• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1262-1270
• /
• 2007

본 논문에서는 feedforward와 post-distortion 기법을 이용하여 평형 증폭기 내에서 발생하는 혼변조 왜곡 성분을 제거할 수 있는 새로운 왜곡 상쇄 메커니즘인 cross post-distortion 선형화 기법을 제안한다. 출력 동적 영역과 대역폭 측면에서 제안하는 선형화 방식은 기존의 feedforward 방식에 뒤지지 않는 성능을 가지고 있으면서 상대적으로 높은 효율을 제공한다. 이론적 뒷받침을 위해 제안하는 시스템과 feedforward 방식의 전력 증폭기와 오차증폭기의 전력 용량을 비교 분석하였고, IMT-2000 대역에서 실제 구현을 통하여 이를 실험적으로 뒷받침하였다. 최대 출력 전력 240 W의 기지국용 상용 대전력 증폭기에 적용했을 때, wideband code division multiple access (WCDMA) 4FA 신호에 대하여 평균 출력 전력 40 dBm에서 약 18.6 dB의 개선 효과를 얻었다. 제작된 전력 증폭기는 WCDMA 신호 기준으로 feedforward 방식에 비해 약 2 % 개선된 효율을 보였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2441-2446
• /
• 2018

This paper presents a radio frequency-to-direct current (RF-to-DC) converter for special RF power harvesting application at 915 MHz. The major featured components of the proposed RF-to-DC converter is the combination of a cross-coupled rectifier and an active diode: first, the cross-coupled rectifier boosts the input voltage to desired level, and an active diode blocks the reverse current, respectively. A prototype was implemented using $0.18{\mu}m$ CMOS technology, and the performance was proven from the fact that the targeted RF harvesting system's full-operation with higher power efficiency; even if the system's input power gets lower (e.g., from nominal 0 to min. -12 dBm), the proposed RF-to-DC converter constantly provides 1.47 V, which is exactly the voltage level to drive follow up system components like DC-to-DC converter and so on. And, maximum power conversion efficiency is 82 % calculated from the 0 dBm input power, 2.3 mA load current.

• 대한기계학회논문집B
• /
• 제33권4호
• /
• pp.215-224
• /
• 2009

Analysis for various driven nozzle position changes. The analysis was done for different Reynolds number in entrance region of jet-pump and for several diameter ratios of driven nozzle. (1) The largest absorption energy was found at the point s=1 in condition of diameter ratio 1:3.21 and point s=0.5 in condition of diameter ratio 1:2.25. (2) The absorption energy was not related to the change of entrance velocity and the driven nozzle position having the largest absorption energy was function for cross section ratio. (3) As the position of driven nozzle moves to the downstream, the absorption energy gets weaker. Because the energy from swirl was lost at the cross section gets smaller. (4) As the position of driven nozzle moves to the downstream, the injection energy leans to the upper direction wall and as the Reynolds number increase, the lean phenomenon is more distinct. (5) The flow quantity of driven nozzle, the diameter ratio 1:3.21, was 32% higher than that of 1 : 2.25 and as the inlet velocity gets faster the efficiency decreased. And as the cross section of the driven nozzle increases.

• 한국통신학회논문지
• /
• 제29권3A호
• /
• pp.248-256
• /
• 2004

Woerner는 비동기 트레리스 부호화 DS/COMA (asynchronous treilis-coded DS/CDMA systems, A-TC-CDMA) 시스템에 낮은 상관도의 다중 시퀀스 시그날링인 배직교 시퀀스 (biorthogonal sequence)를 이용함으로써 단일 시퀀스 시그날링인 M-ary PSK에 비해 보다 개선된 시스템 성능을 얻을 수 있음을 보여주었다. 본 논문에서는 최근 기 제안된 다중 시퀀스 시그날링 방식인 OPSM (orthogonal plane sequence modulation)과 배직교 시퀀스를 이용한 비동기 트레리스 부호화 CDMA 시스템 성능을 상호 비교 분석한다. 가입자 수신신호의 상호간섭 랜덤변수의 모멘트를 유도하고 그 결과 배직교 시퀀스 시그날링 방식에 비해 적은 수의 심볼당 시퀀스를 갖는 OPSM(orthogonal plane sequence modulation)이 시퀀스간 낮은 상호상관도 특성을 가짐을 보여준다. 또한 컴퓨터 시뮬레이션을 통하여 다중 시퀀스 시그날링 비동기 트레리스 시스템의 전력 효율 및 스펙트럼 효율을 비교 검증한다.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.239-244
• /
• 2015

