• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.286-290
• /
• 2016

Background: Activation of air and water in the electron linear accelerator for medical use has not been considered severely. By the new Japanese regulation for protection of radiation hazard, it became indispensable to evaluate of activation of air and water in the accelerator room. The measurement of induced activity in air and water components in the electron energy region of 10 to 20 MeV is very difficult, because this energy region is close to the threshold energy region of photonuclear reactions. Then, we measured the photonuclear reaction yields of $^{13}N$, $^{15}O$, and $^{11}C$ by using the electron linear accelerator. Obtained data were compared with the data calculated by the Monte Carlo method. Materials and Methods: An activation experiment was performed at the Research Center for Electron Photon Science, Tohoku University. Highly purified $SiO_2$, $Si_3N_4$, and carbon disks were irradiated for 10 minutes by bremsstrahlung converted by a tungsten plate. Induced activity from C, N, and O was obtained. Monte Carlo calculation was performed using MCNP5 and AERY (DCHAIN-SP) to simulate the experimental condition. Cross section data were adopted the KAERI dataset. Results and Discussion: In our experiment in hospital, calculated values were not agreed with experimental values. It might be three possible reasons as the cause of this deference, such as irradiation energy, calculation procedure and cross section data. Obtained data of this work, calculated and experimental values were good agreement with each other within one order. In this work, we used KAERI dataset of photonuclear reaction instead of JENDL. Therefore, it was found that the photonuclear cross section data of light elements are most important for yield calculation in these reactions. Conclusion: Further improvement for calculation using a new dataset JENDL/PD-2015 and considering electron energy spreading will be needed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2831-2838
• /
• 2014

This paper proposes the off-line handwritten flowchart symbol recognition algorithm by type and strength of a cross region of the straight line strokes that is extracted based the normalized dominant slope vectors. In the proposed algorithm, first of all, a connector symbol which consisted only curves is recognized by the special features, and the other symbols with straight line strokes are recognized by type and strength of a cross region, and that is extracted by extension of minimum bounding rectangle of the clusters of the normalized dominant slope vectors, and the straight line strokes of the symbols is extracted by the normalized dominant slope vectors. To confirm the validity of the proposed algorithm, the experiments are conducted for 10 different kinds of flowchart symbols that mainly used for computer program, and the number of symbols is 198. Experiment results were obtained the recognition rate of 99.5%, and the flowchart symbols is recognized correctly robust to variations, and then the proposed algorithm were found very effective for off-line handwritten flowchart symbol recognition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• Journal of Veterinary Clinics
• /
• v.25 no.2
• /
• pp.90-95
• /
• 2008

One fresh equine cadaver (two forelimbs) and five non-lamed thoroughbreds (ten sound forelimbs) were examined ultrasonographically through 5.0 MHz linear array transducer with a stand-off pad in palmar pastern region. The normal transverse ultrasonographic images of the superficial digital flexor tendon (SDFT), deep digital flexor tendon (DDFT), straight sesamoidean ligament (SSL), oblique sesamoidean ligament (OSL), and medium scutum could be identified at the region. The mean $\pm$ SD (min.$\sim$max. $mm^2$) of SDFT cross-sectional areas at P1A, P1B, P1C in the region were $110.00{\pm}5.38$ ($100{\sim}128$), $100.00{\pm}5.02$ ($90{\sim}111$), $114.00{\pm}3.33$ ($104{\sim}124$), respectively. The mean $\pm$ SD (min.$\sim$max. $mm^2$) of DDFT cross-sectional areas at each phalanx (P1A, P1B, P1C, P2A, P2B) were $136.00{\pm}4.83$ ($125{\sim}147$), $94.00{\pm}5.43$ ($85{\sim}108$), $99.00{\pm}4.87$ ($90{\sim}111$), $115.00{\pm}3.67$ ($108{\sim}124$), $135.00{\pm}3.65$ ($125{\sim}145$), respectively. The mean ratio of SDFT of P1B to DDFT was 0.74, 1.06, 1.01, 0.87, 0.74 at P1A, P1B, P1C, P2A, P2B, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2021

In this paper, we propose a method to find the DoF(Depth of field) that is blurred in an image by focusing and out-focusing the camera through a efficient convolutional neural network. Our approach uses the RGB channel-based cross-correlation filter to efficiently classify the DoF region from the image and build data for learning in the convolutional neural network. A data pair of the training data is established between the image and the DoF weighted map. Data used for learning uses DoF weight maps extracted by cross-correlation filters, and uses the result of applying the smoothing process to increase the convergence rate in the network learning stage. The DoF weighted image obtained as the test result stably finds the DoF region in the input image. As a result, the proposed method can be used in various places such as NPR(Non-photorealistic rendering) rendering and object detection by using the DoF area as the user's ROI(Region of interest).

