• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.179-186
• /
• 2001

As the freight traffic becomes heavier, the high speed of existing freight cars is essential instead of the construction of a new railway. The high speed can be achieved by the design modifications of the freight bogie. In this paper, an analytical model of freight bogie including the lateral force between rail and the flange of wheel is developed to decide the critical speed, which activates a hunting motion and tells the running safety of freight bogie. The dynamic responses of the analytical model were compared with an experimental data from a running test of a freight bogie and showed good agreements between them. The analytical model is used to find the design modifications of the freight bogie by parameter studies. The results show that the reduction of wheelset mass ratio and the increase of the axle distance of the freight bogie can increase the critical speed, but the primary lateral stiffness has little effects on the critical speed. And this also study shows that smaller wheel conicity deteriorates the running safety of the freight car, which means the overhauling of the wheel of freight bogie should be done regularly.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.87-95
• /
• 2002

원주의 항력 감소와 원주 주위 유동의 제어에 대하여 실험적으로 연구하였다. 원주 주위 유동을 제어하기 위하여 작은 제어봉을 원주 전방에 설치하였다. 실험시 원주 직경(D=30mm)에 기초한 레이놀즈수는 $Re=2 {/times} 10^4$이었다. 제어봉의 직경(d)은 4mm, 5mm, 6mm, 7mm로 변화시켰으며, 원주와 제어봉 사이의 거리(L)를 조절하면서 원주의 표면압력분포와 후류속도를 측정하였다. 제어봉으로부터의 와 유출이 사라지는 임계거리 (critical distance) $ L_C$는 $ L_C$ /D=1.5+0.83d이었는데, $ L_C$를 전후로 유동특성과 항력값이 크게 바뀌었다. 특히 원주와 제어봉 사이의 거리가 임계거리보다 짧은 경우에는 항력이 감소하다가 $ L_C$보다 크게 되면 증가하는 경향을 보였다. 제어봉의 직경이 d/D=0.233인 경우, L/D=2.013의 조건에서 원주는 약 29%의 항력 감소를 보였고, 전체 항력은 L/D=1.833조건에서 약 25% 항력이 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.901-904
• /
• 2001

For the c-axis oriented epitaxial YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on r-cut sapphire substrate it is necessary to deposit buffer layers. The CeO$_2$buffer layer was deposited on sapphire substrate using RF magnetron sputtering system. We investigated XRD pattern of CeO$_2$thin films at various sputtering conditions such as sputtering gas ratio, sputtering power, target to substrate distance, sputtering pressure and substrate temperature. The optimum condition was 15 mTorr with deposition pressure, 1:1.2 with $O_2$and Ar ratio and 9cm with target to substrate distance. The CeO$_2$(200) peak was notable for a deposition temperature above 75$0^{\circ}C$. The YBa$_2$Cu$_3$O$_{7-{\delta}}$ was deposited on CeO$_2$buffered r-cut sapphire substrate using pulsed laser ablation. The YBa$_2$Cu$_3$O$_{7-{\delta}}$CeO$_2$(200)/A1$_2$O$_3$thin film was exhibited a critical temperature of 89K.xhibited a critical temperature of 89K.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1244-1250
• /
• 2009

In this study it is intended to review the moving characteristics of smoke by performing visualization for the calculation of the optimal smoke exhaust air volume in case a fire occurs in tunnels where transverse ventilation is applied, and to obtain basic data necessary for the design of smoke exhaust systems by deriving optimal smoke exhaust operational conditions under various conditions. As a result of this study, when the critical velocity in the tunnel is 1.75 m/s and 2.5 m/s, the optimal smoke exhaust air volume has to be more than $173\;m^3/s$, $236\;m^3/s$ for the distance of the smoke moving which can limit the distance to 250m. In addition, in case of uniform exhaust the generated smoke is effectively taken away if the two exhaust holes near the fire region are opened at the same time.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.87-95
• /
• 1988

This paper is studied to know corrowive wear characteristics of austempered ductile cast ironin corrosive environments against mating SM45C hardened two test pieces in distilled water and NaCl aqueous solution. The corrosive wear mechanism was investigated by scanning electron microscopy and retained austenite volume fraction was investigated by X-ray diffractometer. The experimental result show that the corrosive wear characteristics depend largely on the $\textrm{Fe(OH)}_{3}$which is influenced by the critical sliding distance $L_{cr}$ and $L_{cr}$ shorted with increasing NaCl concentration. It was found that the carbides in matrix have a significant effect on their corrosive wear resisance and the fine acicular bainite showed corrosive wear resistance stronger than that of the coarse acicular and platelet bainite. From above results the model of corrosive wear mechanism in corrosive environments is proposed.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.47-51
• /
• 2011

