• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.768-773
• /
• 2004

When a gas expands through a convergent nozzle in which the ratio of the ambient to the stagnation pressures is higher than that of the critical one, the issuing jet from the nozzle is underexpanded. If a flat plate is placed normal to the jet at a certain distance from the nozzle, a detached shock wave is formed at a region between the nozzle exit and the plate. In general, supersonic moist air jet technologies with nonequilibrium condensation are very often applied to industrial manufacturing processes. In spite of the importance in major characteristics of the supersonic moist air jets impinging to a solid body, its qualitative characteristics can not even know. In the present study, the effect of the nonequilibrium condensation on the underexpanded moist air jet impinging on a vertical flat plate is investigated experimentally. Flow visualization and impact pressure measurement are performed for various relative humidities and flat plate positions. The obtained results show the plate shock and Mach disk are dependent on the nozzle pressure ratio and the relative humidity, but for a given nozzle pressure ratio, the diameters of the plate shock and Mach disk depend on the stagnation relative humidity. The impact pressure deviation from the flow of without condensation is large, as the relative stagnation humidity increases.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.951-957
• /
• 1999

The saddle node bifurcation (SNB) and the distance voltage instability are valuable information in power system planning and operation. This paper presents a new efficient, robust and unified strategy to compute the SNB by the combined use of the continuation power flow (CPF), Point of Collapse (PoC) method, and the method of a pair of multiple load flow solutions (PMLFS) with Lagrange interpolation utilizing only their advantages: the approximate nose curves and critical loading are determined fast by Lagrange-interpolating two stable and two unstable solutions obtained by using the robust CPF and PMLFS; the exact SNB is computed by the quadratically converging PoC method. The proposed method has been tested on Klos-Kerner 11-bus, New England 30-bus, IEEE 118-bus and KEPCO 791-bus systems. The method is found to be so efficient that computation time for determining the SNB of the KEPCO 791-bus system is 17.82 sec by a notebook PC with 300 MHz Pentium processor.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.455-463
• /
• 2002

Ionic Polymer metal composite(IPMC), one of new actuation materials of EAPs is fabricated by electroless plating of platinum on both sides of the perfluorosulfonic acid film or Nafion film and its electromechanical characteristics are investigated. The IPMC strip bends towards anode under electrical field. As the number of plating cycle increases, the distance between plated platinum electrodes on both sides of Nafion membrane decreases and also the displacement is almost inversely proportional to the number of plating. The displacement of IPMC strip depends on voltage magnitude and applied signal frequency and its maximum deformation is observed at a critical frequency, resonant frequency. Low pressure sandblasting is used for surface treatment of Nafion membrane and at 8 times of plating cycle produced actuator with high displacement performance. For more efficiency of fabricated IPMC, it is useful to add one or two surface developing step which is the second reduction process using hydrazine.

• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.108-115
• /
• 1995

본 논문에서는 충격파력을 받는 케이슨 방파제의 동적거동해석 모델에 대해서 연구하였다. 케이슨 구조는 강체로 가정하였으며, 기초사석 및 지반은 반무한탄성지반이론에 의거하여 가상 부가질량, 스프링 및 감쇠계수로 이상화하였다. 주파수 의존 유체의 부가질량 및 감쇠계수는 시간기억함수와 무한대 주파수에 대한 부가질량으로 나타내었다. 또한, 케이슨의 영구적 활동을 모의하기 위하여 수평방향의 스프링을 형성거동을 하는 비선형 스프링으로 모형화하였다. 수리실험치와 비교결과, 본 모델은 상당히 좋은 결과를 줌을 알 수 있었다. 케이슨의 동적 거동에 영향을 주는 주요 인자의 변화에 따른 민감도 해석을 수행하였으며, 케이슨의 영구적 활동거리 및 한계중량 예측에의 적용성조사를 위한 수치실험도 병행하였다.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.725-736
• /
• 2016

There is a growing concern on the improvement of water distribution pipeline for multi-regional water supply system in Korea along with its aging infrastructure. Rehabilitation of large diameter pipeline is more efficient in cost and time compared to replacement with trenching. The procedure for rehabilitation are diagnosis, cleaning, spraying coating material, and final inspection. The internal state of pipeline was carefully diagnosed and got C grade, which required rehabilitation. We found that 17,274,787,000 Korean won could be saved after pipe surface coating because of increased C coefficient of Hazen-Williams equation. Optimal coating material was D polyurea. We also found optimal distance between spraying nozzle and pipe wall to be 70 - 80 cm, which were critical factors for coating quality. This study also illustrated the time for spray drying to be more than 30 min. These results could be used in the quality control process during rehabilitation of aged pipelines.

