• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.755-761
• /
• 2015

Photocatalytic VOCs removal test in gas phase is generally performed by placing the light source on the outside due to maintaining a constant temperature inside the test chamber. The distance between light source and photocatalysts is importantin the VOC degradation test since the intensity of light is rapidly decreased as the distance farther. Especially, for the choice of light source as UVLED, this issue is more critical because UVLED light source emits lots of heat and it is hard to measure the exact concentration of VOCs due to changed temperature in the test chamber. In this study, we modified VOC removal test chamber base on the protocol of air cleaner test and evaluated the efficiency of photocatalystunder UVLED irradiation. Photocatalystsof two different samples (commercial $TiO_2$ and the synthesized vanadium doped $TiO_2$) weretested for the p-xylene degradation in the closed chamber system and compared with each other in order to exclude any experimental uncertainties. During the VOC removal test, VOC concentrations were monitored and corrected at regular time intervals because the temperature in the chamber increases ${\sim}20^{\circ}C$ due tothe heat of UVLED. The results showed that theconversion ratio of p-xylene has 40~43% difference before and after the temperature correction. Based on those results, we conclude that the VOC concentration correction must be required for the VOC removal test in a closed chamber system under UVLED light source and obtained the corrected efficiencies of various photocatlysts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.24-25
• /
• 2006

SmBCO coated conductors were successfully fabricated using EDDC (Evaporation using Drum in Dual Chambers) deposition system that is a bath type co-evaporation system for fabrication of superconducting tape and divided into two chambers named evaporation chamber and reaction chamber. To obtain long and high quality superconducting coated conductor, it is very important to secure the uniformity of all the deposition parameters m the deposition system such as deposition temperature, oxygen partial pressure, compositional ratios and so on. Therefore, we investigated the distribution of the parameters along the axis of the drum m EDDC on which tapes were wound helically. When the temperature on the middle point of deposition zone was $700^{\circ}C$, that on the edge of deposition zone was $675^{\circ}C$. When the thickness of SmBCO layer on the middle point of deposition zone was 1063 nm, that on the edge of deposition zone was 899 nm. The partial pressure of oxygen was 5 mTorr in the reaction chamber while that was $7{\times}10^{-5}$Torr in the evaporation chamber. The composition ratio of Sm:Ba:Cu, that was measured by EDX, was very uniform along the axis of the drum. Under these deposition conditions, critical current distribution along the drum axis was 175 A/cm, 190A/cm, 217.5 A/cm, 182.5 A/cm, 175 A/cm with the interval of 9 cm between samples. It means that the EDDC system has the potential of fabricating (100m, 200A) class coated conductor.

• Korean Journal of Veterinary Service
• /
• v.25 no.2
• /
• pp.117-126
• /
• 2002

Contamination levels of pathogenic microorganisms in 145 cases of beef, which were distributed in Gwangju province, had been investigated in each distributed stage and also monitored by general bacterial count and E coli count index. General bacterial count of beef from the slaughterhouse was 10$^4$cfu/g less than the level of promotion(10 cfu/$\textrm{cm}^2$) and E coli count index was also under the level of 10$^2$cfu/$\textrm{cm}^2$ recommended level of the ministry of agriculture and forestry. Pathogenic microorganisms were detected from 23.2% of samples in the consumption stage, 12.5% in the slaughtering stage and 5.6% in the transporting and processing stage. Staphylococcus aureus was isolated in the largest number and its ratio was 9.0%, listeria monocytogenes 5.5% and salmonella spp 1.4%. There were no samples that bacteria had been detected dually. E coli O157:H7 and campylobacter jejuni were not isolated. In raw and chilled beef, isolation rate of pathogenic microorganisms were 13.3% and 16.5% each. Especially in raw beef, L monocytogenes was. isolated in 3 samples among 30 cases (10%) and S aureus in one sample (3.3%). According to a scale of meat store, isolation rates of pathogenic microorganisms were different. It was 28.6% in the small-scale meat store and 16.7% in the large-scale meat store each. Four cases (16.7%) of S aureus were isolated in the large-scale meat store and seven cases (20.0%) of L monocytogenes and 2 cases (5.7%) of salmonella spp were isolated in the small-scale meat store. S aureus was isolated in two places among 10 feeding facilities of the elementary school. This result shows that the sanitation of elementary school feeding facilities is so poor and more careful policy consideration is needed. Eleven strains of S aureus isolated showed ${\beta}$-hemolysis on blood agar, 1 strain ${\alpha}$-hemolysis, and 1 strain ${\gamma}$-hemolysis. Isolated strains of L monocytogenes were reconfirmed in 560 bp by PCR. Conclusively, these results show that the sanitary condition in the stages of slaughtering, transportation-processing and consumption influences the degree of pathogenic microorganisms contamination in beef severely It is necessary to apply thoroughly hazard analysis critical control point in a process of beef distribution and also to develop rapid test methods for microorganism diagnosis. This effort is very important for the supply of safe and clean meat from farm to table and helpful for the improvement of public health.