This paper analyzes the fatigue-life of welded joints using the notch stress approach. In the notch stress approach, the notch effects are usually approximated by introducing weld-bead parameters for the local detailed weld joints. The actual bead shape is complex and 3-dimensional. It may also greatly influence the fatigue strength. In this study, the welded shape was modeled using a 3D-scanner. The critical distance method was adopted in the evaluation of the fatigue effective notch stress for the weldments. Fatigue life tests were performed to verify the present method of fatigue life estimation for two types of welded plates with longitudinal attachments. The estimated results of the present methods were applied to the results of the experiment. The results of the analysis showed that the scatter of fatigue-life for the experimental data expressed in the nominal stress was significantly reduced by applying the effective fatigue stress of the present study.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.206-214
• /
• 2013

This paper proposes a new method for monitoring local voltage stability using the saddle node bifurcation set or loadability boundary in two dimensional power parameter space. The method includes three main steps. First step is to determine the critical buses and the second step is building the static voltage stability boundary or the saddle node bifurcation set. Final step is monitoring the voltage stability through the distance from current operating point to the boundary. Critical buses are defined through the right eigenvector by direct method. The boundary of the static voltage stability region is a quadratic curve that can be obtained by the proposed method that is combining a variation of standard direct method and Thevenin equivalent model of electric power system. And finally the distance is computed through the Euclid norm of normal vector of the boundary at the closest saddle node bifurcation point. The advantage of the proposed method is that it gets the advantages of both methods, the accuracy of the direct method and simple of Thevenin Equivalent model. Thus, the proposed method holds some promises in terms of performing the real-time voltage stability monitoring of power system. Test results of New England 39 bus system are presented to show the effectiveness of the proposed method.

• 중환자간호학회지
• /
• 제11권1호
• /
• pp.28-34
• /
• 2018

Purpose : The purpose of this study was to compare the effect of recirculation rate according to cannulation direction and interval among hemodialysis patients with arteriovenous fistula (AVF). Method : The research used repeated measures design. This study was conducted among thirty patients who received hemodialysis three times a week for longer than a year through AVF at the I University hospital. Three different types of interventions were administered to the participants each week for three weeks. Needles were placed at a different distance and in a different direction each week: 7 cm apart from each other in antegrade direction during the first week, 5 cm apart in retrograde direction in the following week, and 7 cm apart in retrograde direction in the third week. Results : No significant differences in the recirculation rate were found due to any of the three tested methods (p = 1.00). Conclusion : This finding suggests that, if the patients have well-functioned AVF, we can choose an appropriate intervention from among the three methods in consideration of the patient's diverse needs.

• 대한화학회지
• /
• 제45권6호
• /
• pp.570-576
• /
• 2001

YOB에 $Eu^{3+}$를 첨가하여 고상 반응으로 합성하였다. YOBr: $Eu^{3+}$ 형광체는 621nm에서 강한 적색 발광을 보이며, $Eu^{3+}$이온 농도가 0.05mol일 때 외대 발광 휘도를 나타냈다. 이때, 적색 발광을 유발하는 전이는 $^5D_0{\to} ^7F_2$ 이며, $Eu^{3+}$이온의 농도에 따른 발광 스펙트럼과 잔광시간 곡선을 통해 YOBr: $Eu^{3+}$형광체의 PL거동을 규명하였다. Inokuti-Hirayama식으로 잔광시간 곡선을 fitting 한 결과, YOBr내의 $Eu^{3+}$간 다중 극자 상호작용 유형(multipolar interaction)은 쌍극자-쌍극자 상효작용(dipole-dipole interaction)으로 밝혀졌다. 또한 본 연구에서는 임계거리를 구하기 위해 임계농도에 의한 계산 외에도 Inokuti-Hirayama식으로부터 fitting한 C/$C_0$값으로 구하는 방법과 $Eu^{3+}$의 여기 및 발광 스펙트럼으로 spectral overlap하여 임계거리를 구하고자 시도 하였다. 각각의 방법으로 구한 임계거리는 17.30, 10.51 및 7.18$\AA$으로 약간의 편차를 보이지만 대략적인 크기를 갖고 있어, 이는 계산이나 측정상의 오차를 감안하면 모두 임계거리를 구하는 유용한 방법으로 판단된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.742-762
• /
• 2015

In this study, we propose a distance metric learning approach called discriminant metric learning (DML) for face verification, which addresses a binary-class problem for classifying whether or not two input images are of the same subject. The critical issue for solving this problem is determining the method to be used for measuring the distance between two images. Among various methods, the large margin nearest neighbor (LMNN) method is a state-of-the-art algorithm. However, to compensate the LMNN's entangled data distribution due to high levels of appearance variations in unconstrained environments, DML's goal is to penalize violations of the negative pair distance relationship, i.e., the images with different labels, while being integrated with LMNN to model the distance relation between positive pairs, i.e., the images with the same label. The likelihoods of the input images, estimated using DML and LMNN metrics, are then weighted and combined for further analysis. Additionally, rather than using the k-nearest neighbor (k-NN) classification mechanism, we propose a verification mechanism that measures the correlation of the class label distribution of neighbors to reduce the false negative rate of positive pairs. From the experimental results, we see that DML can modify the relation of negative pairs in the original LMNN space and compensate for LMNN's performance on faces with large variances, such as pose and expression.