• Journal of the Korean Home Economics Association
• /
• v.25 no.1
• /
• pp.11-18
• /
• 1987

The purpose of this study was to investigate the crease recovery and the elastic recovery as a function of the direction of plain woven fabrics. The crease recovery was measured by Mosanto's Method and the elastic recovery was investigated by Autograph for ten kinds of plain woven fabric samples. The results were as follows; 1. Values of crease recovery were in the order of bias>weft>warp. 2. The lengthening of recovery time had a little effect on crease recovery. 3. The directions of crease recovery were affected by that of thread twist. 4. The linearity was shown between total crease recovery and warp-weft crease recovery. 5. The linearity was found between crease recovery and elastic recovery in the fabrics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.905-911
• /
• 2007

In this paper, geometrically and materially non-linear finite element analyses were performed to study the crease behavior of thin membranes. The cross-section of the membrane was modeled with 2-dimensional plane strain elements. To simulate the creasing process, the membrane mesh was folded, compressed to prescribed crease gauge by activating two rigid contact surfaces, and then released to give the crease topology. Various crease gauges were considered to investigate the effect of crease intensity on the initial deployment angle. The crease geometry was also obtained by experiments and the results were compared.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.32-40
• /
• 2007

In this paper, the crease extraction method is proposed to improve the accuracy of feature extraction within the fingerprint image. First of all, for each pixel in fingerprint image, it calculates the average grey level and variance to determine if the current pixel composes the crease, and estimates the direction of crease. Secondly, once the direction of every pixel in crease candidate area is estimated, it is decomposed into 8 different images, depending on their direction. The properties of crease consists of the length of the crease candidate area, the correspondence between the crease direction and the pixel distribution direction, the difference between the ridge direction and the pixel distribution direction, and finally the grey level of the candidate pixels. The proposed method finally extracts the crease from the crease clusters estimated from directional images. In conclusion, applying the proposed method improved the accuracy of overall feature extraction by 91.4% by accurately and precisely extracting the crease from fingerprint image.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.90-97
• /
• 2007

For a highly reliable fingerprint recognition system, the precise and accurate feature extraction is indispensable. In this paper, We propose a highly efficient crease extraction method, which can improve the accuracy of feature extraction within the fingerprint image. The proposed method applies the 1-dimensional directional slit for each pixel in fingerprint image. And then it calculates the average grey level and variance to determine whether the current pixel composes the crease, and estimates the direction of crease. Once the direction of every pixel in crease candidate area is estimated, it is decomposed into 8 different images depending on their direction. From the 8 directional images, the crease clusters are estimated by utilizing the property of crease area. The proposed method finally extracts the crease from the crease clusters estimated from directional images. In conclusion, the proposed method highly improved the accuracy of overall feature extraction by accurate and precise extraction of the crease from fingerprint image.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.483-489
• /
• 2000

The purpose of this study is to verify the effect of cellulase treatment on crease resistance of cotton. Cotton fabrics was treated with cellulase under different concentration at $50^{\circ}C$ for 40 min. Also to compare the effect of DMDHEU treatment, DMDHEU treatment was conducted before and after cellulase treatment, also with cellulase. Weight loss, crease resistance and tentile strength of each samples were measured and compared. Maximum weight loss showed at 1g/l con. with 40 min. treatment. Cellulase enzyme treatment was more effective than DMDHEU in the crease resistance and tensile strength. Crease resistant of cotton which treated under different condition with cellulase and DMDHEU showed in the order of cellulase+DMDHEU> cellulase> DMDHEU treatment. Also, tensile strength showed in the order of cellulase> cellulase+DMDHEU> DMDHEU. Among those treatment conditions, condition which treated with cellulase considered more effective to increase crease resistance while keeping tensile strength too.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.259-267
• /
• 1989

In this paper, the fabric specimen undergoes repeated laundering under given condition. After this cyclic laundering was applied, the crease recoveries of the specimen were measured using shirley crease revovery tester in order to evaluate the effect of factors at given condition during crease deformation. 5 samples of grey plain cloth were desized, alkali-scoured, bleached, whased with water, and air-dried. All tests were made on samples preconditioned to $65\%\;RH\;and\;20^{\circ}C$. The experimental results were analysed statistically to relate crease recoveries and the properties of smaples, recovery periods (time) of crease. Furthermore, the crease recoveries of core-spun yarn woven fabrics were discussed in comparison with those values for $100\%$ combed cotton yarn woven fabric and $65\%$ polyester $35\%$ carded cotton blended yarn woven fabric. The results obtained are as follows; 1. Regardless of materials, remarkable decrease are observed in crease recoveries about 1-5 cycles of the repeated laundering, but slack decrease are observed in crease recoveries after 5 cycle of the re-peated laundering. 2. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to recovery periods (t) of crease as follows; log$\alpha$=0.01415 log t+2.1168 ($r^2=0.94$) 3. Core-spun yarn woven fabrics were superior to $100\%$ combed cotton yarn woven fabrics and $65\%$ polyester $35\%$ carded cotton blended yarn woven fabric in crease recoveries. 4. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to cover factor (CF), thickness (T) at pressure 0.5 $gf/cm^2$, weight (W) as follows; log$\alpha$=-0.3482 log CF-0.4924 log T-0.4727 W+2.4243 ($r^2=0.88$) 5. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to 2HB/B, 2HB/W, $\sqrt[3]{B/W}$, WC/T which are concerning to formation of weared clothes and bending Iran formation behavior as follows: log $\alpha$=0.0091 2HB/B+0.4667 2HB/W+0.0185 $\sqrt[3]{B/W}$+0.0114 WC/T+1.8433 ($r^2=0.86$)