• Journal of Chest Surgery
• /
• v.30 no.7
• /
• pp.713-718
• /
• 1997

Fracture of the sternum has been considered as a serious injury and also associated with major complications such as myocardial, major thoracic vascular, and spinal injury. Retrospective datas from blunt trauma victims admitted to our hospital were analyzed to determine significance of sternal fractures and possible associated injures. 101 sternal fractures by blunt trauma were admitted from january, 1986 to december, 1995. Frequency was about 3.51 olo of the nonpenetrating chest trauma. The ratio of male to female was 1.82 versus 1. Most common cause in the stemal fracture was high decelerating injury(73 cases). Most common fracture site was sternal body(75 cases). Average days of adm ssion were 26 days. Abnormal ECG findings were sinus bradycardia(Teases), complete or incomplete RBBB(6 cases), sinus tachycardia(4 cases), specific S-T change(3 cases), 1st degree A-V block(2 cases), LVH(1 case), PVC(1 case), and Low voltage(1 case). CPK-MB was increased about 32.Lolo of sternal fractures. Except of expired 2 patients, patients were treated with conservative treatment(94 cases) and open reductions & steel wire fixations(5 cases). Complication after operation was wound infection(1 case). Causes of death were 1 hypovolemia and 1 acute respiratory distress syndrome. In conclusion, although sternal fracture is less frequent, and mostly treats with conservative treatment, it shoed be carefully observed because of critical associated injuries.

• Journal of Trauma and Injury
• /
• v.23 no.1
• /
• pp.6-15
• /
• 2010

Purpose: Trauma is one of the leading causes of death, especially among young people. Life-threatening conditions are very common in multiple-traumatized patients due to concurrent multi-organ injuries. Treating such severely injured patients is time critical. However, in Korea, the transfer of severely injured patients is not uncommon due to the lack of a mature trauma care system. In developed countries, the preventable trauma death rate is very low, but the rate is still very high in Korea. This study's objective was to demonstrate the current serious state in which severely injured patients have to be transferred from a Regional Emergency Medical Center even though it actually serves as a trauma center. Methods: Ajou University Medical Center is a tertiary hospital that serves as a trauma center in Gyeonggido. The medical records at Ajou University Medical Center for a 1-year period from January 1, 2008, to December 31, 2008, were retrospectively reviewed. A severely injured patient was defined as a patient who showed more than 15 point on the ISS (injury severity score) scale. We investigated the clinical characteristics of such patients and the causes of transfer. Results: Out of 81,718 patients who visited the Regional Emergency Medical Center, 19,731 (24.1%) were injured patients. Among them, 108 severely-injured patients were transferred from one Regional Emergency Medical Center to other hospitals. The male-to-female ratio was about 3.5:1, and the mean ISS was 23.08. The most common mechanism of injury was traffic accidents (41.7%). A major cause of transfer was the shortage of intensive care units (44.4%); another was for emergent operation (27.8%). Most of the hospitals that received the severely-injured patients were secondary hospitals (86.1%). Conclusion: Although the Regional Emergency Medical Center played a role as a trauma center, actually, severely-injured patients had to be transferred to other hospitals for several reasons. Most reasons were related with the deficiencies in the trauma care system. If a mature trauma care system is well-organized, the numbers of transfer of severely injured patients will be reduced significantly.

• Journal of Environmental Science International
• /
• v.20 no.1
• /
• pp.137-146
• /
• 2011

In this research, food waste source reduction model for apartment was investigated. In spite of prohibition of direct landfill of food waste and continuous efforts made by government and local government, food waste production increases steadily. Recycling ratio of the food waste increases every year, but its products have many problems like low quality, stability, salt, odor etc. Household occupies 63.3% of whole food waste production and this is subject to be a key factor to control food waste. We surveyed S apartment in Kwangju city as a model case, in which administrative office and women's association adopted clean plate eating, separation of raw food waste and earth worm composting as a series of method for source reduction and recycling inside the apartment. With the help of residents' participation and practice, food waste production decreased 15.6% from 0.31 g/capita/day in 2007 to 0.26 g/capita/day in 2009 (domestic average 0.30 g/capita/day). Separation of raw food waste and its composting using earth worm were very effective, and were subject to resolve the problems of present food waste treatment technologies. And earth worm composting was very useful in environmental, economical, societal and educational aspects. Instead of economical incentive, educational programs about food value, environmental problem and critical method for food waste separation were more effective for promotion of source reduction. From the analyses on the process and success factors in this model, we could conclude that leader's role was one of the key factors for the settlement of source reduction, and that was to understand the seriousness of the food waste and to seek solution, to test techniques, and to practice by oneself. Furthermore, networking and collaboration among residents, local government, NGO and local press promoted residents' participation, and it was through various education and investigation. Finally, source reduction and self recycling model of food waste in the apartment, that applies separating raw food waste and earth worm composting based on the collaboration among residents, local government, NGO, and local press, should be disseminated, and environmental policy also should be changed to make it possible.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.299-308
• /
• 2009

