• Journal of Welding and Joining
• /
• v.1 no.2
• /
• pp.53-60
• /
• 1983

COD test based on fracture mechanics concept was used in this study to evaluate the fracture toughness quantitatively. Effects of specimen sizes on critical COD value for ABS EH 36 steel and its submerged arc weldments, and the variation of critical COD value depending on metallurgical/mechanical heterogeneities caused by weld thermal cycles were investigated. Experiment was performed by using specimens made from base metal and submerged arc weldments according to BS 5762. Obtained results are summarized as follows; 1) Critical COD value for base metal decreases with increasing thickness of specimen. On hand, as the reduction ratio of critical COD decreases with increasing specimen thickness, critical COD value becomes constant above a thickness of specimen. 2) Critical COD value for weldment decreases with increasing thickness of specimen and was also affected by metallurgical states of base metal. 3) Size effects for weldment was greater at the hardened region. 4) Critical COD value was affected by microstructural change due to weld thermal cycles in weldments; that is, accicular ferrite formation is favorable for increasing of COD value.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.153-155
• /
• 2006

A major advantage of the area in and around Braunschweig is its concentration of major research institutes and small to large enterprises dealing with different modes of transportation. For many years, aviation has been a particular focus. The research institutes have aircraft and helicopters equipped especially for research projects, as well as other laboratory equipment, allowing simulation and testing of air traffic application both virtually and on real aircraft. In addition, with the Luftfahrtbundesamt (equivalent organization to FAA) and the Bundesstelle $f{\"{u}}r$ Flugunfalluntersuchung (equivalent to NTSB) both located at the Research Airport, it enables direct contact with two key air-traffic safety authorities. The institutes of DLR and the Technical University of Braunschweig are very active in rail transportation applications. Cooperation with the market leader in rail automation - Siemens Rail Automation, also located in Braunschweig - and with other companies in the Braunschweig region means that safety-critical road applications and mobility research is available due to the activities of a number of institutes. Cooperation with Volkswagen (VW) and other companies in the region ensure access to the market leaders' know-how in this sector. Current European activities within framework of the Galileo project offer particularly good opportunities for the Research Airport to leverage its expertise and position itself internationally as a specialist in safety-critical transport applications - the centre is an initiative of Niedersachsen and the Ministry of Economic Affairs, Labour and Transport Location and navigation plays a central role in all modes of transport - air, road and rail. The market is being revolutionized by the increasing integration of GNSS. The realization of the Galileo system will provide additional opportunities for the Research Airport: Galileo as a civil operated system offers service guarantees especially in the area of safety-critical applications in transportation. Notably standards, processes and authorizations related to the certification of safety-critical applications in the areas of air, road and rail transportation are still to be determined. GAUSS, located at the Research Airport Braunschweig, as an European centre of excellence for simulation, testing and certification of safety-critical applications can offer its expertise to validate the services guaranteed by the Galileo concessionaire.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.338.1-338
• /
• 2002

In this report, numerical investigations have demonstrated, that the displacement underneath a moving loading reach a maximum value, if the speed of the load is equal to propagation velocity of the maximum wave. The load speed for which the maximum displacement occurs is called critical speed. The critical speed divides the velocities in a subcritical and a super-critical region. By means of calculations the dynamic behaviour of the slab track-soil is investigated. (omitted)

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.265-275
• /
• 2001

This research has been performed to reveal the hysteresis phenomena of the hunting motion in a railway passenger cars. It is found that there are some factors and its operation region to make the nonlinear critical speed reacts to them more sensitively than the linear critical speed. The simulation results show that a self steering bogie system can be a substitute proposal to improve curving Performance together with the reduction of hysteresis of critical speed. Full scale roller rig test is carried out for the validation of the numerical results. Finally, it is certified that wear of wheel profile and stiffness discontinuities of wheelset suspension caused by deterioration have to be considered in the analysis to predict the hysteresis of critical speed precisely.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.10
• /
• pp.1105-1110
• /
• 2001

