• Wind and Structures
• /
• 제7권1호
• /
• pp.41-54
• /
• 2004

An analysis refinement of the Messina Strait suspension bridge project has been recently required, concerning mainly the yaw angle effects on the multi-box deck section aerodynamics and the vortex shedding at low reduced velocities $V^*$. In particular the possible interaction of the axial flow with the large cross beams has been investigated. An original test rig has been designed at this purpose allowing for both forced motion and free motion aero elastic tests, varying the average angle of attack ${\alpha}$ and the deck yaw angle ${\beta}$. The hydraulic driven test rig allowed for both dynamic and stationary tests so that both the stationary coefficients and the flutter derivatives have been evaluated for each yaw angle. Specific free motion tests, taking advantage from the aeroelastic features of the section model, allowed also the study of the vortex shedding induced phenomena.

• International Journal of Advanced Culture Technology
• /
• 제9권2호
• /
• pp.1-9
• /
• 2021

Focusing on China's profound historical/cultural heritage, as well as its favorable environment for the expansion of cultural and creative industries (CCIs), this paper considers the unique attributes of Chinese museum cultural and creative products (MCCPs) from the angle of cross-border development, and summarizes the main forms and effects of cross-border innovation in relation to Chinese MCCPs. It also examines the chief problems of Chinese MCCPs' cross-border growth at three levels - the national policy system, product development, and design and marketing - to explore countermeasures and suggestions for cross-border novelties and the advancement of products.

• 한국방재안전학회논문집
• /
• 제16권1호
• /
• pp.81-89
• /
• 2023

최근 이상기후의 영향으로 전 지구적 온난화 및 도시화로 인해 세계적으로 기상이변이 늘어나고 있다. 도시화 및 난개발로 인한 불투수 면적의 증가 같은 문제로 홍수량이 증가함에 따라 홍수피해를 줄이기 위한 다양한 방안이 제시되고 있다. 본 연구에서는 사행하천 구간에 설치되는 횡월류 위어 유입각의 변화에 따라 3차원 CFD 모형인 FLOW-3D를 이용하여 흐름 특성과 월류량을 분석하여 횡월류 위어 유입각에 대한 수공구조물의 월류능력 평가 및 유량계수 산정을 위한 기초 연구를 수행하였다. 분석 결과, 횡월류 위어 유입각이 작을수록 횡월류부 통과 후 주수로 흐름의 수위가 감소하고 유속이 증가하였으며, 유입각이 증가할수록 수위가 상승하였고, 유속이 감소하는 경향을 보였다. 또한, 횡월류 위어 유입각이 40° 이상인 경우 직하류 유속이 상류 유속과 비교하여 감소하는 것을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.73-82
• /
• 2016

Recently, automobile industries have been developing many structural automotive parts made of thin, high-strength steel strips to produce safer and more environmentally friendly cars. The roll forming process has been considered one of the most efficient processes in manufacturing high-strength steel parts because it is a high-speed process that forms sheets in increments. However, most automotive parts vary longitudinally in their cross-sections. Therefore, it is difficult to apply the roll forming process to automotive parts made of high-strength steel. A variable section roll forming process has been proposed in recent studies. The rotational axes of the forming rolls are fixed, and the forming rolls have three-dimensional shape. As such, the cross-section of the part varies linearly along its length, and the angle between the bend line and longitudinal axis is less than 1 degree. Thus, the rate of cross-sectional variation along the length is relatively small. In this study, the rate of cross-sectional change along the length of a forming roll has been increased. Moreover, the angle between the bend line and longitudinal axis has been increased up to 15 degrees. The variable sections of the forming rolls have been designed for high strength steel parts with a symmetric u-type cross-section that varies linearly and symmetrically along the longitudinal axis.

