성능을 평가하였다. Leave-One-Out의 경우 표준편차가 작은 모델이 최적모델로 선정되었으며, K-fold의 경우 fold의 개수가 적은 모델이 선정되었다. 선정된 모델의 지속시간별 평균 정확도는 80% 이상으로 나타나 침수 위험기준 추정을 위해 SVM을 활용가능 할 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1070_1071
• /
• 2009

Recently, small hydropower attracts attention because of its clean, renewable and abundant energy resources to develop. Therefore, a cross-flow hydraulic turbine is proposed for small hydropower development in this study. The turbine‘s simple structure and high possibility of applying to the sites of relatively low effective head and large flow rate can be advantages for the introduction of the small hydropower development. The purpose of this study is not only to investigate the effects of air layer in the turbine chamber on the performance and internal flow of the cross-flow turbine, but also to suggest a newly developed air supply method. CFD analysis for the performance and internal flow of the turbine is conducted by an unsteady state calculation using a two-phase flow model in order to embody the air layer effect on the turbine performance effectively. The result shows that air layer effect on the performance of the turbine is considerable. The air layer located in the turbine runner passage plays the role of preventing a shock loss in the runner axis and suppressing a recirculation flow in the runner. The location of air suction hole on the chamber wall is very important factor for the performance improvement. Moreover, the ratio between air from suction pipe and water from turbine inlet is also significant factor of the turbine performance.

• Journal of Microbiology and Biotechnology
• /
• 제30권5호
• /
• pp.739-748
• /
• 2020

In this study, a method of heat adaptation was implemented in an attempt to increase the upper thermal threshold of two Streptococcus thermophilus found in South Korea and identified the alterations in membrane fatty acid composition to adaptive response to heat. In order to develop heat tolerant lactic acid bacteria, heat treatment was continuously applied to bacteria by increasing temperature from 60℃ until the point that no surviving cell was detected. Our results indicated significant increase in heat tolerance of heat-adapted strains compared to the wild type (WT) strains. In particular, the survival ratio of basically low heat-tolerant strain increased even more. In addition, the strains with improved heat tolerance acquired cross protection, which improved their survival ratio in acid, bile salts and osmotic conditions. A relation between heat tolerance and membrane fatty acid composition was identified. As a result of heat adaptation, the ratio of unsaturated to saturated fatty acids (UFA/SFA) and C18:1 relative concentration were decreased. C6:0 in only heat-adapted strains and C22:0 in only the naturally high heat tolerant strain were detected. These results support the hypothesis, that the consequent increase of SFA ratio is a cellular response to environmental stresses such as high temperatures, and it is able to protect the cells from acid, bile salts and osmotic conditions via cross protection. This study demonstrated that the increase in heat tolerance can be utilized as a mean to improve bacterial tolerance against various environmental stresses.

• 정보보호학회논문지
• /
• 제28권3호
• /
• pp.695-706
• /
• 2018

최근 제조업을 시작으로 농업, 금융업 등의 전 산업 영역에서 ICBM(IoT, Cloud, Bigdata, Mobile)을 중심으로 한 신산업과의 융합이 급속도로 진행되고 있다. 향후 융합산업의 가장 큰 문제 중 하나인 사이버 위협에 대비하기 위해 정보보호를 고려한 융합산업의 발전이 매우 중요한 상황이다. 이에 본 연구에서는 현재 발표된 산업발전정책과 이와 관련된 정보보호정책들의 세부 내용을 교차영향분석으로 분석하고 전문가 설문을 통해 정책의 우선순위를 제시하였다. 이를 통해 정보보호정책 내의 우선순위 및 상호 연관성을 밝히고, 효과적인 정책 시행방향에 대해서 제시하고자 하였다. 결과적으로 본 연구에서 도출한 6개의 정보보호정책과제들은 모두 핵심 동인에 속하며, 정책의 중요도를 고려한다면 보안 산업의 체질개선 및 지원 강화, 정보보호 인재양성, 정보보호산업 투자확대 등의 정책이 상대적으로 우선 시행될 필요가 있는 것으로 나타났다.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.83-97
• /
• 2018