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2000

In this study, the bearing capacity behavior of strip footing located above a continuous cavity in sand was investigated experimentally. The model footing test was performed in a model box made by using raining method in sand. The model footing test results were compared with those obtained from theoretically proposed equations. The results of the analysis indicate that there is a critical region under the footing. For strip footing, there exists a critical depth below which the presence of the cavity has negligible influence on the footing performance. Only when the cavity is located within this region will the footing performance be significantly affected by the presence of the cavity. The size of the critical region depends on several factors such as footing shape, soil property, cavity size and cavity shape. When the cavity is located within the critical region, the bearing capacity of the footing varies with various factors, such as the size and location of the cavity and the depth of foundation. Based on the experimental study, the following conclusions were induced. 1. The ultimate bearing capacity due to the eccentricity of a underground cavity increases at the rate of the small rather than that due to the depth of a underground cavity. This indicates that the bearing capacity of a strip footing is influenced on the depth rather than the eccentricity of a underground cavity. 2. The critical $depth(D/B)_{cr}$, by underground cavity in sand soil ground that is made by the relative density($D_r$)=55%, 65%, 75%, approaches a range of about 8~10 in case of W/B=1, and about 11~13 in case of W/B=2. 3. In case of the relative density($D_r$) 75%, the most outstanding differential settlement trend is shown in the depth of 4~8cm regardless of the size of cavity, namely, when the value of D/B is 1~2. Therefore, a underground cavity influences on not only the decrease of the bearing capacity but also the differential settlement of a strip footing.

• Korean System Dynamics Review
• /
• v.17 no.1
• /
• pp.107-134
• /
• 2016

Accelerated ageing with low fertility is one of the most critical problems in Korea. Because of ageing via low fertility, Korea will face a serious demographic cliff. This research primarily focus on the analyzing the dynamics of the marginal ageing state and decreasing population especially in Eup and Myeon region. This study based on the system dynamics approaches for finding causal loop structure of marginal ageing and critical mass of population disappearing. The results of this study are summarized as follows. First, demographic marginalization trends have already begun in the Eups and Myons of Gun. Second, marginal aging speed in Eup/Myeon areas is causing an population disappearing in the near future. Third, critical mass of population disappearing will begin when the rate of marginal aging is exceed 82% after 2023.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1188-1195
• /
• 2006

This paper examines the critical air temperature at which frost formation does not occur on a cold plate in order to improve the efficiency of a heat pump. The critical air temperature on test points is obtained from numerical analysis and a correlation of the critical air temperature is derived as a function of frosting factors (air absolute humidity, air velocity, and cold plate temperature) by least square method. Experiments are carried out to verify the correlation proposed in this study, and the prediction obtained with the correlation agrees well with the experimental data. Based on the correlation, we propose the non-frosting regions according to frosting factors.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.4
• /
• pp.206-216
• /
• 2005

Numerical analysis has been carried out to investigate laminar convective heat transfer at zero gravity in a tube for supercritical water near the thermodynamic critical point. Fluid flow and heat transfer are strongly coupled due to large variation of thermodynamic and transport properties such as density, specific heat, viscosity, and thermal conductivity near the critical point. Heat transfer characteristics in the developing region of the tube show transition behavior between liquid-like and gas-like phases with a peak in heat transfer coefficient distribution near the pseudo critical point. The peak of the heat transfer coefficient depends on pressure and wall heat flux rather than inlet temperature and Reynolds number. Results of the modeling provide convective heat transfer characteristics including velocity vectors, temperature, and the properties as well as the heat transfer coefficient. The effect of proximity on the critical point is considered and a heat transfer correlation is suggested for the peak of Nusselt number in the tube.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.28.1-28
• /
• 2001

An automatic face recognition(AFR) of individuals is a significant problem in the development of computer vision. An AFR consists of two major parts which are detection of face region and recognition process, and the overall performance of AFR is determined by each. In this paper, the face region is acquired using chromaticity space, but this face region is a simple rectangle which doesn´t consider the shape information. By applying deformable templates to the face region, we can locate the position of the eyes in images. With the face region and the eye location information, more precise face region can be extract from the image. Because processing time is critical in real-time system, we use simplified eye templates and the modified energy function for the efficiency. We can get a good detection performance in experiments.