• International Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.17-27
• /
• 2008

Black garments can lose color, image, and be the main cause of color staining when washed with other laundry that can cause color contamination from interaction with other garments. To know the fiber-based dye fastness for colored garments, 4-5 pieces of various fibers of different fabrics were selected; cotton, linen, wool, silk, rayon, acetate, polyester, and nylon. To determine the colorfastness to washing and crocking, the black fabrics were washed with alkali and neutral detergents under the Laund-O-Meter method under the Crockmeter method. In an alkali detergent laundering conditions, most colored samples did not undergo color or light fastness. However, most of the stained fabrics slightly changed in K/S values while other samples underwent severe changes. With neutral detergent laundering, sample fabrics underwent less shrinking, and had less naps. The stained fabrics also underwent less change in K/S values. With time-repeatedly-washing the original sample went through colorfastness to lose color. In crocking fastness, most samples produced good to excellent results under dry conditions but produced relatively low crocking fastness under wet conditions. Natural fibers especially showed lower crocking fastness than artificial fibers. In conclusion, garments of the same color should be laundered together. The black garments that are washed using neutral detergents can decrease the amount of damage from color change. While it is the responsibility of garment producers to provide appropriate quality indications they should also provide adequate instructions for consumers to understand and appropriately cope with the quality indications in order to contribute to establishing a correct laundering method.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.28-36
• /
• 2006

The polyurethane prepolymers, which were previously synthesized from 2,4-toluene disocyanate(2,4-TDI) and polypropylene glycol(PPG), were chain extended by ethylene diamine or hydroxyl terminated polydimethylsiloxane(HTPMS) having hydroxy group at both ends of the chain, giving polyurethaneurea(PU) and polyurethane containing HTPMS segment(SiPU), respectively. In thermal gravimetric analysis, PU was almost completely degraded at $500^{circ}$ but SiPU showed about 11% residue at the same temperature. Suspension of SiPU and pigment showed more good compatibility than that of PU and pigment. The crocking fastness, migration fastness and solvent wicking were enhanced to 4.5 grades, 4 grades and 4 grades, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.469-476
• /
• 1998

The natural dyestuff(chestnut dye) was manufactured from chestnut hulls by boiling in 0.5 NaOH solution and powdering in freeze dryer. To investigate the dyeability and color fastness, cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured chestnut dye. Dyeing operation was carried in acidic dyebath of pH 4-5 because the chestnut dye is anionic. Dyeabilities on wool, silk and nylon fabrics were good, especially nylon fabrics were dyed deeper than others. But dyeability on cotton fabrics was not good. All the dyed fabrics showed excellent color fastness to crocking. Color fastness to laupdering of them were moderate to good. Also light fastness of them were moderate to good except nylon. The light fastness of dyed nylon fabrics was as poor as grade 1. But they could be improved to grade 4 by aftertreatment with gallic acid.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1011-1019
• /
• 1998

The natural dyestuff(squid ink) was manufactured from squid ink by boiling in 0.1% NaOH solution and powdering in freeze dryer. Cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured squid ink to investigate the dyeability and color fastness. Dyeing was operated in acidic dyebath of pH 4 because the squid ink is anionic. Dyeabilities on wool, silk and nylon fabrics were good, especially silk fabrics were dyed deeper than others because of being amine group. But dyeability on cotton fabrics was low and developed with chitosan treatment. All the dyed fabrics showed excellent in color fastness to crocking and laundering. Also light fastness of them were excellent except nylon. The light fastness of dyed-nylon fabrics was as poor as grade 1, but they could be improved to grade 4 by aftertreatment with gallicacid. Useing the natural dyestuff-squid ink powder, we could execute whenever we want to dye fabrics in the adequate concentration. Dyeabilities were developed according to repeating times of dyeing and the increased dye concentration. We could recycle the wasting sources.

• Journal of the Korean Home Economics Association
• /
• v.38 no.11
• /
• pp.127-135
• /
• 2000

The natural dyestuff, grape skin dye was manufactured from grape skin by boiling in 0.1% HCI solution, eliminating the sugar and powdering in freeze dryer. Cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured grape skin dye to investigate the dyeability and color fastness. Dyeing was operated in acidic dyebath of pH 4 because the grape skin is anionic. The color of dyed fabrics were affected on temperature of dyeing solution. Under 80$\^{C}$, the color of dyed fabrics were red or violet, but changed to brown in laundering. Above 100$\^{C}$, the color were brown and safe in laundering. Dyeabilities on wool, silk, and nylon fabrics were good, especially silk fabrics were dyed deeper than others. Dyeability was developed with concenturation of dyeing solution. All the dyed fabrics were excellent in color fastness to crocking and laundering. Light fastness was low to moderate. The light fastness of dyed nylon fabrics were as poor as grade 1, but they could be improved to grade 3∼4 by aftertreatment with gallic acid.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.133-144
• /
• 1990