터널은 도로, 철도, 지하철과 같은 교통의 통로이자 수로, 전력구, 비축기지와 같은 특수목적을 위해 널리 활용되고 있으며, 터널의 사용 목적, 주변 지반조건 및 경제성에 따라 다양한 터널 형상으로 시공되고 있다. 이에 대해 기존 터널과 주변지반 및 구조물에 관한 연구는 꾸준하게 발표되었으나 단일 형상에 대해 터널굴착 시 주변 지반과 구조물의 거동을 분석한 연구들이 대다수이다. 터널의 붕괴사고는 지상 구조물의 붕괴사고 보다 막대한 인적, 물적 손실을 가져오기 때문에 터널 굴착 및 주변지반의 거동을 관측하고 분석하는 작업은 매우 중요하며, 단일 형상이 아닌 다양한 터널 형상에 대한 연구가 필요할 것으로 판단된다. 따라서, 본 연구는 trapdoor장치를 이용한 실내 모형시험을 통해 군말뚝 하부에 터널 정거장 굴착 시 주변지반의 거동을 측정하였다. 이때 터널 정거장 형상의 단면을 arch와 box 형태로 제작하였으며, 각 터널 정거장 형상 별 0.1B, 0.25B, 0.4B로 터널과 군말뚝 간 이격거리를 다르게 하여 다양한 조건에서의 지반거동을 분석하였다. 또한, 근거리 사진계측 및 이미지프로세싱 기법을 통해 지반의 거동을 관측하였으며, 유한요소 수치해석을 통해 실내 모형시험, 근거리 사진계측의 결과와 비교 분석하였다.

• 대한수의학회지
• /
• 제48권3호
• /
• pp.267-274
• /
• 2008

This study was to evaluate the efficacy of single dose Mycoplasma hyopneumoniae (M. hyo)-vaccination in the swine farms which had different serological patterns of porcine reproductive and respiratory syndrome virus (PRRSV) and porcine circovirus type 2 (PCV2). A minimum of 240 pigs from each farm was applied, allocating M. hyo vaccinated and control groups. The PRRSV and PCV2 infections were analyzed by serological method (commercial ELISA kit). After administrating pigs a single dose of M. hyo vaccine or control saline at 3 weeks of age, serum antibodies to M. hyo, PRRSV and PCV2 were monitored at 4, 10, 16 and 22 weeks of age. Mortality, weight changes, feed conversion ratio (FCR) and lung score were also evaluated. A single-dose vaccination of M. hyo bacterin was efficacious to reduce mycoplasmal lung lesions and induce good humoral immune response. However, FCR was improved only in one of the three farms where showed seronegative status to both PRRSV and PCV2 in the period from 4 to 16 weeks of age. These results might imply that M. hyo vaccine alone could not overcome the PRRSV and PCV2 infection-associated wasting in the field condition. Therefore, the control of PRRSV and PCV2 should be considered to obtain the better effects of M. hyo vaccination.

• Clinics in Shoulder and Elbow
• /
• 제19권3호
• /
• pp.155-162
• /
• 2016

Background: The study aimed to determine the type of capsular insertion and the extent of capsular elongation in anterior shoulder instability by quantitatively evaluating their computed tomography arthrographic (CTA) findings, and to investigate the correlation of these parameters with surgical outcomes. Methods: We retrospectively reviewed 71 patients who underwent CTA and arthroscopic capsulolabral reconstruction for anterior shoulder instability between April 2004 and August 2008. The control group comprised 72 patients diagnosed as isolated type II superior labrum anterior to posterior (SLAP) lesion during the period. Among the 143 patients, 71 were examined with follow-up CTA at an average 13.8 months after surgery. It was measured the capsular length and cross-sectional area at two distinct capsular regions: the 4 and 5 o'clock position of the capsule. Results: With regards to the incidence of the type of anterior capsular insertion, type I was more common in the control group, whereas type III more common than in the instability group. Anterior capsular length and cross-sectional area were significantly greater in the instability group than in the control group. Among patients of the instability group, the number of dislocations and the presence of anterior labroligamentous periosteal sleeve avulsion lesion were significantly associated with anterior capsular redundancy. Postoperatively, recurrence was found in 3 patients (4.2%) and their postoperative capsular length and cross-sectional area were greater than those of patients without recurrence. Conclusions: Capsular insertion type and capsular redundancy derived through CTA may serve as important parameters for the management of anterior shoulder instability.