Chemical mechanical polishing (CMP) is one of the most important processes for enabling sub-14 nm semiconductor manufacturing. Moreover, post-CMP defect control is a key process parameter for the purpose of yield enhancement and device reliability. Due to the complexity of device with sub-14 nm node structure, CMP-induced defects need to be fixed in the CMP in-situ cleaning module instead of during post ex-situ wet cleaning. Therefore, post-CMP in-situ cleaning optimization and cleaning efficiency improvement play a pivotal role in post-CMP defect control. CMP in-situ cleaning module normally consists of megasonic and brush scrubber processes. And there has been an increasing effort for the optimization of cleaning chemistry and brush scrubber cleaning in the CMP cleaning module. Although there have been many studies conducted on improving particle removal efficiency by brush cleaning, these studies do not consider the effects of brush contamination. Depending on the process condition and brush condition, brush cross contamination effects significantly influence post-CMP cleaning defects. This study investigates brush cross contamination effects in the CMP in-situ cleaning module by conducting experiments using 300mm tetraethyl orthosilicate (TEOS) blanket wafers. This study also explores brush pre-treatment in the CMP tool and proposes recipe effects, and critical process parameters for optimized CMP in-situ cleaning process through experimental results.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.74-79
• /
• 2008

The fracture strength of cross groove type constant velocity joint is largely determined by the fracture strength of the cage having window-like pockets for retaining the torque transmitting balls. A stress distribution acting on the cage is influenced by rigidities of the rim portion and of the column members, therefore requires a calculation such as FEA. To analyze fracture strength of cage, a 3-D elasto-plastic finite element analysis and a submodeling technique are used to achieve both computational efficiency and accuracy. The results are in reasonably good agreement with experiment.

• 대한설비공학회지:설비저널
• /
• 제17권2호
• /
• pp.131-139
• /
• 1988

The thermoacoustic oscillation induced in an air column with variable cross section area is investigated theoretically and experimentally. The onset condition of the oscillation is derived by equating the acoustic power production to the power dissipation. The power production at the heater is predicted by using the efficiency factor obtained by heat transfer analysis for a single wire in a uniform cross flow and considering the interference between heater wires. The power dissipation is estimated by measuring the attenuating coefficient from the pressure decay curve. The theoretical prediction to the onset condition of the oscillation is confirmed experimentally. The effect of the variation of the column cross section area on the onset condition is presented.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.29-32
• /
• 2008

Hinged cross bar which is fitted for buyer's special item in cell guide of container vessels has an advantage of efficiency on container loading. In this paper, the main focus is to confirm the structural adequacy of hinged cross bar supporting structure in cell guide under the considered loading condition for container vessel.

• 응용통계연구
• /
• 제14권1호
• /
• pp.59-70
• /
• 2001

이면교배 실험은 식물이나 동물의 교배를 통해 자식계통의 유전적인 성질을 조사하는데 중용한 역할을 한다. 이면교배에 관한 기존의 연구에서는 p개의 자식계통은 하나의 집합에 속하는 것으로 간주하였다. 이와 달리 새로 육성된 자식계통의 유전적 성질을 평가하고자 하는 경우에는, p개의 자식계통이 각각 p$_1$과 p$_2$개의 자식계통을 갖는 두 개의 집합으로 분리되는 형태의 교배실험을 사용한다(단, p=p$_1$+p$_2$). 이에 본 연구에서는 자식계통이 두 집단으로 분리된 경우에 대해서 Kempthorne의 합동식을 이용하여 두 군간 교배에 대한 블록디자인을 설계하고, 이에 대한 평균효율인자를 계산하는 방법을 제안하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.185-187
• /
• 2004

In many multiple output SMPS, the cross regulation between the output voltage is so poor that the linear regulator is usually added to avoid this problem. Therefore, manufacturing cost is increased. In this paper, the TTFC(Two Transistor Forward Converter) using the magamp was presented to obtain better cross regulation between the multiple output SMPS. Also, as the synchronous rectifier was applied in the secondary section, whole efficiency can be improved. In this paper, the mode analyses in steady slate and experimental results of the prototype to verify the validity of the presented converter are presented and discussed.