• Journal of Biosystems Engineering
• /
• 제20권4호
• /
• pp.313-322
• /
• 1995

This study was conducted to find the design factors of spraying device of the boom sprayer for low volume application. Specific objectives of this study were 1) to select proper nozzles for broadcast spraying and row crop spraying by the nozzle spray characterisic experiment, and 2) to investigate the coverage characteristic of rice plant at the row crop spraying. The results of this study are summarized as follows. (1) From the tested results on the droplet diameter spectrum and spray pattern the standard flat-fan nozzle and drift guard nozzle were judged as appropriate for the broadcasting. Even flat-fan nozzle showed similar span values to standard flat-fan nozzles and drift guard nozzle : however, the nozzles were found to be inappropriate for broadcasting because of their spray pattern. Hollow cone nozzle showed relatively small span values and uniform spray pattern. (2) For the upper and lower sides of the rice plants, coverage rates of even flat-fan nozzles and hollow cone nozzles were maximum at the second row, but decreased rapidly after the third row. For the middle side of the rice plants, coverage rates of them were maximum at the first row, but decreased rapidly. When one nozzle was tested, C.V. values were in the range of 90~160% and 60~160% on entire heights of rice plant for even flat-fan nozzles and hollow cone nozzles respectively. C.V. values at other parts were poor. Spray coverage rate at the middle part was improved by overlapping the nozzles whereas there was little difference on the upper and lower part of rice plants. (3) For spraying lower part of rice plant between rows, even flat-fan nozzles and hollow cone nozzle were judged as appropriate, but in order to ensure the uniform coverage, distance between nozzles, recommended to be less than 90cm.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.285-290
• /
• 1998

Growth information of crops is essential for efficient control of greenhouse environment. However, a few non-invasive and continuous monitoring methods of crop growth has been developed. A computer vision system with a CCD camera and a frame grabber was developed to conduct non-destructive and intact plant growth analyses. The developed system was evaluated by conducting the growth analysis of lettuce. A linear model that explains the relationship between the relative crop coverage by the crop canopy and dry weight of a lettuce was presented. It was shown that this measurement method could estimate the dry weight from the relative crop coverage by the crop canopy. The result also showed that there was a high correlation between the projected top leaf area and the dry weight of the lettuce.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.334-336
• /
• 2003

Satellite and airborne hyperspectral sensor images are suitable for investigating the vegetation state in agricultural land. However, image data obtained by an optical sensor inevitably includes mixels caused by high altitude observation. Therefore, mixel analysis method, which estimates both the pure spectra and the coverage of endmembers simultaneously, is required in order to distinguish the qualitative spectral changes due to the chlorophyll quantity or crop variety, from the quantitative coverage change. In this paper, we apply our agricultural independent component analysis (ICA) model to an airborne hyperspectral sensor image, which includes noise and fluctuation of coverage, and estimate pure spectra and the mixture ratio of crop and soil in agricultural land simultaneously.

• 한국토양비료학회지
• /
• 제40권6호
• /
• pp.465-470
• /
• 2007

고랭지 경사밭에서 동반작물의 토양보전효과를 알아보기 위하여 고랭지 배추재배지에 지면패랭이, 긴병꽃풀 등 지피성 동반작물을 배추와 동반정식, 상시피복정식, 배추단독정식 시, 이들에 의한 피복률 변화, 토양 및 양분유실, 잡초억제 정도를 조사하였다. 지면패랭이의 상시피복구는 배추 정식기에서 종료기까지 100%의 피복률을 보였다. 긴병꽃풀은 정식초기 10%의 피복률이 수확기에는 100%에 이르렀으나, 배추와 동시에 정식한 피복구는 약 60%로 배추에 의한 피복률을 크게 상회하지 못하였다. 토양 및 질소유실이 무지피에서는 $20.8ton\;ha^{-1}$, $2.1kg\;NO_3{^-}-N\;ha^{-1}$, 배추단독으로 재배되거나 배추와 동시에 정식된 동반정식처리구에서는 $8.9{\sim}10.5ton\;ha^{-1}$, $1.5{\sim}2.2kg\;NO_3{^-}-N\;ha^{-1}$이었으나 긴병꽃풀이나 지면패랭이 상시피복구에서는 $0.1{\sim}0.2ton\;ha^{-1}$, $0.2{\sim}0.4kg\;NO_3{^-}-N\;ha^{-1}$로 낮아져, 지피작물에 의한 토양 및 비료 유실저감 효과가 매우 높았다. 이들의 피복은 잡초발생을 약 70% 억제하였다. 따라서 지면패랭이의 이용은 잡초발생억제는 물론 토양유실 및 비료유실을 줄일 수 있어 고랭지배추 재배지에서 환경보전에 크게 기여할 것으로 판단된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.129-129
• /
• 2022

The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.

