• Resources Recycling
• /
• v.33 no.1
• /
• pp.58-68
• /
• 2024

Critical minerals such as nickel, cobalt and lithium, are known as materials for cathodic active materials of lithium ion batteries. The consumption of the minerals is expected to grow with increasing the demands of electric vehicles, resulting from carbon neutrality. Especially, the demand for LIB (lithium ion battery) recycling is expected to increase to meet the supply of nickel, cobalt and lithium for LIB. The recycling of EOL (end-of-life) LIB can be achieved by leaching EOL LIB using inorganic acid such as HCl, HNO₃ and H₂SO₄, which are regarded as hazardous materials. In the present study, the potential use of MSA (Methanesulfonic acid), as an alternative lixiviant replacing sulfuric acid was investigated. In addition, leaching behaviors of NCM black mass leaching with MSA was also investigated by studying various leaching factors such as chemical concentration, leaching time, pulp density (P/D) and temperatures. The leaching efficiency of nickel (Ni), cobalt (Co), lithium (Li), and manganese (Mn) from LIB was enhanced by increasing concentration of lixiviant and reductant, leaching time and temperature. The maximum leaching of the metals was above 99% at 80℃. In addition, MSA can replace sulfuric acid to recover Ni, Co, Li, Mn from NCM black mass.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.185-197
• /
• 2023

The Gubong Au-Ag deposit consists of eight lens-shaped quartz veins. These veins have filled fractures along fault zones within Precambrian metasedimentary rock. This has been one of the largest deposits in Korea, and is geologically a mix of orogenic-type and intrusion-related types. Korea Mining Promotion Corporation drilled into a quartz vein (referred to as the No. 6 vein) with a width of 0.9 m and a grade of 27.9 g/t Au at a depth of -728 ML by drilling (No. 90-12) in the southern site of the deposit, To further investigate the potential redevelopment of the No. 6 vein, another drilling (No. 04-1) was carried out in 2004. In 2004, samples (wallrock, wallrock alteration and quartz vein) were collected from the No. 04-1 drilling core site to study the occurrence and chemical composition of Ti-bearing minerals (ilmenite, rutile). Rutile from mineralized zone at a depth of -275 ML occur minerals including K-feldspar, biotite, quartz, calcite, chlorite, pyrite in wallrock alteration zone. Ilmenite and rutile from ore vein (No. 6 vein) at a depth of -779 ML occur minerals including white mica, chlorite, apatite, zircon, quartz, calcite, pyrrhotite, pyrite in wallrock alteration zone and quartz vein. Based on mineral assemblage, rutile was formed by hydrothermal alteration (chloritization) of Ti-rich biotite in the wallrock. Chemical composition of ilmenite has maximum values of 0.09 wt.% (HfO₂), 0.39 wt.% (V₂O₃) and 0.54 wt.% (BaO). Comparing the chemical composition of rutile at a depth -275 ML and -779 ML, Rutile at a depth of -779 ML is higher contents (WO₃, FeO and BaO) than rutile at a depth of -275 ML. The substitutions of rutile at a depth of -275 ML and -779 ML are as followed : rutile at a depth of -275 ML Ba²⁺ + Al³⁺ + Hf⁴⁺ + (Nb⁵⁺, Ta⁵⁺) ↔ 3Ti⁴⁺ + Fe²⁺, 2V⁴⁺ + (W⁵⁺, Ta⁵⁺, Nb⁵⁺) ↔ 2Ti⁴⁺ + Al³⁺ + (Fe²⁺, Ba²⁺), Al³⁺ + V⁴⁺+ (Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + 2Fe²⁺, rutile at a depth of -779 ML 2 (Fe²⁺, Ba²⁺) + Al³⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + (V⁴⁺, Hf⁴⁺), Fe²⁺ + Al³⁺ + Hf ⁴⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + V⁴⁺ + Ba²⁺, respectively. Based on these data and chemical composition of rutiles from orogenic-type deposits, rutiles from Gubong deposit was formed in a relatively oxidizing environment than the rutile from orogenictype deposits (Unsan deposit, Kori Kollo deposit, Big Bell deposit, Meguma gold-bearing quartz vein).

