Browse > Article

Creep Behaviours of Inconel 690 Alloy  

황경충 ((주)은일 기술연구소)
윤종호 (경일대학교 공과대학 기계공학부)
최재하 (충북대학교 공과대학)
김성청 (충북대학교 공과대학)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.11, no.4, 2002 , pp. 54-61 More about this Journal
Abstract
Inconel 690 alloy has widely been used in power plant and high temperature facilities because it has high thermal resistance and toughness. But we have little design data about the creep behaviors of the alloy. Therefore, in this study, an apparatus has been designed and built for conducting creep tests under constant load conditions. A series of creep tests on Inconel 690 alloy have been performed to get the basic design data and life prediction of inconel products and we have gotten the following results. First, the stress exponents decrease as the test temperatures increase. Secondly, the creep activation energy gradually decreases as the stresses become bigger. thirdly, the constant of Larson-Miller Parameters on this alloy is estimated about 10. And last the fractographs at the creep rupture show both the ductile and the brittle fracture according to the creep conditions.
Keywords
Inconel; Creep Rate; Rupture Stain; Creep Rupture; SEM; Life Prediction; Activation energy;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Design of Apparatus for Constant Stress or Constant Load Creep Tests /
[ F.Garofalo;O.Richmond;W.F.Domis ] / Trans.of ASME,Series D,J.of Basic Engineering   DOI
2 A Linear Time-Temperature Relation for Extrapolation of Creep and Stress Rupture Data /
[ S.S.Manson;A.M.Haferd ] / NASA-TN-2890
3 Influence of Microstructural Instabilities on Elevated Temperature Creep Deformation of Inconel 690 /
[ V.Venkatesh;H.J.Rack ] / Materials Science and Technology   DOI
4 Creep in Type 316 Stainless Steel /
[ D.G.Morris ] / Acta Met.   DOI   ScienceOn
5 Elevated-Temperature Low-Cycle Fatigue Behaviour of Different Heats of Type 304 Stainless Steel /
[ P.S.Maiya;S.Majumdar ] / Met.Trans.
6 /
[ J.H.Dorn ] / The Mechanical Behaviour of Materials at Elevated Temperature
7 합금과 스테인레스 강의 마찰용접 특성 연구 /
[ 김의환;민택기 ] / 한국공작기계학회 논문집   과학기술학회마을
8 Heat Treating in Vacuum Furnaces and Auxiliary Equipment /
[ R.Byrnes.Jr;R.C.Anderson ] / Metals Handbook(9th Ed.)
9 인코넬 690 합금의 절삭성에 관한 연구 /
[ 황경충;윤종호;최재하;김성청 ] / 한국공작기계학회논문집   과학기술학회마을
10 0.6 Tm 온도영역에서의 인코넬 718에 대한 싸이클크리프 특성에 관한 연구 /
[ 최인식 ] / 한국과학기술원 석사논문
11 인코넬 합금의 기계적 특성 평가(인코넬 합금개발) /
[ 홍순영;김희영;류석현;심무경;윤종문 ] / KAERI/CM-081
12 /
[ F.Garofalo ] / Fundamentals of Creep and Creep-Rupture in Metals
13 Internal Stresses and Structures Developed During Creep /
[ L.J.Cuddy ] / Met.Trans.   DOI
14 On the Viscous Flow in Metals and Allied Phenomena /
[ E.N.da C.Andrade ] / Proc.Roy.Soc.Series A   DOI
15 The Growth of Grain Boundary Cavities during High Temperature Fatigue /
[ R.P.Skelton ] / Phil.Mag.   DOI
16 STS 316 의 시효 처리와 크리프 거동 측정 /
[ 임지우;임병수 ] / 한국공작기계학회지   과학기술학회마을
17 Fatigue Perturbed Creep of Pure Aluminum at Ambient Temperatures /
[ W.L.Bradley;S.W.Nam;D.K.Matlock ] / Met.Trans.