• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.315-324
• /
• 2002

The purpose of this in vitro study was to evaluate the efficiency of Er:YAG laser on calculus removal and the morphologic changes and hardness of the irradiated surface at different power settings. This experiment used human teeth which were extracted due to periodontal disease and had a band of calculus. Forty root slabs ($5{\times}5mm$) were made and divided into control group and irradiated groups. Experimental groups were as follows; Control group (root planing), Group1 (irradiated with laser at 30mJ), Group2 (irradiated with laser at 60mJ), Group3 (irradiated with laser at 100mJ). Twelve root slab embedded in resin block were used in each group. Er:YAG laser was applied under water irrigation with the tip held perpendicular to the root surface in contact mode. The treatment time was measured until the calculus was removed completely under naked eyes. The efficiency of calculus removal was evaluated by the time for removal. Morphological changes of laser irradiated site were observed under SEM and the surface hardness was measured using a VH tester. The results were as follows; 1. The efficiency of laser scaling was increased with increasing the energy level of irradiation(p<0.05). 2. The morphological changes such as carbonization, crater and scale-like defects in the irradiated root surface were frequently observed with increasing the energy level. 3. The surface hardness tended to increase at 60mJ and 100mJ irradiated groups than that of control group. From the results evaluting on the efficiency, morphological change and surface hardness, lower energy level was suggested for the clinical application of the Er:YAG laser in scaling.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.85-96
• /
• 2016

A series of tests were conducted to examine the filled tube shape with respect to the filling module type used and to investigate cone resistance properties of a dredged-soil-filled geotextile tube under water and drained conditions. Results based on the filling observation showed that the distribution of the accumulated fills inside the acrylic cell and vinyl tubes differs with respect to the type of filling modules. A crater formation around the inlet area was found during the test using I-type filling module and a horizontal sediment distribution was found during the test using inverse T-Type filling module. The dredged fill material was obtained from the Saemangeum area. The geotextile tube deformation of each filling stage was almost converged when the tube was fully drained. The cone resistance of the dredged fill in the geotextile tube under drained condition is large and is approximately 2~6 times that of the tube under water condition.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.1
• /
• pp.21-28
• /
• 2016

Caves can serve as major outposts for future human exploration of the Moon and Mars. In addition, caves can protect people and electronic equipment from external hazards such as cosmic ray radiation and meteorites impacts and serve as a shelter. Numerous pit craters have been discovered on the Moon and Mars and are potential entrances to caves; the principal topographic features of pit craters are their visible internal floors and pits with vertical walls. We have devised two topographical models for investigating the relationship between the topographical characteristics and the inner void of pit craters. One of our models is a concave floor void model and the other is a convex floor tube model. For each model, optical photographs have been obtained under conditions similar to those in which optical photographs have been acquired for craters on the Moon and Mars. Brightness profiles were analyzed for determining the profile patterns of the void pit craters. The profile patterns were compared to the brightness profiles of Martian pit craters, because no good-quality images of lunar pit craters were available. In future studies, the model profile patterns will be compared to those of lunar pit craters, and the proposed method will likely become useful for finding lunar caves and consequently for planning lunar bases for manned lunar expeditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.135-140
• /
• 1997

The influences of ZrB$_2$ additions to SiC on microstructural, DDM(Electrical Discharge Machining), mechanical and electrical properties were investigated. composites were prepared by adding 15, 30, 45 vol.% ZrB$_2$particles as a second phase to SiC matrix. SiC-ZrB$_2$ composites obtained by hot pressing for high temperature structural application were fully dense with the relative densities over 99%. The fracture toughness of the composites were increased with the ZrB$_2$contents. In case of composite containing 30vol.% ZrB$_2$, the flexural strength and fracture toughness showed 45% and 60% increase, respectively compared to that of monolithic SiC sample. The electrical resistivities of SiC-ZrB$_2$ composites decreased significantly with the ZrB$_2$ contents. The electrical resistivity of SiC-30vol.% ZrB$_2$ composite showed 6.50$\times$10$^{-4}$ $\Omega$.cm. Cutting velocity of EDM of SiC-ZrB$_2$ composites are directly proportional to duty factor of pulse width. Surface roughness, however, are not all proportional to pulse width. Higher-flexural strength composites show a trend toward smaller crater volumes, leaving a smoother surface; the average surface roughness of the SiC-ZrB$_2$ 15 vol.% composite with the flexural strengthe of 375㎫ was 3.2${\mu}{\textrm}{m}$, whereas the SiC-ZrB$_2$ 30.vol% composite of 457㎫ was 1.35${\mu}{\textrm}{m}$. In the SEM micrographs of the fracture surface of SiC-ZrB$_2$ composites, the SiC-ZrB$_2$ two phases are distinct; the white phase is the ZrB$_2$and the gray phase is the SiC matrix. In the SEM micrographs of the EDM surface, however, these phases are no longer distinct because of thicker recast layer of resolidified-melt-formation droplets present. It is shown that SiC-ZrB$_2$ composites are able to be machined without surface cracking.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.253-259
• /
• 2011