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.17-18
• /
• 2003

Although flounder is one of the most important marine fish for aquaculture in Korea, feeding the flounder in commercial farms depends mainly on moist pellet in which over 70% frozen fishes (e.g. frozen horse mackerel) are incorporated in its formulation. Therefore, for further expansion of flounder farming, it is essential to employ practical formulated feeds that can support reasonable growth. Development of nutritionally balanced and cost-effective feeds is dependant on the information about nutritional requirement and feed utilization of the species. Nutrient and energy source in feed are needed for the growth and maintenance of fish. Protein is probably the most important nutrient affecting fish growth and feed cost. Therefore, it is essential to determine the optimum dietary protein level for the growth of fish, both its high proportion in the feed and because it is the main factor in determining feed cost. Dietary energy level is also critical because protein source in the feed is utilized as an energy source when the feed deficient in energy is fed to fish, whereas when the feed excess in energy is fed to fish, feed consumption decreased and resulted in growth reduction due to lack of other necessary nutrients for normal growth. Improper dietary protein, energy levels and/or their ratio will lead to an increase of fish production cost and deterioration of water quality resulting from wasted feed; thus, they are important in formulating commercial feed. Dietary lipids play important roles in providing energy and essential fatty acid for normal growth and survival of fish. Although carbohydrates are not essential nutrients for carnivorous fish, these compounds play important roles as a low-cost energy source for protein sparing and also as a feed binder. Nutrition researches for flounder have identified its requirements of protein, lipid and essential fatty acid, vitamin, and minerals for normal growth. Other studies have also been carried out to investigate the utilization of the protein, lipid and carbohydrate sources. Based on these nutritional information obtained, practical feed formulations have been studied for improve aquaculture production of flounder. The results of the researches on utilization of dietary protein, lipid and carbohydrate by flounder are discussed in this review.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.5-12
• /
• 1998

Pot experiment was conducted to investigate the effects of fly ash on growth responses and on accumulation of the heavy metals in soil. Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 0.4, 0.8, and 1.2 kg/pot(20L). Tobacco growth was better by application of fly ash than that by the control. However, the early stage of growth by application of bituminous coal, 1.2 kg/pot, was decreased due to the boron toxicity occurred by fly ash. Generally, tobacco yield was significantly increased with applying fly ash, showing the highest yield at 1.2 kg/pot for anthracite and at 0.8 kg/pot for bituminous coal. The content of total nitrogen in leaves was higher with fly ash than that of the control, while the content of calcium in leaves was low, Contents of heavy metal and the other minerals were not significantly different between the control and the treatment of fly ash. Soil pH after experiment was linearly increased with application level of fly ash, indicating that the application of bituminous coal was more effective than that of anthracite. Contents of available phosphate, exchangeable $Ca^{2+}$+ and $Mg^{2+}$ in soil were increased by application of fly ash, especially with bituminous coal. Contents of Cu, Cr, and Ni were increased with application level of bituminous coati even if the contents were still lower than critical levels for farming land. The other heavy metals were similar between the control and the application of fly ash.

• Structural Engineering and Mechanics
• /
• v.64 no.4
• /
• pp.391-402
• /
• 2017

In this paper, a new nonlocal trigonometric shear deformation theory is proposed for thermal buckling response of nanosize functionally graded (FG) nano-plates resting on two-parameter elastic foundation under various types of thermal environments. This theory uses for the first time, undetermined integral variables and it contains only four unknowns, that is even less than the first shear deformation theory (FSDT). It is considered that the FG nano-plate is exposed to uniform, linear and sinusoidal temperature rises. Mori-Tanaka model is utilized to define the gradually variation of material properties along the plate thickness. Nonlocal elasticity theory of Eringen is employed to capture the size influences. Through the stationary potential energy the governing equations are derived for a refined nonlocal four-variable shear deformation plate theory and then solved analytically. A variety of examples is proposed to demonstrate the importance of elastic foundation parameters, various temperature fields, nonlocality, material composition, aspect and side-to-thickness ratios on critical stability temperatures of FG nano-plate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.1
• /
• pp.7-13
• /
• 1990

