This study was conducted to find the design factors of spraying device of the boom sprayer for low volume application. Specific objectives of this study were 1) to select proper nozzles for broadcast spraying and row crop spraying by the nozzle spray characterisic experiment, and 2) to investigate the coverage characteristic of rice plant at the row crop spraying. The results of this study are summarized as follows. (1) From the tested results on the droplet diameter spectrum and spray pattern the standard flat-fan nozzle and drift guard nozzle were judged as appropriate for the broadcasting. Even flat-fan nozzle showed similar span values to standard flat-fan nozzles and drift guard nozzle : however, the nozzles were found to be inappropriate for broadcasting because of their spray pattern. Hollow cone nozzle showed relatively small span values and uniform spray pattern. (2) For the upper and lower sides of the rice plants, coverage rates of even flat-fan nozzles and hollow cone nozzles were maximum at the second row, but decreased rapidly after the third row. For the middle side of the rice plants, coverage rates of them were maximum at the first row, but decreased rapidly. When one nozzle was tested, C.V. values were in the range of 90~160% and 60~160% on entire heights of rice plant for even flat-fan nozzles and hollow cone nozzles respectively. C.V. values at other parts were poor. Spray coverage rate at the middle part was improved by overlapping the nozzles whereas there was little difference on the upper and lower part of rice plants. (3) For spraying lower part of rice plant between rows, even flat-fan nozzles and hollow cone nozzle were judged as appropriate, but in order to ensure the uniform coverage, distance between nozzles, recommended to be less than 90cm.
Growth information of crops is essential for efficient control of greenhouse environment. However, a few non-invasive and continuous monitoring methods of crop growth has been developed. A computer vision system with a CCD camera and a frame grabber was developed to conduct non-destructive and intact plant growth analyses. The developed system was evaluated by conducting the growth analysis of lettuce. A linear model that explains the relationship between the relative crop coverage by the crop canopy and dry weight of a lettuce was presented. It was shown that this measurement method could estimate the dry weight from the relative crop coverage by the crop canopy. The result also showed that there was a high correlation between the projected top leaf area and the dry weight of the lettuce.
Satellite and airborne hyperspectral sensor images are suitable for investigating the vegetation state in agricultural land. However, image data obtained by an optical sensor inevitably includes mixels caused by high altitude observation. Therefore, mixel analysis method, which estimates both the pure spectra and the coverage of endmembers simultaneously, is required in order to distinguish the qualitative spectral changes due to the chlorophyll quantity or crop variety, from the quantitative coverage change. In this paper, we apply our agricultural independent component analysis (ICA) model to an airborne hyperspectral sensor image, which includes noise and fluctuation of coverage, and estimate pure spectra and the mixture ratio of crop and soil in agricultural land simultaneously.
고랭지 경사밭에서 동반작물의 토양보전효과를 알아보기 위하여 고랭지 배추재배지에 지면패랭이, 긴병꽃풀 등 지피성 동반작물을 배추와 동반정식, 상시피복정식, 배추단독정식 시, 이들에 의한 피복률 변화, 토양 및 양분유실, 잡초억제 정도를 조사하였다. 지면패랭이의 상시피복구는 배추 정식기에서 종료기까지 100%의 피복률을 보였다. 긴병꽃풀은 정식초기 10%의 피복률이 수확기에는 100%에 이르렀으나, 배추와 동시에 정식한 피복구는 약 60%로 배추에 의한 피복률을 크게 상회하지 못하였다. 토양 및 질소유실이 무지피에서는 $20.8ton\;ha^{-1}$, $2.1kg\;NO_3{^-}-N\;ha^{-1}$, 배추단독으로 재배되거나 배추와 동시에 정식된 동반정식처리구에서는 $8.9{\sim}10.5ton\;ha^{-1}$, $1.5{\sim}2.2kg\;NO_3{^-}-N\;ha^{-1}$이었으나 긴병꽃풀이나 지면패랭이 상시피복구에서는 $0.1{\sim}0.2ton\;ha^{-1}$, $0.2{\sim}0.4kg\;NO_3{^-}-N\;ha^{-1}$로 낮아져, 지피작물에 의한 토양 및 비료 유실저감 효과가 매우 높았다. 이들의 피복은 잡초발생을 약 70% 억제하였다. 따라서 지면패랭이의 이용은 잡초발생억제는 물론 토양유실 및 비료유실을 줄일 수 있어 고랭지배추 재배지에서 환경보전에 크게 기여할 것으로 판단된다.
The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.