The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.8-14
• /
• 2004

The purpose of this study was to investigate dyeing properties and antibacterial activities of cotton and silk fabrics treated with Ginkgo biloba leaf extracted with three kinds of aqueous solvents: distilled water, electrolytic reduction water and electrolytic oxidation water. The optimum dyeing condition of Ginkgo biloba leaf was 120 min at 8$0^{\circ}C$. Electrolytic reduction water had the highest dyeability to both cotton and silk compared with electrolytic oxidation water and distilled water. A color of extract by distilled water and electrolytic oxidation water showed yellowish Yellow Red, extract by electrolytic reduction water showed reddish Yellow Red. Irrespective of kinds of extraction solvents, appropriate acidity of medium was pH 9∼11 and pH 3 for cotton and silk fabrics, respectively. Colorfastness to laundering and Light fastness showed generally low but crocking fastness was excellent. Antibacterial activities of the treated fabrics above were 99.9%.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.79-89
• /
• 1998

This study was carried out the effect of stability and color extract for it's condition in the curcuma L.. dyeing. The stability is to investigate the absorbance of the curcumin, one of the major yellow pigments and the stability regarding the effect of light, oxygen temperature and pH. The dyeing condition is compared the effect of mordanting condition and the best way to extract pigment and analysed through the color-fastness rating, color-difference value test. The main results obtained are summarized as follows ; 1.The best and proper solvent to extrect curcumin pigment was a ethanol and a distilled water. 2. The light effect indicated that the absorbances of solution in absence of ligh was more stable. 3. The oxygen(O2) effect to curcumin show-ed that the condition in the absence of O2 was more stable than that in presence of O2 4. The temperature showed that the absorbnace was best stable in4$^{\circ}C$ and less changed at $25^{\circ}C$ 5. The curcumin-etanol solution was stable in pH 2~4. 6. Generally color-fastness rating to silk, wool and cotton indicated that crocking C.F. and perspiration C.F. were more than 3rd grade and dry cleaning C.F. was more than 4th grade. But light color-fastness and washing color-fastness were very poor. 7. To make good color fastness, the mordan-ting treated group and the pre-mordant conditions were more effective than others 8. When compared with color-difference value test indicated that the silk was looks like more reddish and bluish color and than the wool and cotton were greenish and bluish. As a mordant, A(C2H4OH(COOH3) and D(K2Cr2O7)were more effective to make green-ish color in the silk and the reddish color was abtained by B(Al.K(SO4)2.12H2O) and C(FeSO4.7H2O).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.517-523
• /
• 2003

We studied the physical properties of silk fabrics after degumming, the dyeability and the color fastness of silk fabrics after degumming and sericin fixing. As the sericin was removed from silk fabrics, the rate of weight loss increased and both the abrasion resistance and the drape coefficient decreased. This means that the amount of the sericin remained in silk fabrics significantly affects the physical properties of silk fabrics. On the surface and the cross-section of silk fabrics, the silk fibers enclosed by the sericin seemed to be in a lump shape. Each fibroin strand, however, got scattered, as the process of degumming went through. The dyeability of silk fabrics degummed decreased at between 20$^{\circ}C$∼80$^{\circ}C$ the dyeing temperature, on the other hand, it significantly increased over 80$^{\circ}C$. The dyeability of the sericin-fixed silk fabrics was lower than that of the non-serin-fixed silk fabrics, to a little extent. The colorfastness of crocking in the dyed-silk fabrics was a little low and that of the sweat was much lower in a basic sweat. Especially, the colorfastness of the partially degummed silk fabrics was low, because the sericin was not stable in the condition of sweat. Therefore, the process of sericin fixing is essentially required, for the partially degummed silk fabrics and the process of degumming itself.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.103-112
• /
• 2007

The purpose of this study was to investgate dyeing, moradnting properties and colorfastness activities of silk, polyamide, acetate treated black soybean extracts. The color of extract by buffer solution (pH=1) red, but the higher pH of extracted black soybean solution the paler of color strength. Black soybean extracts was approved anthocyanin of 3type(Delphinidin3-glucoside, Cyanidin 3-glucoside, Petunidin 3-glucoside) by chemiclal analysis. This anthocynin, in acid condition, is oxinium structure (red color, soluable) but, in alkali condition quinoid structure(dark brown, in soluable). The optimum dyeing condition of black soybean anthocynin was 10min at $30^{\circ}C$, pH -1. Colorfastness to washing and light showed generally low but crocking fastness was excellent.