• 한국강구조학회 논문집
• /
• 제28권4호
• /
• pp.231-242
• /
• 2016

대형기둥의 제작성과 시공성을 고려한 철근콘크리트기둥-강재보 접합부의 상세를 제안하였으며, 이를 적용한 접합부의 내진성능을 연구하였다. 접합부의 보강을 위하여, 교차보, 스터드, U형 타이 등의 상세를 고려하였다. 내진성능의 평가를 위해, 2/3 스케일의 대형내부접합부에 대하여 반복가력실험을 수행하였다. 실험체들은 층간변위비 4.0%를 넘는 우수한 변형능력을 발휘하였으며, 보의 항복과 접합부의 항복이 동시에 발생하였다. 최종적으로는, 접합부의 전단파괴로 하중이 감소하였다. 실험강도는 기존 설계모델과 비교되었다.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.719-731
• /
• 2018

Concrete filled steel tubular (CFST) laced columns have been widely used in high rise buildings in China. Compared to solid-web columns, this type of columns has a larger cross-section with less weight. In this paper, four concrete filled steel tubular laced columns consisting of 4 main steel-concrete tubes were tested under cyclic loading. Hysteresis and failure mechanisms were studied based on the results from the lateral cyclic loading tests. The influence of each design parameter on restoring forces was investigated, including axial compression ratio, slenderness ratio, and the size of lacing tubes. The test results show that all specimens fail in compression-bending-shear and/or compression-bending mode. Overall, the hysteresis curves appear in a full bow shape, indicating that the laced columns have a good seismic performance. The bearing capacity of the columns decreases with the increasing slenderness ratio, while increases with an increasing axial compression ratio. For the columns with a smaller axial compression ratio (< 0.3), their ductility is increased. Furthermore, with the increasing slenderness ratio, the yield displacement increases, the bending failure characteristic is more obvious, and the hysteretic loops become stouter. The results obtained from the numerical analyses were compared with the experimental results. It was found that the numerical analysis results agree well with the experimental results.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2350-2355
• /
• 2015

본 연구에서는 축과 베어링으로 구성된 공작기계 주축 설계를 위한 1차원 유한요소 해석을 자동화하기 위한 툴을 개발하였습니다. 객체지향 프로그래밍을 기반으로 하기 때문에, CAD 시스템의 객체를 사용할 수 있습니다. 스핀들 시스템을 정의하기 위한 축의 단면과 베어링 강성과 같은 최소한의 데이터를 입력할 필요가 있으며, 그 데이터를 기반으로 형상 모델을 먼저 만들고, 그리고, 1차원 빔과 스프링 요소로 구성된 유한요소 모델로 변환합니다. 본 툴을 위해서 개발된 사용자 인터페이스는 사용자가 툴과 상호교류할 수 있도록 도와줍니다. 본 툴은 다수의 설계 변경과 그 후에 수행되는 유한요소해석 과정을 자동화함으로써 최소한의 시간과 노력으로 공작기계 주축 시스템의 근사 최적 설계를 발견할 수 있도록 해줍니다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.107-112
• /
• 2007

To establish the reinforce region and technique through the embankment dike after identifying the region of seawater inflow, we carried out small-loop electromagnetic (EM) survey, electrical resistivity survey and refraction seismic method. We also analyzed the distribution of electrical conductivity in reservoir with depth every two month and monitored water level variations with tidal variation in four observation wells located at seaside and reservoir side in order to analyze the relationship with survey results. From both the cross-correlation between tidal and water level variation at four wells and the distribution of electrical conductivity in reservoir with depth, the major portion of seawater inflow are identified through the embankment dike. From electromagnetic and electrical resistivity survey results, it was found that the seawater inflow were happened through several small regions at seaside and became wider near reservoir side. The 2-D inversion sections of refraction seismic method showed that the pebble-bearing sand layer is spread over the whole region with two to four width. From the this study, small-loop EM, electrical resistivity and refraction seismic surveys accompany with the distribution of electrical conductivity in reservoir with depth and the monitoring results for water level variations are revealed to be effective to identify seawater inflow pathway through embankment dike and to establish the reinforce region and technique through the embankment dike.

• 복식문화연구
• /
• 제16권3호
• /
• pp.488-501
• /
• 2008

The purpose of this study presents bra pattern using the 3D measurements of the upper body subject to women in their 30's. Brassieres available in the market are mostly designed for straight body shape and many women seem to have experienced bearing discomfort in a great extent as they grow older. Brassieres should be designed to cover diverse body types and the accurate measurement of body type and breast shape is needed to accomplish that. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The results of this study showed that the evaluation of experiment brassieres was excellent in every item, and the significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup part.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.1-11
• /
• 2017

본 연구에서는 두 변수 유리함수 근사법에 기반한 3차원 음향 포물선 방정식의 제곱근 연산자의 새로운 근사식을 제안한다. 이 근사식은 기존의 제곱근 연산자에 대한 근사 연구와 비교해서 두 가지의 장점을 가진다. 첫 번째는 광대역 각도 능력이다. 제안된 식은 방위각 $45^{\circ}$에서 3차원 음향 포물선 방정식의 거리 축으로부터 $62^{\circ}$까지 넓은 각도에 대해 정확도를 가지는데, 이 값은 기존에 연구된 3차원 음향 포물선 방정식 알고리즘의 각도 한계의 약 세 배이다. 두 번째로는 본 근사식의 분모는 수심과 횡 거리에 대한 연산자의 곱으로 표현된다는 점이다. 이러한 분할 형태는 3차원 포물선 방정식을 손쉽게 삼중대각행렬 방정식으로 변환할 수 있다는 점에서 수치해석에서 선호된다. 제안된 식의 성능을 검증하기 위해 위상 오차분석을 통해 타 근사법과의 비교 연구가 수행되었고, 제안된 방법은 가장 우수한 성능을 보였다.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.283-289
• /
• 2010

