• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.54-61
• /
• 2002

Inconel 690 alloy has widely been used in power plant and high temperature facilities because it has high thermal resistance and toughness. But we have little design data about the creep behaviors of the alloy. Therefore, in this study, an apparatus has been designed and built for conducting creep tests under constant load conditions. A series of creep tests on Inconel 690 alloy have been performed to get the basic design data and life prediction of inconel products and we have gotten the following results. First, the stress exponents decrease as the test temperatures increase. Secondly, the creep activation energy gradually decreases as the stresses become bigger. thirdly, the constant of Larson-Miller Parameters on this alloy is estimated about 10. And last the fractographs at the creep rupture show both the ductile and the brittle fracture according to the creep conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.248-253
• /
• 2003

Titanium alloy has widely been used as glasses rim material because it has high specific strength and also is light, harmless to men. But, we have little design data about the creep behaviors of the alloy. Therefore, in this study, an apparatus has been designed and built for conducting creep tests under constant load conditions. A series of creep tests on them have been performed to get the basic design data and life prediction of titanium products and we have gotten the following results. First, the stress exponents decrease as the test temperatures increase. Secondly, the creep activation energy gradually decreases as the stresses become bigger. Thirdly, the constant of Larson-Miller parameters on this alloy is estimated about 13. And last, the fractographs at the creep rupture show both the ductile and the brittle fracture according to the creep conditions.

• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.157-162
• /
• 2011

발전설비 및 자동차의 엔진에서 고온과 응력이 발생하므로 안전을 위하여 제품을 생산하기 전에 재료의 수명설계가 필요하다. 본 연구에서는 온도, 응력, 파단 시간으로 이루어진 무기력계수를 이용하여 수명설계를 수식화하였다. 통합수명식을 이용하여 SP-Creep 시험 데이터와 계산된 데이터를 비교하였다. SP-Creep 시험은 X20CrMoV121강의 파단시간을 획득하기 위하여 수행하였고 수명설계식을 통해 하중, 온도, 하중-온도가 작용하는 3가지 경우를 고려하였다. 첫째로, 무기력계수는 SP-Creep 시험에서 획득한 파단응력과 시간에 의해 계산하였다. 두 번째로, 온도 조건을 주어 수명을 예상하였다. 세 번째로, 부재는 피로와 크리프가 동시에 작용할 때 커플링 효과 때문에 더 열악한 상태에 놓이게 된다. 수명은 커플링 효과 때문에 현저하게 감소하는 것으로 나타났다.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2837-2845
• /
• 1994

Several methods have been developed to predict on the remaining life of the old power plants. However, Larson-Miller parameter, one of existing creep life prediction methods, has not reflected the effect of material degradatioin and grain size. So this study has been carried out to research the effects of material degradation and austenite grain coarsening on the life prediction of 3.5Ni-Cr-Mo-V steel. An experimental result shows that carbide coarsening has no significant effects on the creep rupture life and the Larson-Miller parameter, but grain coarsening has an important influence on the creep ruptrure life and the Larson-Miller parameter. Therefore Larson-Miller constant, K should be determined to consider on the chemical composition and the grain size of materials.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.6-10
• /
• 2013

The Heat Recovery Steam Generator(HRSG) is a device recycling the exhaust gas of gas turbine in combined power and chemical plants. Since service temperatures was very high, the damage of HRSG tubes intensively occurred in superheater and reheater. The aim of this paper is to determine life and hardness relationship that addresses creep-rupture test and creep-interrupt test in modified 9Cr-1Mo steel. The measured life that consists of function of hardness was found to constant tendency.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.153-158
• /
• 2005

Titanium alloy has widely been used as material for automotive parts because it has high specific strength. It is also light and harmless to human body. But, we have little design data about the creep behaviors of the alloy. Therefore, in this study, creep tests under four constant stress conditions have been conducted with low different temperature conditions. A series of creep tests had been performed to get the basic design data and life prediction of titanium products and we have gotten the fallowing results. First, the stress exponents decrease as the test temperatures increased. Secondly, the creep activation energy gradually decrease as the stresses became bigger. Thirdly, the constant of Larson-Miller parameter on this alloy was estimated as about 7.5. And for the last, the fractographs at the creep rupture showed the ductile fracture due to the intergranullar rupture.

• 소성∙가공
• /
• 제18권4호
• /
• pp.347-353
• /
• 2009

The apparent activation energy, the applied stress exponent, and rupture life have been measured from creep experiments over the range of $200^{\circ}C$ to $220^{\circ}C$ and the applied stress range of 64MPa to 94MPa. The materials were used AZ31 magnesium alloys treated by plasma electrolytic oxidation of $20{\mu}m$ and $40{\mu}m$ at surface to investigate the its influence on creep behavior, and creep tests were carried out under constant applied stress and temperature. The experimental results showed that the dipper the thickness of surface treatment the higher the activation energy and stress exponent. And the higher temperature and applied stress, the lower stress exponent and activation energy, respectively. Also the dipper the thickness of surface treatment the longer creep rupture time.

• 한국재료학회지
• /
• 제3권6호
• /
• pp.575-584
• /
• 1993

주조용 Ni기 초내열 합금인 Rene 80의 고온 크리프타단시 균열의 생성과 전파에 대한 분위기의 영향을 조사하기 위해 $760^{\circ}C$, 675MPa및 $982^{\circ}C$, 157MPa의 크리프시험 조건에서 산화성 분위기인 공기중과 불활성 분위기인 아르곤 가스 분위기에서 크리프 파단시험을 했다. $760^{\circ}C$, 657MPa조건의 크리프 파단시험에서는 분위기에 따라 크리프 파단 양상의 큰 차이가 없었고 파단수명과 파단연신값도 비슷하였다. 반면 $982^{\circ}C$, 157MPa의 시험에서는표면산화의 영향으로 공기중의 경우 표면균열 생성과 입계를 통한 균열전파에 의하여 크리프 파단이 진행되었으나, 아르곤 분위기에서는 내부입계에서 균열이 생성되어 표면에서 발생된 균열과 합체됨으로서 파단이 진행되었다. 파단수명은 공기중의 경우가 치밀한 표면산화물의 형성에 따라 아르곤 하에서 보다 길었으며 파단연신은 아르곤 분위기의 경우가 네킹 발생에 따라 크게 나타났다.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.203-208
• /
• 2004

To make practical applications of Al-Zn-Mg ternary aluminum alloy effectively in various field, a series of static creep tests under the 16 temperature-stress combination conditions had been performed. The creep tester with constant stress loading was designed and made by the authors and used in this study. The higher the creep temperature rose, the less the stress exponents became. The bigger the applied stresses became, the less values the creep strain activation energy showed. The life prediction constant of Larson-Miller parameter was calculated as about 2.3. In the fractography, the ductile fracture with dimples by intergranular breakage was primarily observed. We can make practical use of these test data in the design, the life prediction and the prevention of the accidents of the thermal facilities, etc.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1833-1840
• /
• 2000

Commercially pure copper is tested to obtain creep curves at 2500C. Constitutive relations adopting continuum damage mechanics concept is found to be appropriate to model the creep defor mation up to the tertiary stage. Microscopic observation by SEM reveals that creep condition induces cavities and microcracks subsequently. The constitutive equations along with evaluated creep parameters are implemented into finite element analysis code. The analysis reproduces creep curves under step loading as well as constant loading with reasonable accuracy. Distribution and evolution of damage under creep loading are numerically simulated for two different types of notched specimen. Predicted creep life agrees quite well with rupture test results. The influence of mesh size at notch tip on rupture time prediction is studied, and a degree of refinement is suggested for the specific notched specimens.