Nutritional status of cattle in Java in Indonesia was investigated by evaluating P, Ca, Mg, K and Na concentrations in forage and plasma inorganic phosphorus (Pi), Ca and Mg, hematocrit and hemoglobin concentrations of cattle during both rainy and dry seasons in 1988. Investigations were conducted at Jonggol (West Java), Malang (East Java) and Majokerto (East Java). Low P content in forage averaging 0.11% on a dry matter basis, high Ca:P ratio in forage in the rainy season (7.7:1) and low plasma Pi concentrations averaging 4.71 mg/dl were observed in Jonggol. In all three places, Ca content in forages was higher than the requirement according to the NRC standard and plasma Ca concentrations were above the critical level. During the rainy season forty percent of cattle in Malang and Mahokerto showed plasma Mg concentrations below 2mg/dl in spite of normal Mg and K content in forage. Forage samples from each place showed a wide variety in Na content, and Na content of two thirds of forage samples was lower than the requirement according to the NRC standard. Hematocrit and hemoglobin concentrations in Malang and Majokerto showed higher values than the normal range.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.6
• /
• pp.659-667
• /
• 2014

Fruits are good sources of vitamins, minerals, fiber, and phytochemicals, which are known to reduce serum lipids, oxidative damage, and blood pressure as well as improve blood glucose control. The purpose of this study was to estimate nutrient quality indices of fruits by carrying out a critical analysis of pre-existing methods according to their nutritional compositions. Four methods were used to assess the nutrient indices of 26 fruits, which are frequently consumed by Koreans based on the fourth Korean National Health and Nutrition Examination Survey (2009). Naturally nutrient rich score (NNR), nutrient rich food (NRF), nutrient adequacy score (NAS), and nutrient density score (NDS) were used to calculate nutrient quality indices. The Korean Nutrition Society Food Composition database of fruits based on 100 g edible portions was used. The algorithm of each method included the mean percentage of daily values (Dietary Reference Intakes for Koreans, 2010) for particular nutrients based on consumption of 1,900 kcal/day. The relative score indicated that strawberries, kumquat, and lemon had high nutrient quality indices. In addition, mango, lemon, persimmon, strawberry, apricot, and tangerine fruits are rich in antioxidant nutrients such as ${\beta}$-carotene, vitamin C, vitamin E, and selenium. However, scores of nutrient quality indices did not imply that higher scores of particular fruits are superior. We suggest moderate seasonable consumption a variety of fruits. Our results can be used as a reference for consumers when they choose fruits.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.311-325
• /
• 2020

In this research work, the hygrothermal and mechanical buckling responses of simply supported FG sandwich plate seated on Winkler-Pasternak elastic foundation are investigated using a novel shear deformation theory. The current model take into consideration the shear deformation effects and ensures the zero shear stresses on the free surfaces of the FG-sandwich plate without requiring the correction factors "Ks". The material properties of the faces sheets of the FG-sandwich plate are assumed varies as power law function "P-FGM" and the core is isotropic (purely ceramic). From the virtual work principle, the stability equations are deduced and resolved via Navier model. The hygrothermal effects are considered varies as a nonlinear, linear and uniform distribution across the thickness of the FG-sandwich plate. To check and confirm the accuracy of the current model, a several comparison has been made with other models found in the literature. The effects the temperature, moisture concentration, parameters of elastic foundation, side-to-thickness ratio, aspect ratio and the inhomogeneity parameter on the critical buckling of FG sandwich plates are also investigated.

• Geomechanics and Engineering
• /
• v.30 no.4
• /
• pp.373-382
• /
• 2022

Unsaturated soil at high suctions is widespread. Many civil engineering projects are related to the hydro-mechanical behavior of unsaturated soils at high suctions, particularly in arid and semiarid areas. To investigate water retention behaviors of nine clayey soils (one is classified as fat clay and the others are classified as lean clay according to the unified soil classification system), the high suction (3.29-286.7 MPa) was imposed on the specimens at zero net stress by the vapor equilibrium technique. In this paper, the effect of void ratio on the water retention behavior at high suction was discussed in detail. Validation data showed that soil types, i.e., different mineralogical compositions, are critical in the soil water retention behavior at a high suction range. Second, the hysteresis behavior at a high suction range is mainly related to the clay content and the specific surface area. And the mechanism of water retention and hysteresis behavior at high suctions was discussed. Moreover, the maximum suction is not a unique value, and it is crucial to determine the maximum suction value accurately, especially for the shear strength prediction at high suctions. If the soil consists of hydrophilic minerals such as montmorillonite and illite, the maximum suction will be lower than 10⁶ kPa. Finally, using the area of hysteresis to quantify the degree of hysteresis at a high suction range is proposed. There was a good correlation between the area of hydraulic hysteresis and the specific surface area.