• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.257-262
• /
• 2015

In this paper, the cross-section properties of thin-walled beam are calculated through KSec2D in consist of Saint-Venant theory. To investigate tendency increasing the thickness, we analysis cross-section using isotropic material. In the asymmetric cross-section, we investigate effect caused cross-section properties accompanied increasing the thickness. The structural properties such as bending stiffness, tosion stiffness per area of each cross-section in three cases is compared through increasing thickness. The warping displacement calculated by KSed2D is modeled by CATIA. In order to show that warping influence the cross-section, the warping shape modeled CATIA is printed 3D printer.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.29-41
• /
• 2020

Cross-beams of modern through truss bridges are connected to truss chord at its nodes and between them. It results in variable rotational end restraint for cross-beams, thus variable bending moment distribution. This feature is captured in three-dimensional modelling of through truss bridge structure. However, for preliminary design or rapid assessment of service load effects such technique of analysis may not be available. So an analytical method of assessment of rotational end restraint for cross-beam of through truss bridges was worked out. Two cases - nodal cross-beam and inter-nodal cross-beam - were analyzed. Flexural and torsional stiffness of truss members, flexural stiffness of deck members and axial stiffness of wind bracing members in the vicinity of the analyzed cross-beam were taken into account. The provision for reduced stiffness of the X-type wind bracing was made. Finally, general formula for assessment of rotational end restraint was given. Rotational end restraints for cross-beams of three railway through truss bridges were assessed basing on the analytical method and the finite element method (three-dimensional beam-element modelling). Results of both methods show good agreement. The analytical method is able to reflect effects of some structural irregularities. On the basis of the obtained results the general values of rotational end restraint for nodal and inter-nodal cross-beams of railway through truss bridges were suggested.

• Journal of Korea Trade
• /
• v.26 no.5
• /
• pp.56-75
• /
• 2022

Purpose - This study examines the influencing factors of China's cross-border e-commerce exports in the context of the current situation and trends of China's cross-border e-commerce development. Through an improved trade gravity model, it provides more in-depth research and constructive opinions on the development of cross-border e-commerce in China. In this paper, factors such as consumption gap, volume of trade frictions, number of tourists, Internet usage and trade openness are added to the formula of the traditional trade gravity model in the improved trade gravity model to examine the influencing factors on China's cross-border e-commerce exports. Design/methodology - According to the empirical analysis, China's cross-border e-commerce exports to ten countries are used as dependent variables, and consumption gap, trade friction volume, trade distance, trade openness and number of Internet users are taken as independent variables. Regression analysis is conducted through a modified gravity model to test whether the hypotheses hold. Findings - The analysis shows that the hypothesis that China's cross-border e-commerce exports are influenced by trade openness, trade distance, consumption gap between trade parties, and the number of Internet users in the importing country is supported by these four hypotheses, but not all independent variables have an impact on them. Specifically, the number of travelers, trade frictions do not have an impact on China's cross-border e-commerce. That is to say, trade friction between China and the United States and political issues such as China-India and China-Japan territorial disputes that emerged before do not affect the development of cross-border e-commerce in China. Originality/value - The analysis shows that the factors influencing China's cross-border e-commerce exports are the trade openness of the importing country, the trade distance, the number of Internet users in the importing country, and the consumption gap between the two sides of the trade. The trade openness and the number of Internet users positively contribute to China's cross-border e-commerce, while the consumption gap and trade distance are negatively related to them. And the analysis found that the Sino-US trade war and the Sino-Indian territorial disputes and other trade frictions to China's cross-border e-commerce exports did not have a substantial impact.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.935-946
• /
• 2000

Elastic-plastic stress analysis has been performed to evaluate the fatigue life of an autofrettaged pressure vessel containing cross-bores subjected to pulsating internal pressure of 200 MPa. Finite element analyses were used to calculate the residual and operating stress distributions of the pressure vessel due to the autofrettage process and pulsating internal pressure, respectively. Theoretical stress concentration factors of 3.06, 2.58, and 2.64 were obtained at the cross-bore of the pressure vessel due to internal pressure, 50%, and 100% autofrettage loadings, respectively. Local stresses and local strains determined from the elastic-plastic finite element analysis were employed to calculate the failure location and fatigue life of the pressure vessel with radial cross-bores, incorporating the low-cycle fatigue properties of the pressure vessel steel and fatigue damage parameters. Increase in the amount of overstrain by autofrettage process moved the crack initiation location from the inner radius toward a mid-wall, and extended the crack initiation life. Predicted fatigue life of the fully autofrettaged pressure vessel with cross-bores increased about 50%, compared to the unautofrettaged pressure vessel. At the autofrettage level higher than 50%, the failure location and fatigue life of the pressure vessel were not significantly influenced by the autofrettage level.

