• Journal of The Geomorphological Association of Korea
• /
• v.18 no.2
• /
• pp.65-80
• /
• 2011

This is to find out geomorphological environment of optimum location for the object of dwelling site of Bronze Age (hereinafter called dwelling site) of total 177 unit confirmed in Yongducheon basin and Onyangcheon basin (hereinafter called investigation-object basin) in Asan-si Chungnam. To do this, hill of investigation-object basin where dwelling sites were confirmed was divided into 11 units of hillslope geomorphological and this was combined with the grade of 5 units of gradient and again subdivided into total 55 units of micro-landforms of Hillslope. Based on this, in the viewpoint of 'gradient of each of micro-landforms' analyzed 'number of dwelling sites' and 'dwelling site distribution density (unit: number of dwelling sites/1000m2)'. As the result, the optimum geomorphological environment where dwelling sites were located was largely confirmed be 5 units(① semi-gentle slope land of crest slope ②gentle slope land of crest slope ③ slope of upper sideslope ④ flat land of crest slope ⑤ flat land of crest flat). It is thought that this analysis data will be used in the future as basic data for the study of predicting distribution of dwelling sites in Bronze Age which might have been buried in the investigation-object basin.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.324-329
• /
• 2001

Sediment yields from the reservoir watershed areas and raising of the spillway crest for the agricultural reservoir capacity enlargement were investigated and analysed through the 21 pilot reservoirs, have irrigated areas 200has. and over in the Kyoungpook province. In these studies, (1), the correlation analysis between various watershed characteristics and annual specific sediment yields were derived and (2), the excess effective reservoir capacity of the over 0.5m above the spillway crest could be estimated. In brief, catchment area should strongly be correlated with the annual specific sediment yields (R=0.90), the other side, average slope of the main stream is less than catchment area. The excess effective capacity of reservoir enlargement by the raising of spillway crest at 0.5m-height was resulted 12.1% of increasing capacity compare with the original reservoir capacity.

• The Korean Journal of Quaternary Research
• /
• v.25 no.2
• /
• pp.25-37
• /
• 2011

The purpose of this study is to assume the particular area of hills where it is highly possible for historical site to be buried in the viewpoint of geomorphology and based on this to suggest excavation-recommended area. Namely, this writer is to understand the dwelling site type of ancient people who had resided there at that time for the object of 'Ohnju region urban development business site' (referred as investigation area hereinafter) and considering the characteristics of micro-landform of hills which are distributed in investigation area and is to recommend the area where it is highly possible for historical site to be buried. The result of analysis is like the following. (1) Dwelling site types of ancient people who might have resided in the whole area of investigation region are discovered to be largely 'low hills+wetland' of Type-I and 'alluvial fan(or river terrace+wetland' of Type-II. (2) In investigation area if the area which has high possibility of distribution of historical site namely, excavation-recommended area is looked as based on micro-landform unit of hills, they are Crest slope and Crest flat. Individual area ratios which Crest slope and Crest flat occupies in investigation area are 12.9% and 10.2% respectively and the rankings are 3 and 6 each. And excavation-recommended areas in valley plain(or bottomland) of investigation area are in the vicinity of 'distal end' or 'buried distal end'of small scale alluvial fan.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.200-208
• /
• 2012

Surge overflow may cause damage on earthen levees. Levee strengthened on the levee crest and landward-side slope can provide protection against the erosion damage induced by surge overflow. In this paper, surge overflow of a roller compacted concrete RCC strengthened levee was studied in a purely Lagrangian and meshless approach, the smoothed particle hydrodynamics (SPH) method. After verifying the developed model with analytical solution and comparing the results with full-scale experimental data, the roughness and erosion parameters were calibrated. The water thickness, flow velocity, and erosion depth at crest, landward-side slope and toe were calculated. The characteristics of flow hydraulics and erosion on the RCC strengthened levee are given. The results indicate that the RCC strengthened levee can resist erosion damage for a long period.

• Coupled systems mechanics
• /
• v.1 no.1
• /
• pp.59-78
• /
• 2012

The available analytical methods of analysis for laterally loaded piles in level ground cannot be directly applied to such piles in sloping ground. With the commercially available software, the simulation of the appropriate field condition is a challenging task, and the results are subjective. Therefore, it becomes essential to understand the process of development of a user-framed numerical formulation, which may be used easily as per the specific site conditions without depending on other indirect methods of analysis as well as on the software. In the present study, a detailed three-dimensional finite element formulation is presented for the analysis of laterally loaded piles in sloping ground developing the 18 node triangular prism elements. An application of the numerical formulation has been illustrated for the pile located at the crest of the slope and for the pile located at some edge distance from the crest. The specific examples show that at any given depth, the displacement and bending moment increase with an increase in slope of the ground, whereas they decrease with increasing edge distance.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.90-95
• /
• 2004