1. 이탈리안 라이그라스의 코팅종자 제조시 접착제는 PVA가 유리하였으며 2~5% 내에서는 큰 차이가 없어 경제적으로 판단했을 경우에는 2%가 유리하다. 2. 탄산칼슘+탈크를 활용하여 종자 코팅하는 것이 천립중, 리터중이 높고 매끄럽게 성형되어 유리하였으며, pH와 EC가타 피복제에 비해 낮아 화학적으로 안전하였으며, 발아세, 평균발아속도가 높아 타 피복제에 비해 우수하였다. 3. 탄산칼슘+탈크를 무게에 따라 코팅하여 비교했을 시, 대조구에 비해 발아율, 발아세, 평균 발아 속도에서 초장 차이를 보이지 않았으며, 강도는 피복 재료와 종자와의 무게 비율 1:1과 그 이상 무게를 추가할 경우에는 차이를 보이지 않아 경제성을 고려하였을 때 1:1이 가장 유리하였다.
한국작물학회 2017년도 9th Asian Crop Science Association conference
/
pp.57-57
/
2017
Chrysanthemum is one of the most important floral crop in Korea produced about 7 billion dollars (1 billion for pot and 6 billion for cutting) in 2013. However, it is difficult to breed and to do genetic study because 1) it is highly self-incompatible, 2) it is outcrossing crop having heterozygotes, and 3) commercial cultvars are hexaploid (2n = 6x = 54). Although low-density genetic map and QTL study were reported, it is not enough to apply for the marker assisted selection and other genetic studies. Therefore, we are trying to make high-density genetic mapping using GBS with about 100 $F_1s$ of C. boreale that is oHohhfd diploid (2n = 2x = 18, about 2.8Gb) instead of commercial culitvars. Since Chrysanthemum is outcrossing, two-way pseudo-testcross model would be used to construct genetic map. Also, genotype-by-sequencing (GBS) would be utilized to generate sufficient number of markers and to maximize genomic representation in a cost effective manner. Those completed sequences would be analyzed with TASSEL-GBS pipeline. In order to reduce sequence error, only first 64 sequences, which have almost zero percent error, would be incorporated in the pipeline for the analysis. In addition, to reduce errors that is common in heterozygotes crops caused by low coverage, two rare cutters (NsiI and MseI) were used to increase sequence depth. Maskov algorithm would also used to deal with missing data. Further, sparsely placed markers on the physical map would be used as anchors to overcome problems caused by low coverage. For this purpose, were generated from transcriptome of Chrysanthemum using MISA program. Among those, 10 simple sequence repeat (SSR) markers, which are evenly distributed along each chromosome and polymorphic between two parents, would be selected.
한국작물학회 2017년도 9th Asian Crop Science Association conference
/
pp.58-58
/
2017
The advent of next generation sequencing technology has elicited plenty of sequencing data available in agriculturally relevant plant species. For most crop species, it is too expensive to obtain the whole genome sequence data with sufficient coverage. Thus, many approaches have been developed to bring down the cost of NGS. Genotyping-by-sequencing (GBS) is a cost-effective genotyping method for complex genetic populations. GBS can be used for the analysis of genomic selection (GS), genome-wide association study (GWAS) and constructing haplotype and genetic linkage maps in a variety of plant species. For efficiently dealing with plant GBS data, the TASSEL-GBS pipeline is one of the most popular choices for many researchers. TASSEL-GBS is JAVA based a software package to obtain genotyping data from raw GBS sequences. Here, we describe application of GBS and bioinformatics pipeline of TASSEL-GBS for analyzing plant genetics data.
Kim, Seong-Min;Shin, Dong-Il;Yoon, Seong-Tak;Song, Hong-Seon
한국약용작물학회지
/
제15권5호
/
pp.362-366
/
2007
This study was conducted to evaluate the status of habitat distribution, environmental characteristics and plant species growing with Lonicera japonica in its habitats. In the distribution of plant coverage below 30%, it was 84.6% in the inland area and 80.7% in the seashore area. There was similar coverage in both inland and seashore areas. But the average relative coverage in the seashore area was 26.1%, which is a little higher than that of the inland area (22.5%). In the habitats, both inland and seashore areas showed a high distribution ratio below 10 degrees. But among them, inland areas showed a high distribution ratio (62.4%) below 10 degrees, which was about twice as much as the seashore areas (32.2%). Habitat distribution was most often found on the southern slopes in both inland and seashore areas. The average soil pH of Lonicera japonica habitat was 5.2 in the inland areas and 6.9 in the seashore areas. Also, the seashore areas showed little content of $P_2O_5$, but high content of K, Mg, Na on the other hand compared to the inland area. Miscanthus sinensis was the highest importance value (16.4) among plants growing with Lonicera japonica in their habitats in both inland and seashore areas. But in the inland areas, Artemisia princeps showed the highest importance value, and Miscanthus sinensis was the highest in the seashore areas.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.