Boring behaviour and drilling mechanism were investigated by visual observations. In this study, of two kinds of holes (the outer and inner holes) which are formed by drilling of boring gastropod Lunatia fortunei (Naticidae), the diameters of the outer holes are broader and larger than those of the inner holes, and their holes look like the crater in shape, as seen in all valves of bivalves bored by Naticidae species. Two kinds of glands (the accessory boring gland and accessory salivary gland) on the foots of boring gastropods have been investigated. Of them, it has been confirmed that only the accessory salivary glands on the foots secreted sulphuric (acidic) components in the mucus (secretion), while the accessory boring glands on the foots did not secrete their components. In this study, we confirmed that L. fortunei possess the accessory boring gland on the foot, as seen in most species in Naticidae. Accoeding to the results of the experiment of the blue litmus paper tests of the mucus (secretions) secreted from the accessory boring gland the color of the blue litmus paper did not turn red in color because chemical components of mucus (secretion) secreted from the accessory boring gland on the foot of L. fortunei (boring gastropod) were not acidic components. It is supposed that the mucus, which is secreted from the accessory boring gland, contained gelatin-like substances or enzymes without acidic components, as already reported in Naticidae species. Therefore, these substances may be involved in softening the surface of the valves of M. veneriformis. Consequently, it is assumed thar L. fortunei bores holes through the shells of molluscs by means of following 3 methods: (1) a softening of the calcareous shells of M. veneriformis with chemical secretions (including gellatin-like substances or enzyme except for acidic components) from the accessory boring glands, (2) mechanical rasping with the radula, (3) a combination of both. In this study, particularly, acidic components, which are involved in softening the surface of the shells, are not associated with the boring mechanism of L. fortunei because chemical acidic components were not detected in the mucus (secretion), as found in Naticidae species.

• Journal of the Korean earth science society
• /
• v.28 no.4
• /
• pp.462-477
• /
• 2007

The purpose of this study is to determine the petrology of basalt and the volcanic process in the Seondol cinder cone, Seobjikoji area, eastern Jeju Island. The Seondol cinder cone is mainly composed of spatters in the lower part, pyroclastic deposits including reddish brown blocks, ashes with volcanic bombs in the middle part, and dark black scoria deposits in the upper part. The volcanic sequences suggest volcanic processes that progress through Strombolian eruption and end with Hawaiian lava effusion which breached the cinder cone northwestward and extended over northwestward as lava delta and basalt emplaced as a volcanic neck in the central part of crater in the cinder cone. The age of basalt lava flows is about $95\;{\pm}\;3\;ka$. The basalts belong to transitional basalt and show products of fractional crystallization of clinopyroxene and olivine from a parental basalt magma on the basis of variation diagram of major, trace and rare earth elements. Basalts in the region of this study are plotted at the region of within plate basalt.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.191-197
• /
• 2018

Mites in the family Ascidae are soil dwelling predators of small insects which would have potential to be used as biological control agent. In Korea, 10 genera of 24 species were recorded in the family. During the soil acarine biodiversity study, Asca bicornis Canestrini & Fanzago, 1877 was discovered from moss habitat on Muljangori craer lake 936 m alt in Hallasan mountain in Jeju which was designated as UNESCO Biosphere reserve and World herigate site. We reports this as a new record to Korean Mesostigmata fauna, and provide the morphological description. This species has morphologically characteristic as all dorsal setae nude and needle shaped, lateral caudal projection of Z4 shaped, which are different from the con-general species of A. aphidioides.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1630-1635
• /
• 2003