During the past 50 years methods for predicting wave overtopping of coastal structures have coastal structures have continuously been developed Wave overtopping is one of the most important processes for the design of seawalls. The term 'wave overtopping' is used here to refer to the processes where waves hit a sloping structure run up the slope and, if the crest level of the slope is lower than the highest run up level, overtop the structure. Wave overtopping is dependent on the processes associated with breaking wave. The Numerical model is based on Navier-Stokes equation and Marker-Density Function of method for nonlinear free-surface flow by Miyata & Park(1995). The influence of how the slopes of seawalls, wave type and crest freeboard affect overtopping discharges has been investigated. The research of study using the new development nonlinear free-surface flow numerical model SOLA-VOF are presented.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.427-439
• /
• 2012

In this study, an experiment with large-scale model was performed according to raising embankment in order to investigate the behaviour of failure due to overtopping. The pore water pressure, earth pressure and settlement by high water level, a rapid drawdown and overtopping were compared and analyzed. Also, seepage analysis and slope stability analysis were performed for steady state and transient conditions. The pore water pressure and earth pressure for inclined core type showed high value at the base of the core, but they showed no infiltration by leakage. The pore water pressure and earth pressure by overtopping increased at the upstream slope and core, it is considered a useful data that can accurately estimate the possibility of failure of the reservoir. The behavior of failure due to overtopping was gradually enlarged towards the downstream slope from reservoir crest, and the inclined core after the raising embankment was influenced significantly to prevent the reservoir failure. The pore water pressure distribution for steady state and transient condition showed positive (+) pore water pressure on the upstream slope, it was gradually changed negative (-) pore water pressure on the downstream slope. The pore water pressure by overtopping showed a larger than the high water level at the downstream slope, it was likely to be the piping phenomenon because the hydraulic gradients showed largely at the inclined core and reservoir crest. The safety factor showed high at the steady state, and transient conditions did not show differences depending on the rapid drawdown.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.213-219
• /
• 2003

As the 2-D hydraulic experimental results for the submerged rubble-mound structure, we have concerned with their stability/function characteristics of structures by the effects of wave force, scour/deposition at the toe and wave transmission ratio at the lee-side sea. And as to investigate the variation characteristics of wave transmission ratio which depended to a geometrical structure of the submerged breakwater profiles, the critical conditions for the depth of submergence and crest width obviously presented. In summary, there results lead us to the conclusions that the wave control capabilities of submerged breakwaters by the variation of the submergence depth is high about 4 time degrees at the efficiency than the that of crest width. The destruction of covering block at the crest generated at the region which located between maximum damage curve, it maximum damage/failure station from the toe of the structure were 0.2L. As the wave transmission coefficient and the slope of the structure increase, the damage/failure ratio and the maximum scour depth at the toe was extended, respectively. When maximum scour depth happened. The destruction of covering block which located at the toe generated at the front slope destruction. Finally, it was found from the results that the optimization of structure may be obtained by the efficiently decision of the submergence depth and crest width in the permissible range of wave transmission ratio.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.961-969
• /
• 2016

Due to the recent requirement of installing low-head structures considering environmental aspects, various types of fixed weir have been suggested. However, the design guideline of transverse structures for practical application is very limited. The purpose of the present study is to analyze the hydraulic properties of the fixed weirs installed at the small and middle sized rivers of Korea depending on the physical specifications to provide fundamental data that may be reflected to the design of a low-head fixed weir considering the relevant environmental aspects. The basic discharge coefficient of slope-type and step-type weirs depending on change of crest was estimated, and a stage-discharge curve was developed. In addition, the flow properties under free flow and submerged flow conditions were analyzed by varying the hydraulic conditions such as discharge and crest.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.397-404
• /
• 2010

Laboratory tests of wave overtopping rates for a rubble mound breakwaters armoured Tetrapod were carried out, with varying design waves, crest berm widths and crest freeboards. The objective of this study is to investigate overtopping performance and to examine the characteristics of the widely used overtopping prediction models through the results of laboratory tests. Laboratory tests show that structure slope and wave periods have a considerable influence on overtopping rates, but the difference of overtopping rates related to crest berm widths is slight. Owen(1980)'s prediction considerably overestimates compared to the measured valued. Prediction of Van der Meer et al.(1998) underestimates only for steep slope($cot{\alpha}$=1.5). Besley(1999)'s and Pedersen(1996)'s predictions have a relatively good agreement with the measured results for slopes with a broader crest berm width. In general, best agreement between measured and predicted overtopping rates is observed using modified Pedersen(1996)'s formula for all test conditions.