친환경기술과 신재생 에너지 자원에 대한 세계적인 관심이 증가하면서, 플라이휠 에너지 저장 장치는 화학전지나 연료전지와 같은 기존의 에너지 저장 시스템의 대안 중 하나로 부상하고 있다. 플라이휠 에너지 저장장치의 에너지 저장 용량은 극질량 관성모멘트와 회전속도의 제곱에 비례하기 때문에, 가능한 높은 회전속도와 높은 극질량 관성모멘트를 갖도록 설계하는 것이 중요하다. 하지만, 시스템의 운전안정성 확보가 최적설계의 구속조건으로 작용할 수 있다. 본 논문에서는 에너지 저장 용량을 최대화하고 운전안정성 및 외란에 대한 강인성을 확보하는 플라이휠 시스템의 최적설계를 제안한다. 그리고, 기존의 PD 제어에 비교하여 교차궤환제어법이 자이로스코프효과를 줄이고, 에너지 저장밀도를 높이는데 필수적임을 확인하였다.

• Macromolecular Research
• /
• 제13권4호
• /
• pp.293-296
• /
• 2005

Transferrin ($T_{f}$) has been used as a targeting ligand for delivering liposome/interleukin-12 (IL-12) pDNA complexes to cancer cells mostly due to the greater number of transferrin receptors ($T_{f}R$) found on tumor cells than on normal cells. $T_{f}$ was conjugated to liposomes via the reaction of MPB-PE with thiol groups of $T_{f}$ introduced by a heterobifunctional cross-linking agent, N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP). Four days after C26 inoculation when the tumor volume reached ${\sim}100mm^{3}$, tumor-bearing Balb/c mice were injected intravenously with $T_{f}-liposome/IL-12 pDNA$complexes twice a week for 3 weeks. Significant suppression of tumor growth was achieved in the group treated with the $T_{f}-liposome/IL-12 pDNA$ complexes, with a dose of $10{\mu}g$ of IL-12 pDNA showing the highest suppression effect among the tested doses. Similar results were obtained when the therapy was initiated one day after tumor inoculation, although in this case $30{\mu}g$ IL-12 pDNA/$T_{f}-liposome$ complexes showed a significant suppression of tumor growth between 19 and 23 days after tumor inoculation. This result indicates that the transferrin receptor-targeted liposomal system is an efficient delivery agent of therapeutic genes, such as IL-12, in mice and that its potential clinical use warrants further research investigation.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.129-138
• /
• 2012

In this study, three types of large scale multi-tasking machine tools together with core technologies involved have been developed and introduced; a multi-tasking machine tool for large scale marine engine crankshafts, a multi-tasking vertical lathe for windmill parts, and a large scale 5-axis machine tool of gantry type. Several special purpose devices has been necessarily developed for the purpose of handling and machining big and heavy workpieces accurately, such as PTD (Pin Turning Device) with revolving ring spindle for machining eccentric crankshaft pins, hydrostatic rotary table and steady rest for supporting and resting heavy workpieces, and 2-axis automatic swiveling head for high-quality free surface machining. Core technologies have been also developed and adopted on their detail design stage; 1) structural design optimization with FEM structural analysis, 2) theoretical hydrostatic analysis for the PTD and rotary table bearings, 3) box-in-box type cross-rail and octagonal ram design to secure machine rigidity and accuracy, 4) constant spindle rpm control against gravitational torque due to unbalanced workpiece.

• 대한미생물학회지
• /
• 제22권3호
• /
• pp.197-208
• /
• 1987

Chlamydia trachomatis has now shown that this interesting intracellular parasite is a cause of nongonococcal urethritis, infantile pneumonia, pelvic inflammatory disease and epididymitis, in addition to lymphogranuloma venerum and inclusion conjunctivitis. There are several diagnostic methods for C. trachomatis, but the method using monoclonal antibody is the most sensitive and specific. The hybride cell were prepared by fusion of myeloma cell($P_3X_{63}\;Ag_8{\cdot}V_{653}$) of mouse and lymphocyte of mouse(BALB/c) that were immunized with formalin killed C. trachomatis serotype D. The cell mixtures after fusion were dispensed into 640 wells of the 96 well culture plates and continuously cultured in HAT medium for 2 weeks. The supernatants of culture media in 83(13%) wells were reacted with C. trachomatis, which were determined by enzyme-linked immunosorbent assay in 96 well microplate. The clones that secreted antibody to C. trachomatis were cloned by limiting dilution. Only six monoclones secreted antibody to C. trachomatis. The antibody titer of ascitic fluid that collected from same BALB/c mice bearing hybridoma cells was above 1:100,000. These monoclonal antibodies that were IgG reacted with elementary and reticulate bodies of all serotypes(Ba, D, E, F, G, H, J and LGV type-I) using ELISA and indirect immunofluorescence stain, but there were no cross reaction with other bacteria(coagulase negative Staphylococcus, Proteus and E. coli). We concluded these six monoclones secreted the same monoclonal antibody to C. trachomatis. The sensitivity and specificity of the monoclonal antibody compared with Microtrak(confirmatory test of C. trachomatis, Syva) was 100%, respectively.