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.12
• /
• pp.1106-1112
• /
• 2000

In this paper, we present a vision system which measures the cross-section of a hot wire-rod in the steel plant. We developed a mobile vision system capable of accurate measurement, which is strong to vibration and jolt when moving. Our system uses green laser light sources and CCD cameras as a sensor, where laser sheet beams form a cross-section contour on the surface of the hot wire-rod and the reflected light from the wire-rode is imaged on the CCD cameras. We use four lasers and four cameras to obtain the image with the complete cross-section contour without an occlusion region. We also perform camera calibrations to obtain each cameras physical parameters by using a single calibration pattern sheet. In our measuring algorithm, distorted four-camera images are corrected by using the camera calibration information and added to generate an image with the complete cross-section contour of the wire-rod. Then, from this image, the cross-section contour of the wire-rod is extracted by preprocessing and segmentation, and its height, width and area are measured.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.527-533
• /
• 2015

A simplified method for the calculation of dynamic characteristics of initially stressed antisymmetric cross-ply laminated shells is presented in this paper using the natural frequencies under unloading state. The equation of motion of laminated shell with two opposite edges simply supported is investigated on the basis of Rayleigh-Ritz method and Mindlin shell theory with effect of the curvature term. The relationships of the non-dimensional natural frequencies with initial stresses the coeffcients of critical buckling and the boundaries of te dynamic principal instability region can be characterized by the non-dimensional natureal frequencies under unloading state. Numerical examples are presented t verify the simplified equations and to illustrate potential applications of the analysis.

• Archives of Pharmacal Research
• /
• v.24 no.5
• /
• pp.455-465
• /
• 2001

The highly potent cytotoxic DNA-DNA cross-linker consists of two cyclopropa[c]pyrrolo[3,4-3]indol-4(5H)-ones insoles [(+)-CPI-I] joined by a bisamido pyrrole (abbreviated to "Pyrrole"). The Pyrrole is a synthetic analog of Bizelesin, which is currently in phase II clinical trials due to its excellent in vivo antitumor activity. The Pyrrole has 10 times more potent cytotoxicity than Bizelesin and mostly form DNA-DNA interstrand cross-links through the N3 of adenines spaced 7 bp apart. The Pyrrole requires a centrally positioned GC base pair for high cross-linking reactivity (i.e., $5^1$-T$AT_2$A*-$3^1$), while Bizelesin prefers purely AT-rich sequences (i.e., $5^1$-T$AT_4$A*-$3^1$, where /(equation omitted) represents the cross-strand adenine alkylation and A* represents an adenine alkylation) (Park et al., 1996). In this study, the high-field $^1$H-NMR and rMD studies are conducted on the 1 1-mer DNA duplex adduct of the Pyrrole where the 5′(equation omitted)TAGTTA*-3′sequence is cross-linked by the drug. A severe structural perturbation is observed in the intervening sequences of cross-linking site, while a normal B-DNA structure is maintained in the region next to the drug-modified adenines. Based upon these observations, we propose that the interplay between the bisamido pyrrole unit of the drug and central C/C base pair (hydrogen-bonding interactions) is involved in the process of cross-linking reaction, and sequence specificity is the outcome of those interactions. This study suggests a mechanism for the sequence specific cross-linking reaction of the Pyrrole, and provides a further insight to develop new DNA sequence selective and distortive cross-linking agents.

• Communications of the Korean Mathematical Society
• /
• v.11 no.4
• /
• pp.1147-1157
• /
• 1996

Nonlinear ill-posed problems arise in many application including parameter estimation and inverse scattering. We introduce a least squares regularization method to solve nonlinear ill-posed problems with constraints robustly and efficiently. The regularization method uses Trust-Region approach to handle the constraints on variables. The Generalized Cross Validation is used to choose the regularization parameter in computational tests. Numerical results are given to exhibit faster convergence of the method over other methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.314.1-314
• /
• 2002

It has been shown that the vibrational response of a tire can be represented by a set of decaying waves, each associated with a particular cross-sectional shapes, in the region near the contact patch. Thus, it can be concluded that tires can be effectively modeled as lossy waveguides. It has also been shown that the sound radiation from tires is mainly from the region close to contact patch. (omitted)