• Applied Microscopy
• /
• v.47 no.2
• /
• pp.77-83
• /
• 2017

Drastic development of ubiquitous devices requires more advanced batteries with high specific capacitance and high rate capability. Large-area microstructure characterization across the stacks of cathode, electrolyte and anode might reveal the origin of the instability or degradation of batteries upon cycling charge. In this study, sample preparation methods to observe the cross-section view of the electrodes for battery in SEM and several imaging tips are reviewed. For an accurate evaluation of the microstructure, ion milling which flats the surface uniformly is recommended. Pros and cons of cross-section polishing (CP) with Ar ion and focused ion beam (FIB) with Ga ion were compared. Additionally, a modified but new cross-section milling technique utilizing precision ion polishing system (PIPS) which can be an alternative method of CP is developed. This simple approach will make the researchers have more chances to prepare decent large-area cross-section electrode for batteries.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.627-632
• /
• 2008

The cross sectional shape of intermediate die is one of important parameters to improve dimensional accuracy of final product in shaped drawing process. Until now, it has been designed by the experience or trial and error of the expert. In this study, the cross sectional shape of intermediate die for spline shape is determined by the electric fields analysis and scale factor method. The result of the electric fields analysis and scale factor method have been compared with that of the expert method. The effects of cross sectional shape on the dimensional accuracy were investigated by using FE-simulation. And then the multi-stage shaped drawing experiments were performed to verify the results of FE-simulation. As a result, the cross sectional shape from the electric fields analysis and scale factor method had the good dimensional accuracy. These two methods can be used for the method to obtain the cross sectional shape of intermediate die in shaped drawing process.

• Journal of Information Technology Services
• /
• v.13 no.2
• /
• pp.251-259
• /
• 2014

Outdoor cultural properties have been damaged by natural weathering and air pollution for a long time. For this reason, there are many characteristics it is hard to decipher some carved inscription on the surface of damaged outdoor cultural properties. Until now, Rubbed copy has been widely used to decode engraved inscription. A investigation for epigraph has been made by the rubbing that has resulted in a lower resolution from the viewpoints of extraction process and used materials. Rubbing's results are not satisfied in the damaged inscriptions which are weathered by natural environment and pollution for a long time and in the narrowed one. The main analysis presented in this paper is a cross section analysis method using 3d scanning technique for epigraph not read. Cross section analysis is a study on readability improvement method for ancient inscription of irregularity monument surface. Cross section analysis confirms information that separated the inscription information of monument and the ground information to read a ancient inscription and decode the inscription information. The proposed character identification method contributed to decoding an ancient inscription on Silla Monument in Jungseong-ri of Pohang.

• Computers and Concrete
• /
• v.8 no.1
• /
• pp.43-57
• /
• 2011

Force-deformation modelling of cracked reinforced concrete is essential for a displacement-based seismic assessment of structures and can be achieved by fibre-element analysis of the cross-section of the major lateral resisting elements. The non-linear moment curvature relationship obtained from fibre-element analysis takes into account the significant effects of axial pre-compression and contributions by the longitudinal reinforcement. Whilst some specialised analysis packages possess the capability of incorporating fibre-elements into the modelling (e.g., RESPONSE 2000), implementation of the analysis on EXCEL is illustrated in this paper. The outcome of the analysis is the moment-curvature relationship of the wall cross-section, curvature at yield and at damage control limit states specified by the user. Few software platforms can compete with EXCEL in terms of its transparencies, versatility and familiarity to the computer users. The program has the capability of handling arbitrary cross-sections that are without an axis of symmetry. Application of the program is illustrated with examples of typical cross-sections of structural walls. The calculated limiting curvature for the considered cross-sections were used to construct displacement profiles up the height of the wall for comparison with the seismically induced displacement demand.

• Communications for Statistical Applications and Methods
• /
• v.8 no.2
• /
• pp.443-452
• /
• 2001

The 2x3 cross-over design is proposed for the bioequivalence of two test drug formulations with a reference drug formulation. Oh et al.(1999) and Park et al.(1998) derived 3x2 cross-over design and discussed its benefits, since the 3x3 cross-over design may not be of practical design. We discuss the statistical issues for2x3 cross-over design and show its statistical properties. Bioequivalence problem in 2x3 cross-over design is considered statistically and an illustrated example is given.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.133-137
• /
• 1987

Polysiloxane SE-54 liquid phase was immobilized on the support surface as coated in thin film via in-situ cross-linking. The cross-linking between liquid molecules was initiated by dicumylperoxide. Among the supports investigated, only Chromosorb W provided the cross-linkable surface. The optimal in-situ cross-linking was achieved when Chromosorb W was coated with 5% (w/w) SE-54 and cross-linked with 1% (w/w) dicumylperoxide. The cross-linked support was useful for the trace analysis as well as for the trace enrichment.