• 제목/요약/키워드: Criteria for modeling accuracy

검색결과 56건 처리시간 0.021초

배출량 목록에 따른 수도권 PM10 예보 정합도 및 국내외 기여도 분석 (Impact of Emission Inventory Choices on PM10 Forecast Accuracy and Contributions in the Seoul Metropolitan Area)

  • 배창한;김은혜;김병욱;김현철;우정헌;문광주;신혜정;송인호;김순태
    • 한국대기환경학회지
    • /
    • 제33권5호
    • /
    • pp.497-514
    • /
    • 2017
  • This study quantitatively analyzes the effects of emission inventory choices on the simulated particulate matter (PM) concentrations and the domestic/foreign contributions in the Seoul Metropolitan Area (SMA) with an air quality forecasting system. The forecasting system is composed of Weather Research and Forecasting (WRF)-Sparse Matrix Operator Kernel Emissions (SMOKE)-Community Multi-Scale Air Quality (CMAQ). Different domestic and foreign emission inventories were selectively adopted to set up four sets of emissions inputs for air quality simulations in this study. All modeling cases showed that model performance statistics satisfied the criteria levels (correlation coefficient >0.7, fractional error <50%) suggested by previous studies. Notwithstanding the apparently good model performance of total PM concentrations by all emission cases, annual average concentrations of simulated total PM concentrations varied up to $20{\mu}g/m^3$ (160%) depending on the combination of emission inventories. In detail, the difference in simulated annual average concentrations of the primary PM coarse (PMC) was up to $25.2{\mu}g/m^3$ (6.5 times) compared with other cases. Furthermore, model performance analyses on PM species showed that the difference in the simulated primary PMC led to gross model overestimation in general, which indicates that the primary PMC emissions need to be improved. The contribution analysis using model direct outputs indicated that the domestic contributions to the annual average PM concentrations in the SMA vary from 44% to 67%. To account for the uncertainty of the simulated concentration, the contribution correction factor method proposed by Bae et al. (2017) was applied, which resulted in converged contributions(from 48% to 57%). We believe this study shows that it is necessary to improve the simulated concentrations of PM components in order to enhance the accuracy of the forecasting model. It is deemed that these improvements will provide more accurate contribution results.

교합관계 기록 재료의 정확성에 관한 임상적 비교 연구 (AN EXPERIMENTAL STUDY ON THE ACCURACY OF INTEROCCLUSAL RECORDING MATERIALS)

  • 박홍렬;장익태;김광남
    • 대한치과보철학회지
    • /
    • 제28권2호
    • /
    • pp.91-108
    • /
    • 1990
  • The purpose of this study was to compare the maganitude of the discrepancies of the mounting errors in according to the states of dentitions, and to the superoinferior, anteroposterior, and rightleft driecetions. GROUP I. : Fourteen patients 22 to 26 years of age with a full complement of teeth, were used in the study. The criteria fro patient selection were a complete dentition, sparse restorarive treatment, and adequate posterior and anterior occlusan stops. And they had no sign and sympton at TMG area. GROUPII. : Eigth patients 37 to 62 years of age with bilateral free ends. The criteria for patient selection were Kennedy classification class 1 cases, and adequate posterior and anterior stops. And the opposite dentitions were a full complement of teeth. Irreversible hydrocolloid impresiion of each arch was taken of each patient. These were immediatel poured in stone and mounted on a Denar Mark II. Articulator with the arbitrary slidematic face-bow. With hand articulation th e mandibular cast was mounted to the maxillary cast in centric occlusion. Five types of interocclusal records were taken of each patient : (1) aluwax (2) baseplate wax; (3) znic oxide-eugenol pasts; (4) polyether (Ramitec); (5) modeling compound. All measurement of the five selected recording materials were compared with those of the hand-articulated full arch models in centric occlusion or maximum interdigitation. The results were as follows; 1. There were statistical differences in amount of devitation in according to the materials and the states of dentition. The amount of deviation of compound was the largest. 2. There were statistical differences in amount of deviation in complete dentition at all directions. The amount of diviation of compound was the largest. And at the right-left direction the amount of znic oxide-eugenol paste was larger than that of baseplate wax. 3. There was a statistical difference in amount of diviations in partial edentulous dentition at the superoinferior direction. The amount of deviation of compound was larger than that of znic oxide-eugenol paste. 4. There was as statistical difference in amount of deviations in partial edentulous dentition at the right-left direction. The amount of deviation of baseplate wax was larger that tnat of polyether. 5. There was not a statistical difference in amount of diviation in partial edentulous dentition at the anteroposterior direction.