• 한국작물학회지
• /
• 제66권4호
• /
• pp.435-442
• /
• 2021

1. 이탈리안 라이그라스의 코팅종자 제조시 접착제는 PVA가 유리하였으며 2~5% 내에서는 큰 차이가 없어 경제적으로 판단했을 경우에는 2%가 유리하다. 2. 탄산칼슘+탈크를 활용하여 종자 코팅하는 것이 천립중, 리터중이 높고 매끄럽게 성형되어 유리하였으며, pH와 EC가타 피복제에 비해 낮아 화학적으로 안전하였으며, 발아세, 평균발아속도가 높아 타 피복제에 비해 우수하였다. 3. 탄산칼슘+탈크를 무게에 따라 코팅하여 비교했을 시, 대조구에 비해 발아율, 발아세, 평균 발아 속도에서 초장 차이를 보이지 않았으며, 강도는 피복 재료와 종자와의 무게 비율 1:1과 그 이상 무게를 추가할 경우에는 차이를 보이지 않아 경제성을 고려하였을 때 1:1이 가장 유리하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.57-57
• /
• 2017

Chrysanthemum is one of the most important floral crop in Korea produced about 7 billion dollars (1 billion for pot and 6 billion for cutting) in 2013. However, it is difficult to breed and to do genetic study because 1) it is highly self-incompatible, 2) it is outcrossing crop having heterozygotes, and 3) commercial cultvars are hexaploid (2n = 6x = 54). Although low-density genetic map and QTL study were reported, it is not enough to apply for the marker assisted selection and other genetic studies. Therefore, we are trying to make high-density genetic mapping using GBS with about 100 $F_1s$ of C. boreale that is oHohhfd diploid (2n = 2x = 18, about 2.8Gb) instead of commercial culitvars. Since Chrysanthemum is outcrossing, two-way pseudo-testcross model would be used to construct genetic map. Also, genotype-by-sequencing (GBS) would be utilized to generate sufficient number of markers and to maximize genomic representation in a cost effective manner. Those completed sequences would be analyzed with TASSEL-GBS pipeline. In order to reduce sequence error, only first 64 sequences, which have almost zero percent error, would be incorporated in the pipeline for the analysis. In addition, to reduce errors that is common in heterozygotes crops caused by low coverage, two rare cutters (NsiI and MseI) were used to increase sequence depth. Maskov algorithm would also used to deal with missing data. Further, sparsely placed markers on the physical map would be used as anchors to overcome problems caused by low coverage. For this purpose, were generated from transcriptome of Chrysanthemum using MISA program. Among those, 10 simple sequence repeat (SSR) markers, which are evenly distributed along each chromosome and polymorphic between two parents, would be selected.

• 한국작물학회지
• /
• 제54권3호
• /
• pp.265-269
• /
• 2009

자운영답 입모부족시 생초량 증진방법을 구명하고자 실시한 시험결과는 다음과 같다. 1. 3월초에 Sethoxydim 유제로 둑새풀을 일찍 방제시 방제가가 84%로 높았으나 처리시기가 늦을 수록 방제효과는 낮았다. 2. 둑새풀 방제후(처리 76일 후) 자운영 입모수는 처리전과 비슷하였고 가을철 재입모수도 처리전에 비해 $2.2{\sim}2.6$배가 증가 하였으나 무처리는 둑새풀과 경합에 의해 자운영 입모수가 감소하였다. 3. 둑새풀 방제후 자운영 건물중은 자운영 피복도가 20%일때 63%, 50% 피복도일 때 164%가 증가하였고 질소함량으로는 12.3 kg, 16.4 kg/10a으로 표준질소시비량 9 kg/10a 보다 높았다. 4. 둑새풀 방제에 따른 쌀 수량은 기계이앙 및 부분경운 이앙 모두 무방제와 비슷하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.58-58
• /
• 2017

The advent of next generation sequencing technology has elicited plenty of sequencing data available in agriculturally relevant plant species. For most crop species, it is too expensive to obtain the whole genome sequence data with sufficient coverage. Thus, many approaches have been developed to bring down the cost of NGS. Genotyping-by-sequencing (GBS) is a cost-effective genotyping method for complex genetic populations. GBS can be used for the analysis of genomic selection (GS), genome-wide association study (GWAS) and constructing haplotype and genetic linkage maps in a variety of plant species. For efficiently dealing with plant GBS data, the TASSEL-GBS pipeline is one of the most popular choices for many researchers. TASSEL-GBS is JAVA based a software package to obtain genotyping data from raw GBS sequences. Here, we describe application of GBS and bioinformatics pipeline of TASSEL-GBS for analyzing plant genetics data.

• 한국약용작물학회지
• /
• 제15권5호
• /
• pp.362-366
• /
• 2007

This study was conducted to evaluate the status of habitat distribution, environmental characteristics and plant species growing with Lonicera japonica in its habitats. In the distribution of plant coverage below 30%, it was 84.6% in the inland area and 80.7% in the seashore area. There was similar coverage in both inland and seashore areas. But the average relative coverage in the seashore area was 26.1%, which is a little higher than that of the inland area (22.5%). In the habitats, both inland and seashore areas showed a high distribution ratio below 10 degrees. But among them, inland areas showed a high distribution ratio (62.4%) below 10 degrees, which was about twice as much as the seashore areas (32.2%). Habitat distribution was most often found on the southern slopes in both inland and seashore areas. The average soil pH of Lonicera japonica habitat was 5.2 in the inland areas and 6.9 in the seashore areas. Also, the seashore areas showed little content of $P_2O_5$, but high content of K, Mg, Na on the other hand compared to the inland area. Miscanthus sinensis was the highest importance value (16.4) among plants growing with Lonicera japonica in their habitats in both inland and seashore areas. But in the inland areas, Artemisia princeps showed the highest importance value, and Miscanthus sinensis was the highest in the seashore areas.