• 한국지능시스템학회논문지
• /
• 제11권6호
• /
• pp.449-453
• /
• 2001

본 논문에서는 F-투영법과 기하학적인 성장기준을 적용하여 웨이블렛 신경망의 적응적인 구조를 설계할수 있는 알고리즘을 제안한다. 기하학적인 성장기준은 지역오차를 고려한 예측 오차기준과 준직교성을 보장하는 웨이블렛 신경망의 노드를 추가하기 위한 각도기준으로 구성되어 있다. 이러한 성장기준을 웨이블렛 신경망을 설계자 의도에 부합하도록 구성할 수 있는 방법론을 제시할 수 있다. 제안한 웨이블렛 신경망의 적응구조 설계 알고리즘을 1차원과 2차원 함수 근사화 문제에 적용하여 rsm사한 능력의 우수성을 검증하였다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1285-1293
• /
• 1992

본 연구에서는 glass/epoxy 직조된 복합재료에 있어서 원공 및 판폭의 크기가 노치강도에 미치는 영향을 명확히 하고, 또한 노치강도 및 파괴조건과 위에서 언급한 특성길이와의 관계를 검토하였다.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.59-76
• /
• 2016

The non-linear Hoek-Brown failure criterion has been widely accepted and applied to evaluate the stability of rock slopes under plane-strain conditions. This paper presents a kinematic approach of limit analysis to assessing the static and seismic stability of three-dimensional (3D) rock slopes using the generalized Hoek-Brown failure criterion. A tangential technique is employed to obtain the equivalent Mohr-Coulomb strength parameters of rock material from the generalized Hoek-Brown criterion. The least upper bounds to the stability number are obtained in an optimization procedure and presented in the form of graphs and tables for a wide range of parameters. The calculated results demonstrate the influences of 3D geometrical constraint, non-linear strength parameters and seismic acceleration on the stability number and equivalent strength parameters. The presented upper-bound solutions can be used for preliminary assessment on the 3D rock slope stability in design and assessing other solutions from the developing methods in the stability analysis of 3D rock slopes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.600-605
• /
• 2004

The road construction with horizontal expansion of country using and augmentation of traffic demand is advanced actively and it accompanies hereupon, the above of 70% of the country is formed at the mountain in our country where the hazard cut slope has been created. In this study, It is prepared a effective management countermeasure of cut slope introduced priority investigation decision method against hazard cut slope which is influenced by abnormally rainfall by an unusual change in the weather such as a guerilla rainfall character. In meaning link, It was executed collapse cause by failure character analysis in the cut slope which has failed for the last five years and it is prepared the hazard grade criterion from E to A grade according to collapse cause. It is decided that a maintenance management grade by the hazard grade classification criterion of cut slope. So It is possible to hazard cut slope. It is established failure protection counter countermeasure by effective maintenance management through the hazard grade c1assification criterion and it will be able to dispose to advanced nation level like Hong Kong and Japanese.

• 한국해양공학회지
• /
• 제7권2호
• /
• pp.57-67
• /
• 1993

The fracture behavior of plain woven glass/epoxy composite plates with a crack is investigated under static tensile loading. It is shown in this paper that the characteristic length associated with the point stress criterion depends on the crack length. To predict the not ched tensile strength, the point stress criterion proposed by Whitney and Nuismer are modified. An excellent agreement is found between the experimental results and the analytical prediction of the modified point stress criterion. The condition of unstable crack growth in the presence of a per-existing flaw(machined notch) is examined by means of the maximum stress intensity factor $K_max$ using maximumload P$_max$. The values of $K_max$ evaluated from energy release rate G$_max$(the compliance me thod) indicate a wide difference. Therefore in regard to anisotropy and heterogeneity of the composite materials studied, the modified shape correction factor f(a/W) is obtained. $K_max$evaluated by the compliance method a little or insignificantly depends on the initial crack length a, the specimen thickness B, the crack angle .theta. and the specimen geometry.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.57-64
• /
• 1998

This study is concerned with criterion for membrane to shell conversion in two-dimensional elastic-plastic finite element analysis using membrane/shell mixed element. It is well known that in the sheet metal forming some parts of the sheet deform under almost pure stretching (membrane) conditions, whereas other parts in contact with sharp tooling surfaces can develop significant bending strains. The membrane analysis has a short computational time however, in the membrane analysis the bending effects can not be condidered at all. On the other hand, the shell analysis allows the consideration of bending effects, but involves too much computational time. So Onatel),2), Yang et al3),4) developed the membrane/shell mixed element. Onate introduced the energy ratio parameter and Yang et al introduced the ratio of thickness to radius of curvature as the criterion. In the present study we propose a new criterion by using the angle between both side elements in the nodal point.

• 터널과지하공간
• /
• 제21권3호
• /
• pp.174-180
• /
• 2011

횡등방성 암석의 강도해석에 활용할 목적으로 이방성 Mohr-Coulomb 파괴조건식을 제안하였다. 제안된 파괴조건식에서는 Pietruszczak & Mroz(2001)가 제안한 조직텐서를 도입하여 마찰각과 점착력을 조직텐서의 스칼라함수로 정의하였다. 두 강도정수의 이방성은 주응력좌표계와 재료 주좌표계의 상대적 회전을 바탕으로 계산된다. 이방성 파괴조건식을 최대로 하는 임계면을 찾는 방법이 Lagrange 승수법에 기초하여 제안되었다. 수치삼축압축 시험을 실시한 후 삼축압축강도와 파괴면 경사각 분석을 통하여 제안된 이방성 파괴함수의 성능을 검증하였다.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.829-846
• /
• 2017

Purpose: This paper compares the effectiveness of typical selective assembly criteria and suggests the most promising one. Based on the result of a computer simulation, the key issues of selective assembly are examined and the best criterion is recommended from the effectiveness perspective. Methods: Using JAVA program, production of ten thousand units for each pair of components are simulated for selective assembly of the two types. And the number of mismatching and the fraction nonconforming for each criterion are determined. Results: The best match criterion appeared to be most promising from the perspectives of both mismatching and nonconforming problems. Its effectiveness appears to be also good even when the precision of one component is different from that of the other. Conclusion: For designing an optimal method for selective assembly, the best match criterion is recommendable as the base criterion.

• 소성∙가공
• /
• 제21권5호
• /
• pp.298-304
• /
• 2012

The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation.

• 한국환경농학회지
• /
• 제27권4호
• /
• pp.395-405
• /
• 2008

The objective of this study was to set priority for future core technologies in agricultural and environmental science using analytic hierarchy process(AHP). Forty-six technologies were derived by specialist meetings. Evaluation criteria, for setting the priority were decided as 'technology', 'marketability', and 'public'. Eighteen specialists in agricultural and environmental science answered to the questionnaire for AHP. As the results, 'technology' was decided as the most important evaluation criterion. The 'Feasibility' in 'technology' criterion, 'Market Growth' in 'marketability' criterion, and 'Impact to other industry' in 'public' criterion were decided as sub-criteria in each criterion. The most important technology was 'Risk assessment of toxic heavy metals and establishment of accreditation criteria for environmentally friendly agricultural products.