  • PDF

관측자료 동화기법과 댐운영을 고려한 실시간 댐 수문량 예측모형 개발 (Development of Realtime Dam's Hydrologic Variables Prediction Model using Observed Data Assimilation and Reservoir Operation Techniques)

  • 이병주;정일원;정현숙;배덕효
    • 한국수자원학회논문집
    • /
    • 제46권7호
    • /
    • pp.755-765
    • /
    • 2013
  • 본 연구의 목적은 앙상블 칼만필터링 기법과 연속형 강우-유출모형을 연계한 SURF 모형과Auto ROM을 결합한 실시간 댐 수문량 예측모형(DHVPM)을 개발하고 그 적용성을 평가하는데 있다. 대상유역은 충주댐 상류유역을 선정하였으며 2006~2009년 동안 연최대 유입량이 발생한 4개 사례를 선정하였다. 관측유량 자료동화 적용에 따른 선행시간 1시간 유입량에 대한 첨두유량 상대오차, 평균제곱근오차, 모형효율성계수를 산정한 결과, 2007년 첨두유량 상대오차 결과를 제외한 모든 사례에서 자료동화기법을 적용한 결과가 우수한 것으로 나타났다. 현시점으로 가정한 가상시점에서 예측 선행시간 10시간에 대해 유입량을 예측한 결과에서, 유역평균 강우량의 오차가 큰 경우에 대해 자료동화기법을 적용함으로써 예측 유입량의 오차가 줄어드는 것을 확인하였다. 이상의 결과로부터 실시간 예측유입량의 정확도를 향상시키기 위해서는 관측유입량의 실시간 활용이 가능한 환경에서 자료동화기법을 연계한 유입량 예측모형을 이용하는 것이 바람직할 것으로 판단된다.

에너지성능지표(EPI)를 대상으로 한 개방형BIM기반 건축인허가 개선방향 제시 (Improvement of Open BIM-based Building Permission Process Using EPI(Energy Performance Index))

  • 김인한;김민찬;최중식
    • 한국건설관리학회논문집
    • /
    • 제16권6호
    • /
    • pp.124-135
    • /
    • 2015
  • 세계적으로 환경오염문제가 대두되면서 국내에서도 정부와 민간차원에서 친환경건축을 위한 노력이 활발히 진행 중이다. 하지만 건축물의 친환경 성능 및 친환경 관련 법규 및 기준 등에 대한 평가환경은 2차원기반의 수작업을 통한 평가로 진행되기 때문에 시간, 비용, 노동력 등이 많이 소요되며 평가의 정확성 및 효율성을 확보하기 어렵다. 따라서 본 논문에서는 개방형BIM기반으로 친환경건축 관련 인허가 업무의 개선을 목적으로 친환경건축 관련 인허가 조건 중 에너지성능지표 평가항목과 IFC포맷의 데이터와 연계를 통한 평가방안 모색하고 발생하는 문제점에 대한 대안을 제시하며 이를 반영한 평가프로그램의 활용으로 평가 프로세스를 제시함으로써 개방형BIM기반으로 에너지성능지표의 평가를 자동화하는 방안을 제시한다. 본 연구에서 제시된 방안을 친환경건축 관련 인허가 업무에 적용함으로써 업무절차의 간소화와 자동화를 통한 시간, 비용, 노동력의 절감을 기대할 수 있으며 설계변경 시 요구되는 절차가 단순화되어 업무의 생산성과 효율성이 향상되며 검토과정과 결과 값의 투명성과 검토의 정확성과 신뢰도를 확보 할 수 있을 것으로 기대한다.

의료영상 진단을 위한 팔꿉관절 X-선 검사 보조기구 개발 (Development of Elbow Joint X-ray Examination Aid for Medical Imaging Diagnosis)

