• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.146-147
• /
• 2000

The electromagnetic wave scattering from active objects has only recently attracted attention.$^{(1).(3)}$ Theoretical studies have considered normal-incidence plane-wave interactions with active dielectric cylinders with the prediction of large enhancements in the scattered field for bound mode structures. According to the theory of the electromagnetic wave scattering from a dielectric cylinder, the eigenvector solutions are discrete and have both guided (non-radiative) and leaky (radiative) mode solutions. By using an anti-guiding (leaky) structure instead of a guided structure and scattering at oblique incident angles near critical angle, the scattering resonances predicted by theoretical studies were obtained for the first time. A fine-grained scan of the plane-wave incident angle a reveals the existence of discrete scattering resonances. The diameter and real part of the index of refraction determine the resonant conditions and the imaginary part of the refractive index has a threshold value to make mode up for its radiation loss. The cross coupling between transverse electric (TE) and transverse magnetic (TM) modes is clearly detected for both active and passive scattering as theoretically expected. (omitted)

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1301-1302
• /
• 2008

The resistivity of soils around ground electrodes is changed considerably according to the factors such as soil types, water contents, grain size, temperature and pressure. In this study, ionization characteristics of different soil types containing the same amount of water content due to the impulse voltages are investigated. In order to analyze soil ionization phenomena, critical electric field intensity for ionization and pre-ionization and post-ionization resistances are measured and discussed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.305-308
• /
• 2008

This paper presents characteristics of soil ionization when high currents such as lightning and switching surge currents are injected into a grounding rod. Soil ionization phenomena are investigated by using both voltage and current signals recorded by oscilloscope. As a result, a critical electric field intensity($E_C$) for ionization is decreased with reduction of grain size. The pre-ionization resistance($R_1$) and post-ionization resistance($R_2$) at the sand with fine grain size are getting lower with increasing current magnitude. Finally, the time to ionization($t_1$) and ionization current peak($t_2$) of fine grain size are significantly shorter than those of medium grain size.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.62-68
• /
• 2012

Cellulose was electrospun over water collector and the cellulose solution was prepared using N-methyl-morpholine N-oxide/water(nNMMO/$H_2O$). The morphology of electrospun cellulose was investigated by scanning electron microscopy (SEM). SEM images showed that the fiber formation depended on processing parameters such as solution concentration, applied electric field strength, solution feeding rate and temperature of water in coagulation bath. High concentration, low temperature of water bath, and low feeding rate were more favorable to obtain fiber morphology. All the variables affected on the fluidity of the cellulose solution and diffusion of NMMO. Low fluidity and fast diffuision of NMMO was critical for obtaining fiber morphology.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.203-206
• /
• 2006

Polyacrylonitrile (PAN) nanofibers, which are pH-sensitive and exhibit soft actuation as a linear actuator and artificial muscles, were prepared by electrospinning to investigate the effect of viscosity on the morphology of PAN fibers. Experimental results revealed that higher viscosity is critical for the formation of unbeaded nanofibers because surface tension is almost constant throughout the experiment. Uniform, smooth, and continuous fibers with diameters of about 700 nm were achieved for the 10 wt% PAN fibers at a flow rate of 0.5 mL/h and an electric field of 0.875 kV/cm.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.94-96
• /
• 1997

A mathematical model (hybrid arc model) for arc behaviour in an $SF_6$ puffer gas-blast circuit-breaker has been developed. It has adopted the advantages of integral method and differential method. The method has been applied to model puffer circuit breaker of Noeske et al and good agreement of critical RRRV(Ratio of Rise of Recovery Voltage) has been obtained. Axial or radial distributions of temperature, electric field and arc radius are also presented and analyzed.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.10-14
• /
• 2007

Analytical expression for breakdown voltages of InP diodes is induced by employing the effective ionization coefficient extracted from ionization coefficients for electron and hole in InP. The analytical results for breakdown voltage are compared with numerical and experimental results for the doping concentration, $N_D=6\times10^{14}cm^{-3}\sim3\times10^{17}cm^{-3}$. The analytical results show good agreement with the numerical data. Good fits with the experimental results are found for the breakdown voltages within 10% in error at each doping concentration.

• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.2
• /
• pp.39-44
• /
• 2003

Recent ULSI and multilevel structure trends in microelectronic devices minimize the line width down to a quarter micron and below, which results in the high current densities in thin film interconnections. Under high current densities, an EM(electromigration) induced failure becomes one of the critical problems in a microelectronic device. This study is to improve thin film interconnection materials by investigating the EM characteristics in PSG(phosphosilicate glass)/SiO$_2$ passivated Al-l%Si thin film interconnections. Straight line patterns, wide and narrow link type patterns, and meander type patterns, etc. were fabricated by a standard photholithography process. The main results are as follows. The current crowding effects result in the decrease of the lifetime in thin film interconnections. The electric field effects accelerate the decrease of lifetime in the double-layered thin film interconnections. The lifetime of interconnections also depends upon the current conditions of P.D.C.(pulsed direct current) frequencies applied at the same duty factor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.3
• /
• pp.247-253
• /
• 2000

We evaluated the electric properties of Bi-2223 jointed tapes processed by both resistive-and superconducting-joint methods. For resistive-joint. filler materials of wood metal Pb/Sn. In and silver paste were used whereas for superconductive-joint lap joint method was used. In the resistive joint tape. critical transport property(CCR) n-value and contact resistance were observed to be in the range of 10-85% 1-8,9. and 0.71x10$\^$-6/-0.13x10$\^$-6/Ω, respectively. depending on their filler materials. Specifically it is believed that the electrical properties of resistive joint tape are significantly related to the resistivity of filler materials. On the other hand the CCR of superconductin joint type was varied 55 to 85% with uniaxial pressure probably due to the irregular microstructure in the transition region.

• Advances in materials Research
• /
• v.11 no.4
• /
• pp.331-349
• /
• 2022

In the present work, we proposed an analytical study on buckling behavior of a sandwich plate with polymeric core integrated with piezo-electro-magnetic layers such as BaTiO3 and CoFe2O4 reinforced by graphene platelets (GPLs). The Halpin-Tsai micromechanics model is used to describe the properties of the polymeric core. The governing equations of equilibrium are obtained from first-order shear deformation theory (FSDT) and the Navier's method is employed to solve the equations. The results show the effect of different parameters such as thickness, length, weight fraction of GPLs, and also effect of electric and magnetic field on critical buckling load. The result of this study can be obtained in the aerospace industry and also in the design of sensors and actuators.