• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.201-204
• /
• 2008

The Sectional Design Model(AASHTO LRFD) is appropriate for the design of typical bridge girders, slabs, and other regions of components where the assumptions of traditional engineering beam theory are valid. The shear resistance of a concrete member may be separated into a component, $V_c$, that relies on tensile stresses in the concrete, $V_s$, that relies on tensile stresses in the transverse reinforcement. The expressions for $V_c$ and $V_s$ apply to both prestressed and nonprestressed section, with the terms ${\beta}$ and ${\theta}$ depending on the applied loading(M, V, N, and T) and the properties of the section. With ${\beta}$ taken as 2.0 and ${\theta}$ as 45$^{\circ}$, the expressions for shear strength become essentially identical to those traditionally used for evaluating shear resistance. Recent large-scale experiments, however, have demonstrated that these traditional expression can be seriously unconservative for large members not containing transverse reinforcement. And This paper can present only a brief introduction to shear design of AASHTO LRFD and is to review of the technical difficulty.

• Asian Journal of Turfgrass Science
• /
• v.10 no.4
• /
• pp.315-329
• /
• 1996

The changes of growth and protein synthesis pattern by aluminum (Al), cadmium (Cd), zinc (Zn) treatments were studied in Cyanobacterium synechocystis sp. PCC 6803. When exposed to Al from 5ppm to 3oppm, synechocystis grows normally. But more than that retard the growth of algae notably. The 0.05ppm Cd additions had no effect on the growth of algae. 0.1, 0.2, and 0.5ppm Cd inhibited growth. Under 1 and 2ppm Cd stress, growth was greatly diminished. Zn had dual effects. The growth of algae in media containing 5ppm was stimulated. As concentration increases more than l5ppm, growth inbition increases. Under 25ppm Zn stress, growth was greatly diminished. According to logistic theory, r and K values of each heavy metal-treated groups were estimated. Correlation analysis of r and K values with metal concentration shows that there is negative correlation between K and concentration in Cd and Zn treatments. Critical concentration which shows lethal or sublethal effect was estimated by t-test of each r and K value. The cells cultured in 10, 20, 30, 40 and 5oppm of Al, 1 and 2ppm of Cd, and 10, 15, 20, 25 and 30ppm of Zn for 4 days was used for protein analysis. Analysis of protein synthesis with SDS-PACE showed alterations of protein synthesis pattern. The synthesis of protein about 220kD increased markedly. In this study, it showed that resistance mechanism against Al, Cd, and Zn is K selection and that metal stress induced the change of protein synthesis in Cyanobacterium synechocystis sp. PCC 6803.Key words:Cyanobacterium synechocystis sp. FCC 6803, Heavy metals, Aluminum, Cadmiutm Zinc, Crowth, Frotein synthesis.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.855-875
• /
• 2015

Many novel materials exhibit a property of different elastic moduli in tension and compression. One such material is graphene, a wonder material, which has the highest strength yet measured. Investigations on buckling problems for structures with different moduli are scarce. To address this new problem, firstly, the nondimensional expression of the relation between offset of neutral axis and deflection curve is derived based on the phased integration method, and then using the energy method, load-deflection relation of the rod is determined; Secondly, based on the improved constitutive model for different moduli, large deformation finite element formulations are developed and combined with the arc-length method, finite element iterative program for rods with different moduli is established to obtain buckling critical loads; Thirdly, material mechanical properties tests of graphite, which is the raw material of graphene, are performed to measure the tensile and compressive elastic moduli, moreover, buckling tests are also conducted to investigate the buckling behavior of this kind of graphite rod. By comparing the calculation results of the energy method and finite element method with those of laboratory tests, the analytical model and finite element numerical model are demonstrated to be accurate and reliable. The results show that it may lead to unsafe results if the classic theory was still adopted to determine the buckling loads of those rods composed of a material having different moduli. The proposed models could provide a novel approach for further investigation of non-linear mechanical behavior for other structures with different moduli.

• Steel and Composite Structures
• /
• v.22 no.3
• /
• pp.537-565
• /
• 2016

Australian railway networks possess a large amount of aging timber components and need to replace them in excess of 280 thousands $m^3$ per year. The relatively high turnover of timber sleepers (crossties in a plain track), bearers (skeleton ties in a turnout), and transoms (bridge cross beams) is responsible for producing greenhouse gas emissions 6 times greater than an equivalent reinforced concrete counterparts. This paper presents an innovative solution for the replacement of aging timber transoms installed on existing railway bridges along with the incorporation of a continuous walkway platform, which is proven to provide environmental, safety and financial benefits. Recent developments for alternative composite materials to replace timber components in railway infrastructure construction and maintenance demonstrate some compatibility issues with track stiffness as well as structural and geometrical track systems. Structural concrete are generally used for new railway bridges where the comparatively thicker and heavier fixed slab track systems can be accommodated. This study firstly demonstrates a novel and resilient alterative by incorporating steel-concrete composite slab theory and combines the capabilities of being precast and modulated, in order to reduce the depth, weight and required installation time relative to conventional concrete direct-fixation track slab systems. Clear benefits of the new steel-concrete composites are the maintainability and constructability, especially for existing railway bridges (or brown fields). Critical considerations in the design and finite element modelling for performance benchmarking of composite structures and their failure modes are highlighted in this paper, altogether with risks, compatibilities and compliances.