  • 김형균
    • 한국방사선학회논문지
    • /
    • 제18권2호
    • /
    • pp.127-133
    • /
    • 2024
  • 팔꿉관절은 3개의 뼈대가 조합하여 관절을 이루고 있으며 신체적 활동 및 외력에 의한 이상 시 X-선 등, 방사선 검사로 영상진단을 한다. 팔꿉 관절 선행연구에 의하면 전완부(forearm)의 Z축 거상에 의한 기울기 자세에서 영상평가 기준에 부합하는 새로운 검사법이 발표되어 이에 최적화된 기구를 설계하고 다른 상지 검사에서도 활용 가능한 보조기구를 개발하고자 하였다. 2D 도면 및 3D 모델링 설계로 디자인 후 4부분의 파트로 구분 된 디자인을 ABS 소재의 3D 프린팅 방법으로 출력 후 조립 단계를 거쳐 제품을 완성하였다. 개발된 보조기구는 Z축 거상 기울기 4단계 각도(0, 5, 10, 15도) 기능과 1도 단위로 360도 회전되어 고정하는 기능으로 구성하였다. 개발된 보조기구는 사용 빈도의 누적 및 신체적 활용에 의한 하중 문제에 대해 구조해석을 통하여 최대 등가응력(equivalent stress) 56.107 Pa, 변위(displacement) 1.6548e-5 mm 의 안전한 물성치 범위로 개발되었다. 또한 개발된 보조기구는 팔꿉관절의 X-선 검사뿐만 아니라 위팔뼈 회전에 의한 어깨 기능검사에서도 활용할 수 있으며 비금속 소재로 MRI, CT 검사에서도 적용이 가능하도록 개발되었다. 개발된 보조기구는 향후 다양한 장치 및 의료영상 검사의 임상 적용을 통하여 검사의 정확성 및 효율화에 기여하리라 판단한다.

하나의 이상구간을 가지는 테스팅 단계에서의 소프트웨어 신뢰도 성장 모형화 (Software Reliability Growth Modeling in the Testing Phase with an Outlier Stage)

  • 박만곤;정은이
    • 한국정보처리학회논문지
    • /
    • 제5권10호
    • /
    • pp.2575-2583
    • /
    • 1998
  • 소프트웨어 산업에서 고신뢰성의 소프트웨어 시스템을 생산하고 그들의 성능을 평가하는 일이 중요한 관심사항이 되어왔다. 소프트웨어의 평가는 주로 소프트웨어 시스템의 신뢰성과 성능의 양쪽 관점에서 수행되어져 왔다. 소프트웨어신뢰도는 소프트웨어 테스팅 단계 동안에 한 고정된 시간구간에서 소프트웨어 오류가 발생하지 않을 확률을 말한다. 이들 이론적인 소프트웨어 신뢰성 모델들은 가끔 어떤 특정한 테스팅 구간에서는 하나의 어떤 소프트웨어 오류가 발생하여 소프트웨어 오류를 디버깅하여도 소프트웨어 고장율이 불완전 디버깅. 비정상적인 소프트웨어 수정 등등의 원인에 의해서 감소되어 실제적인 소프트웨어 테스팅 단계에서는 적당하지 않을 수도 있다. 이와 같이 부적당한 소프트웨어 테스팅 구간은 하나의 이상치 스테이지로 고려되어질 필요성이 있다. 이 이상치 소프트웨어 테스팅 구간에서만은 장애요인에 의해서 소프트웨어 신뢰도가개선이 되지 않는다고 가정한다. 이와 같은 가정아래서본 연구에서는 우선 소프트웨어 신뢰도 성장 모형에서 가장 많이 활용되는 Jelinski-Moranda모델을 변경하여 하나의 미지정된 이상치 소프트웨어 테스팅 구간을 고려하여 베이지안 방법에 의한 소프트웨어 신뢰도를 모형화하고 그 모형에 따른 소프트웨어 신뢰성 측도들을 추정하는 절차를 연구하였다. 그리고 제곱오차 결손함수의 조건아래 사전정보를 가정한 소프트웨어 신뢰도 모수의 베이즈 추정량을 제안하고, 제안된 소프트웨어 신뢰도 성장 모델을 하나의 이상치 소프트웨어 테스팅 구간상에 고려된 장애 모수의 값에 따라서 정확성, 바이어스, 추세 및 노이즈 등의 정량적인 평가 측도들을 사용하여 컴퓨터 시뮬레이션을 통하여 평가하였다.7배 높은 것으로 나타났다. 국내 건강기능식품공전 중 클로렐라 및 스피루리나제품의 엽록소 a b, 및 페오포르바이드 항목의 규격검사를 본 연구의 동시분석법으로 개정함으로써 각 성분 함량의 정량, 분석시간의 단축 및 비용절감 둥 시험방법을 크게 개선할 수 있을 것으로 기대된다. 잔주름 개선에 효과를 볼 수 있을 것으로 생각된다.른 Phenoxyethanol의 유/수 분배 측정 결과, Polarity가 낮은 oil에서는 $70\%$ 이상의 Phenoxyethanol이 수상에 존재한 반면, polarity가 높은 oil에서는 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며

  • PDF