• 터널과지하공간
• /
• 제20권6호
• /
• pp.465-474
• /
• 2010

중규모 터널(연장 1 km 이내) 건설은 최근 매년 30% 이상의 증가율을 보이고 있으나 환기 및 방재시설 설치기준은 제정되어 있지 않은 상태라 장대터널을 대상으로 한 설치기준을 따르고 있다. 이에 따라 중규모터널 환기 및 방재시설의 최적화 노력이 요구되고 있다. 본 연구에서는 중규모 터널 내 20 MW 규모의 화재 시 발생하는 화재연 역류거리, 고온 열기류 확산범위, 가시거리 20 m 이하(상류) 구간분포, 임계풍속 확보여부, 대피시간 등을 CFD 분석을 통해 방재팬의 적정 초기 가동시간을 도출하여 방재시스템의 최적운전 방안의 제시를 목적으로 한다.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.430-437
• /
• 2003

A conveying fluid cantilever pipe subjected to a uniformly distributed tangential follower force and three moving masses upon it constitute this vibrational system. The influences of the velocities of moving masses, the distance between two moving masses, and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a cantilever pipe system by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a cantilever pipe without moving masses, and three constant velocities and three constant distances between two moving masses are also chosen. When the moving masses exist on pipe, as the velocity of the moving mass and the distributed tangential follower force Increases. the deflection of cantilever pipe conveying fluid is decreased, respectively Increasing of the velocity of fluid flow makes the amplitude of a cantilever pipe conveying fluid decrease. After the moving mass passed upon the pipe, the tip- displacement of a pipe is influenced by the coupling effect between interval and velocity of moving mass and the potential energy change of a cantilever pipe. Increasing of the moving mass make the frequency of the cantilever pipe conveying fluid decrease.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권6호
• /
• pp.280-298
• /
• 2008

For efficient content-based image retrieval, diverse visual features such as color, texture, and shape have been widely used. In the case of leaf images, further improvement can be achieved based on the following observations. Most plants have unique shape of leaves that consist of one or more blades. Hence, blade-based matching can be more efficient than whole shape-based matching since the number and shape of blades are very effective to filtering out dissimilar leaves. Guaranteeing rotational invariance is critical for matching accuracy. In this paper, we propose a new shape representation, indexing and matching scheme for leaf image retrieval. For leaf shape representation, we generated a distance curve that is a sequence of distances between the leaf’s center and all the contour points. For matching, we developed a blade-based matching algorithm called rotation invariant - partial dynamic time warping (RI-PDTW). To speed up the matching, we suggest two additional techniques: i) priority queue-based pruning of unnecessary blade sequences for rotational invariance, and ii) lower bound-based pruning of unnecessary partial dynamic time warping (PDTW) calculations. We implemented a prototype system on the GEMINI framework [1][2]. Using experimental results, we showed that our scheme achieves excellent performance compared to competitive schemes.

• Structural Engineering and Mechanics
• /
• 제76권3호
• /
• pp.325-336
• /
• 2020

In this study, the continuous and discontinuous contact problems of functionally graded (FG) layer resting on a rigid foundation were considered. The top of the FG layer was loaded by a distributed load. It was assumed that the shear modulus and the density of the layer varied according to exponential functions along the depth whereas the the Poisson ratio remained constant. The problem first was solved analytically and the results were verified with the ones obtained from finite element (FE) solution. In analytical solution, the stress and displacement components for FG layer were obtained by the help of Fourier integral transform. Critical load expression and integral equation for continuous and discontinuous contact, respectively, using corresponding boundary conditions in each case. The finite element solution of the problem was carried out using ANSYS software program. In continuous contact case, initial separation distance and contact stresses along the contact surface between the FG layer and the rigid foundation were examined. Separation distances and contact stresses were obtained in case of discontinuous contact. The effect of material properties and loading were investigated using both analytical and FE solutions. It was shown that obtained results were compatible with each other.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.590-599
• /
• 1994

취성재료의 균열첨단에서 전위의 이동에 대한 거동을 이해하기 위하여 단결정의 알루미나에 대한 취성-연성 전이(BDT)에 대한 한 연구가 진행되었다. 여러 온도에서, 예비균열된 시편으로 4점 굽힘시험을 이용하여 임계응력확대계수와 항복강도가 측정되었다. 그 결과로, BDT온도는 변형속도와 시편 방향에 따라 달랐다.:(1120)파단면에 대하여 $4.2 \times 10^{-6}$와 $4.2 \times 10^{-7}s^{-1}$에서 BDT온도는 각각$1034^{\circ}C$, $1150^{\circ}C$이었다. 또한 4점굽힘 시험을 이용하여 연성영역에서 균열첨단으로 부터 방출된 전위의 이동거리과 방향은 에칭 피트법에 의해서 측정되었다. 이중 에칭법을 이용하여 즉정된 사파이어에서 전위의 이동속도는 모델링 연구에 응용되었다.