• Ocean Systems Engineering
• /
• v.8 no.1
• /
• pp.41-55
• /
• 2018

Accidental oil and gas leak is a critical concern for the offshore industry because it can lead to severe consequences and as a result, it is imperative to evaluate the probabilities of occurrence of the consequences of the leakage in order to assess the risk. Event Tree Analysis (ETA) is a technique to identify the consequences that can result from the occurrence of a hazardous event. The probability of occurrence of the consequences is evaluated by the ETA, based on the failure probabilities of the sequential events. Conventional ETA deals with events with crisp failure probabilities. In offshore applications, it is often difficult to arrive at a single probability measure due to lack of data or imprecision in data. In such a scenario, fuzzy set theory can be applied to handle imprecision and data uncertainty. This paper presents fuzzy ETA (FETA) methodology to compute the probability of the outcomes initiated due to oil/gas leak in an actual offshore-onshore installation. Post FETA, sensitivity analysis by Fuzzy Weighted Index (FWI) method is performed to find the event that has the maximum contribution to the severe sequences. It is found that events of 'ignition', spreading of fire to 'equipment' and 'other areas' are the highest contributors to the severe consequences, followed by failure of 'leak detection' and 'fire detection' and 'fire water not being effective'. It is also found that the frequency of severe consequences that are catastrophic in nature obtained by ETA is one order less than that obtained by FETA, thereby implying that in ETA, the uncertainty does not propagate through the event tree. The ranking of severe sequences based on their probability, however, are identical in both ETA and FETA.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.2
• /
• pp.33-42
• /
• 1970

This report is concerned with the fahrication with the falricationof silicon VVC diode by the double diffusion planer technique. At first, some design charts for VVC diode were derived by considering the voltage-capacitance relations, the critical field intensity at the metallurgical junction, and the cut-off frequency of the diode. These charts enables the fabrication engineers to design VVC diode easily without going into the sophisticated design theory. We started with a 2.5 ohm-cm n-type epitaxial silicon wafer. The phosphorous was diffused by POCl3 impurity source. Then boron diffusion followed make hyperabrupt p-n junction by BN source. The maximum to minimum capacitance ratio of the diode as a tuning diode for a TV tuner made in these experiments was 4:1. Measured electrical characteristics of the sample diodes showed in good agreement with the theoretical expectations. Slicing and polishing technique of the silicon wafer and diffusion technique of the impurity atoms, which were employed in our study, are also stated briefly in this report.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.51-59
• /
• 2015

The year 1997 was when Korean Journal of Public Relations Research started to publish research articles. This study addresses the issue of theories in Korean public relations research. A total of 166 research papers are analyzed to see characteristics and changes during 2003-2012. Through this meta analysis, the researcher tries to see the big picture and discusses the right direction for the future of the public relations in many ways. Three different groupings were adopted to classify theories in the 10 year perion - 1. origins of theories(public relations field, related neighbor field, distant field), 2. target of analysis(individual, organization, society), 3. level of approach (systematic pluralistic, rhetorical, critical approach). According to the findings, though getting better, it was 'cold season' in public relations research because theories utilized in Korean public relations research were not very excellent qualitatively and qualitatively. Interdisciplinary approach is discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.719-730
• /
• 2007

This study presents a thin-walled space frame element based on the classical Timoshenko beam theory. The element is derived according to the assumed strain field in order to resolve the shear-locking phenomenon. The shape function is developed in accordance with the strain field which is assumed to be constant at a 2-noded straight frame element. In this study, the geometrically nonlinear analysis applies the Corotational procedure in order to evaluate unbalanced loads. The bowing effect is also considered faithfully. Two numerical examples are given; monosymmetric curved and nonsymmetric straight cantilever. When these example structures behave lateral-torsional bucking, the critical loads are obtained by this study and ABAQUS shell elements. Also, the post-buckling behavior is examined. The results give good agreement between this study and ABAQUS shell.

• Korean Journal of Social Welfare
• /
• v.59 no.1
• /
• pp.275-300
• /
• 2007

This study explores the trends and implications of social welfare qualitative research in Korea. The results are follows. At present, social welfare qualitative research is entering in the quickening period. The characteristics of configuration of social welfare qualitative research in Korea are overwhelming inferiority in post-positivism and heuristics, wide differences between universities in metropolitan area and in local area at the aspect of amounts of qualitative research products, rapid increase in the interests of qualitative research in doctoral candidates, and distinguishment of doctoral candidates as a leader group in qualitative research. The results of critics of qualitative researches are follow: 1) initiative of naturalistic interpretism 2) inclination of methodicism 3) poorness of critical themes 4) propensity in grounded theory. These trends of social welfare qualitative research in Korea, in spite of the limits, have various implications: 1) Trying to critics of social welfare knowledge based on positivism and formation of opposing discourse to positivism 2) diversification in paradigm of inquiry 3) spread of narrative thinking of social welfare phenomenon.

• The Journal of Society for e-Business Studies
• /
• v.18 no.1
• /
• pp.165-189
• /
• 2013

Conceptual modeling is a critical activity for developing successful business information systems. The objective of this study is to evaluate the possibility of applying the constant comparison method from the grounded theory to conceptual modeling. To achieve the objective, we trained novice modelers and split them into two groups for evaluation. The experimental results show that applying the constant comparison method could increase acceptability from more experienced conceptual modelers. Moreover, while the control group was experienced difficulties when domain knowledge is unfamiliar, the experimental group could handle difficulties more effectively. In addition, applying the constant comparison method also decreased the time to complete analysis for conceptual modeling.