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.57-64
• /
• 2009

In this paper, We propose an highly efficient preprocessing technique for improving the performance of the crease extraction method, which can improve the accuracy of feature extraction within the fingerprint image. The proposed method applies the 1-dimensional directional slit for each pixel in fingerprint image. Once the direction of every pixel in crease candidate area is estimated, it is decomposed into different images depending on their direction. From the directional images, the crease clusters are estimated by utilizing the property of crease area. The proposed method finally extracts the crease from the crease clusters estimated from directional images.

• Archives of Craniofacial Surgery
• /
• v.22 no.6
• /
• pp.310-318
• /
• 2021

Background: Transcutaneous lower eyelid approaches are associated with a risk of postoperative scarring depending on the distance between the incision line and the lower eyelid margin. The lower eyelid crease of Caucasians corresponds to a ridge-shaped fold in young Asians. However, this relationship has not been sufficiently evaluated in the latter. The authors, therefore, investigated the location of the scar and the lower eyelid crease or ridge to find the optimal location for the incision line. Methods: This study included 60 out of 139 patients who underwent inferior orbital wall reconstruction through a lower eyelid skin incision between July 2019 and June 2020. According to the location of the scar, the patients were classified into three groups: group A (≥ 2 mm above the lower eyelid crease or ridge), group B (within the lower eyelid crease or ridge to 2 mm above the lower eyelid crease or ridge), and group C (within the lower eyelid crease or ridge to 2 mm below the lower eyelid crease or ridge). At 6 or 12 months after surgery, the Patient and Observer Scar Assessment Scale (POSAS) score was obtained, the distance between the lower eyelid margin and the scar (DMS) and the distance between the margins of the peripheral pupil and the lower eyelid (DMPE) were measured, and the occurrence of ectropion was evaluated. Results: Group B had the lowest POSAS score (A: 22.7 ± 8.0, B: 20.9 ± 2.4, C: 32.5 ± 4.1, p< 0.001). Linear regression analysis showed that the DMS was positively correlated with the POSAS score (p< 0.001) and that the risk of DMPE widening increased as the DMS decreased (p= 0.029). None of the patients had ectropion. Conclusion: When using the transcutaneous approach for inferior orbital wall reconstruction, the optimal incision site is within the lower eyelid crease or ridge to 2 mm above the lower eyelid crease or ridge.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.229-233
• /
• 2004

Andongpo, 100% Korean hemp fabric was treated with the glyoxale resin type finishing agent and/or the soluble urethane type finishing agent to determine the optimum process condition of the crease resistant finish and the crease recovery of treated sample fabrics was evaluated for the study. The treatment conditions for the study were 6 conditions, such as, A-1~A-6, in which A-1 was the condition of treatment glyoxale resin type finishing agent only and A-2~A-6 were the condition of treatment both glyoxale resin type finishing agent and soluble urethane type finishing agent. Among the 6 conditions, the crease recovery of the sample treated with A-4 condition was $148^{\circ}$(angle of recovery method) and grade 3.2(appearance method) and so, these samples showed the excellent crease recovery. From the result, 15g/l of the catalyst conc., 50g/l of the glyoxale resin type finishing agent cone., and 40g/l of the softner were the optimum treatment condition for the crease resistant finish of the andongpo.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.247-250
• /
• 2000

This paper proposes a finger crease pattern identification algorithm utilizing a clustering method. The algorithms has been developed for the use of biometric person identification system. Since the finger crease pattern may be well-imaged utilizing low cost imaging devices such as low-end CCD camera with LED lighting, the feasibility of commercialization of the algorithm and the system utilizing the algorithm may be well justified if the finger crease pattern is a reasonable choice for the biometric feature. In this paper, we exploit this possibility and show the potential of using the finger crease pattern as a feature for biometric person identification.