• Composites Research
• /
• 제36권1호
• /
• pp.48-52
• /
• 2023

섬유 강화 복합재료는 방향성을 가지고 있기 때문에 적층 순서에 따라서 구조물의 기계적인 특성은 매우 달라질 수 있다. 따라서, 상황과 용도에 따른 복합재료 구조물의 적층 설계는 필수적이다. 그러나 제작된 복합재료 구조물의 적층 각도는 제작 환경이나 구조물 형상에 따라 설계 값과 편차를 가지는 경우가 많으며, 이는 구조적 성능에 영향을 끼칠 수 있다. 따라서 구조물의 신뢰성 확보를 위해서는 적층 설계 뿐만 아니라 제작된 복합재료의 적층각에 대한 분석 또한 매우 중요하다. 본 연구에서는 합성곱 신경망(Convolutional neural network; CNN) 기반의 딥러닝(Deep learning)을 이용하여 섬유 강화 복합재료의 실제 단면 이미지로부터 적층 각도를 예측하였다. 여러 적층 각도를 가지는 탄소 섬유 강화 복합재료 시편을 제작하고, 광학 현미경을 이용하여 Micro-scale로 실제 단면을 촬영하였다. 다양한 적층 각도에 따른 복합재료 시편의 단면 이미지 데이터를 이용하여 합성곱 신경망 기반의 딥러닝 모델에 대하여 학습을 수행하였다. 그 결과 높은 정확도로 실제 섬유 강화 복합재료 단면 이미지로부터 적층 각도를 예측할 수 있었다.

• 대한물리치료과학회지
• /
• 제24권3호
• /
• pp.12-17
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of backrest angle on lower extremity muscle strength in adult. Method: This research results are based on 10 healthy adults. 10 degree difference in pelvic angle does not effect the cross-connection of the Hamstring muscles, and created 3 types of rest with 20 degree differences each at 95, 115, and 135 degree angles. Result: significantly difference in contractibility muscle strength in accordance to the 3 rake angle. Conclusion: After putting together all these results, since both the expansibility muscle strength and contractibility muscle strength of the knee showed to be effected as the backrest angle changed during isokinetic muscle strength assessment, further research should be conducted if similar research results as this study can be acquired at various angles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.650-653
• /
• 1998

In this paper, when we control Elevation Angle and Azimuth Angle of Antenna, intend to implement sensor system for stabilization control of antenna pedestral system because of wind in land, wave and external disturbances such as rolling, pitching, and yawing. Therefore, this sensor system is consist of Tilt Sensor for measuring absolute angle of roll ing and pitching, Level Rate Sensor, Cross Level Rate Sensor, Azimuth Rate Sensor for controlling short_term azimuth angle and Flux Gate Sensor for measuring long_term azimuth angle.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.135-144
• /
• 1998

High speed machining is a key issue in die and mold manufacturing recently. Even though this technology has great potential of high productivity. tool wear accelerated by high cutting speed to the hardened materials is other barrier. In this research, we attempted to reduce tool wear by considering tool inclination angle between tool and workpiece. The boundary lines describing machined sculptured surfaces were represented by both of cutting envelop condition and the geometric relationship of successive tool paths. Chip cross section, and cutting length could be obtained from the calculated cutting edge and the rotational engagement angle. From the simulation results, machining inclination angle of tool of $15^\circ$ was good enough from the point of tool wear and cutting force, and this value was verified through the cutting experiment of high speed ball end milling.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.560-568
• /
• 2004

We performed the numerical study on the characteristics of the 3-D airflow and dynamic cross contamination in the photolithography process cleanroom. The nonunifurmity, the deflection angle and the global cross contamination were used for analyzing the characteristics and performances of cleanroom. From the numerical results, we knew that the airflow characteristics of the cleanrooms are largely affected by the porosity of panel and the adjustment of dampers and the global cross contamination varies with the location of source and the passage of time through the concentration ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.151-156
• /
• 2003

We performed the numerical study on the characteristics of the airflow and cross contamination in the photolithography process cleanroom. The nonuniformity, the deflection angle and the global cross contamination were used for analyzing the characteristics and performances of cleanroom. We knew that the airflow characteristics of the cleanrooms are largely affected by the porosity of panel and the adjustment of dampers. And the numerical result showed that the global cross contamination varies with the location of source and the passage of time.