The deformation and fracture behaviors of a bulk amorphous metal, Zr-based one (Zr$\_$41.2/Ti$\_$13.8/Cu$\_$12.5/Ni$\_$10/Be$\_$22.5/: Vitreloy), were investigated over a strain rate range (7x10$\^$-4/～4 s$\^$-1/). The uniaxial compression test and the indentation test using 3mm-diameter WC balls were carried out under quasi-static loading conditions. As a result, at the uniaxial compressive state, the fracture stress of the material was very high (～1,700MPa) and the elastic strain limit was about 2%. The fracture strength showed a strain rate independent behavior up to 4 s$\^$-1/. Using indentation tests, the plastic deformation behavior of the Zr-based BAM up to a large strain value of 15% could be achieved, even though it was the deformation under locally constrained condition. The Meyer hardness of the Zr-based BAM measured by static indentation tests was about 5 GPa and it revealed negligible strain hardening behavior. At indented sites, the plastic indentation occurred forming a crater and well-developed multiple shear bands were generated around it along the direction of 45 degree when the indentation load exceeded 7kN. With increasing indentation load, shear bands became dense. The fracture surface of the specimen after uniaxial compressive tests showed vein-like pattern, typical morphology of many BAMs.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.63-70
• /
• 2018

The steel fiber reinforced concrete (SFRC) shows better performance under dynamic loading than conventional concrete in virtue of its good ductility. In this paper, a series of quasi-static experiments were carried out on the SFRC with volume fractions from 0 to 6%. The compressive strength increases by 38% while the tension strength increases by 106% when the fraction is 6.0%. The contact explosion tests were also performed on the ${\Phi}40{\times}6cm$ circular SFRC slabs of different volume fractions with 20 g RDX charges placed on their surfaces. The volume of spalling pit decreases rapidly with the increase of steel fiber fraction with a decline of 80% when the fraction is 6%, which is same as the crack density. Based on the experimental results, the fitting formulae are given, which can be used to predict individually the change tendencies of the blast crater volume, the spalling pit volume and the crack density in slabs with the increase of the steel fiber fraction. The new formulae of the thickness of damage region are established, whose predictions agree well with our test results and others. This is of great practical significance for experimental investigations and engineering applications.

• Journal of Periodontal and Implant Science
• /
• v.27 no.2
• /
• pp.411-424
• /
• 1997

The purpose of this study was to evaluate in vitro the effects during subgingival calculus removal using Nd:YAG laser. The study group was consisted of 30 teeth with advanced periodontal disease extracted before the start of periodontal therapy. The specimens were divided into 8 different groups : 1) untreated control 2) scaling and root planing only 3) laser treated using 150mJ/pulse, 1sec, 5sec, contact mode 4) laser treated using 200mJ/pulse, 5sec, contact mode 5) laser treated using 150mJ/pulse, 1sec, non-contact mode 6) laser treated using 200mJ/pulse, 5sec, non-contact mode 7) laser treated using l5OmJ/pulse, 1sec, contact mode with water irrigation 8) laser treated using 200mJ/pulse, 5sec, contact mode with water irrigation. All specimens were prepared for evaluation by scanning electron microscopy(SEM). Specimens from Group 2 exhibited a smear layer of scale like texture with parallel instrument tracks resulting from curet use. Specimens treated by contact mode, Group 3 and 4 featured surface changes not observed· in controls such as charring, randomly distributed pitting and crater formation, and melting down of the tooth material and calculus. Specimens treated by noncontact mode, Group 5 and 6 featured similar surface changes observed in contact mode. However, the differences between contact and non-contact groups not significant. Specimens treated by contact mode with water irrigation, Group 7 and 8 featured slight surface change compared to other groups. The results suggested that Nd: YAG laser did not completely remove the subgingival calculus but was possible the application as adjunctive method.