We manufactured PVA-derived hydrogels using a foam generation technique that has been widely used to prepare colloidal gas aphrons(CGA). These gels were differentiated to the conventional gels such as for medical or pharmaceutical applications, which have tiny pores and some crystalline structure. Rather these should be used in de-pollution devices or adhesion of cells or biomolecules. The crosslinkers used in this work were amino acid, organic acid, sugars and lipids(vitamins). The structures of the gels were observed in a scanned electron microscope. Amino acids gels showed remarkably higher swelling ratios probably because their typical functional groups help constructing a highly crosslinked network along with hydrogen bonds. Boric acid and starch would catalyze dehydration while structuring to result in much lower water content and accordingly high gel content, leading to less elastic, hard gels. Bulky materials such as ascorbic acid or starch produced, in general, large pores in the matrices and also nicotinamide, having large hydrophobic patches was likely to enlarge pore size of its gels as well since the hydrophobicity would expel water molecules, thus leading to reduced swelling. Hydrophilicity(or hydrophobicity), functional groups which are involved in the reaction or physical linkage, and bulkiness of crosslinkers were found to be more critical to gel's cross linking structure and its density than molecular weights that seemed to be closely related to pore sizes. Microscopic observation revealed that pores were more or less homogeneous and their average sizes were $20{\mu}m$ for methionine, $10-15{\mu}m$ for citric acid, $50-70{\mu}m$ for L-ascorbic acid, $30-40{\mu}m$ for nicotinamide, and $70-80{\mu}m$ for starch. Also a sensory test showed that amino acid and glucose gels were more elastic meanwhile acid and nicotinamide gels turned out to be brittle or non-elastic at their high concentrations. The elasticity of a gel was reasonably correlated with its water content or swelling ratio. In addition, the PVA gel including 20% ascorbic acid showed fair ability of cell adherence as 0.257mg/g-hydrogel and completely degraded phenanthrene(10 mM) in 240 h.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.579-588
• /
• 2006

In recent years, the availability of high-strength reinforcing and prestressing steels leads us to build economically and efficiently designed concrete structural members. One of critical problems faced to the structural engineers dealing with these types of structural member is controls of crack width that is used as a criterion for the serviceability in the limit state design. Especially, flexural cracking must be controlled to secure the structural safety and to improve the durability as well as serviceability of the load carving members. The proposed method utilizes the results of pure tension test in which tensile loads are applied both side of specimen, done by Ikki. The bond characteristics of deformed reinforcing bar under pure tension is considered by the area of concrete and rib area. The results of proposed method are compared with the test data and the results show that the proposed method can take into account the dimensions, variation of sectional properties, and direction of reinforcing and gives more accurate maximum bond stress and corresponding relative slip than the existing methods. the characteristics of bonding is considered by using dimensionless slip magnitude and effective reinforcement ratio. The validity of the proposed equation is verified by test experimental data.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.453-458
• /
• 2009

Recently, new methods to synthesize and process polymers without toxic organic solvents are needed in order to solve environmental problems. The use of supercritical carbon dioxide as a solvent for the polymer synthesis is attractive since it is non-toxic, non-flammable, naturally abundant, and the product may be easily separated from the solvent. In this study, we developed the method using super critical $CO_2$ to prepare P(MAA-co-EGMA) hydrogel nanoparticles as an intelligent drug delivery carrier. The effects of concentrations of PtBuMA-PEO as a dispersion stabilizer and AIBN as an initiator on the particle synthesis were investigated. When PtBuMA-PEO concentration increased, the particle size decreased. However, there was no significant difference in the particle size according to the AIBN concentration. There was a drastic change of the equilibrium weight swelling ratio of P(MAA-co-EGMA) hydrogel nanoparticles at a pH of around 5, which is the $pK_a$ of PMAA. At a pH below 5, the hydrogels were in a relatively collapsed state but at a pH higher than 5, the hydrogels swelled to a high degree. In release experiments using Rh-B as a model solute, the P(MAA-co-EGMA) hydrogel nanoparticles showed a pH-sensitive release behavior. At low pH(pH 4.0) a small amount of Rh-B was released while at high pH(pH 6.0) a relatively large amount of Rh-B was released from the hydrogels.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.301-309
• /
• 2001

Because many of patients seeking orthodontic treatment worry about the facial appearance and their chief motivation for orthodontic treatment is facial esthetics, it is critical to understand the influence of gender or culture on the evaluation of profile esthetics. The purpose of this study was to find out any influence of gender or culture on judging good facial profile. 4 different groups were asked to evaluate 133 facial profiles to test the influence of gender or culture on judging good facial profiles. Those 4 groups consisted of 10 Korean males, 10 Korean females, 10 Korean American males, and 10 Korean American females. 2 evaluation systems were introduced, absolute and relative. Soft tissues of selected good profile group were analyzed and statistic analysis was performed. Conclusions were as follows 1. Inter-evaluator difference for judging good facial profile was statistically significant, even if there was general agreement for the best profile among 40 raters. 2. Gender difference under the same cultural environment was not significant statistically. 3. The same ethnic groups with different cultural background showed statistically different preference on judging good Profile. 4. Good facial profile group had their own characteristics compared to remaining group in several soft tissue measurements which were vertical facial ratio, soft tissue facial convexity, and antero-posterior relative lip position.