Browse > Article
http://dx.doi.org/10.12652/Ksce.2016.36.1.0085

A Study on the Shape and Cone Resistance of Dredged Fill in Geotextile Tube under Water and Drained Conditions  

Kim, Hyeong Joo (Kunsan National University)
Won, Myoung Soo (Kunsan National University)
Lee, Jang Baek (Kunsan National University)
Kim, Young Shin (Kunsan National University)
Publication Information
KSCE Journal of Civil and Environmental Engineering Research / v.36, no.1, 2016 , pp. 85-96 More about this Journal
Abstract
A series of tests were conducted to examine the filled tube shape with respect to the filling module type used and to investigate cone resistance properties of a dredged-soil-filled geotextile tube under water and drained conditions. Results based on the filling observation showed that the distribution of the accumulated fills inside the acrylic cell and vinyl tubes differs with respect to the type of filling modules. A crater formation around the inlet area was found during the test using I-type filling module and a horizontal sediment distribution was found during the test using inverse T-Type filling module. The dredged fill material was obtained from the Saemangeum area. The geotextile tube deformation of each filling stage was almost converged when the tube was fully drained. The cone resistance of the dredged fill in the geotextile tube under drained condition is large and is approximately 2~6 times that of the tube under water condition.
Keywords
Geotextiles tube; Dredged soil; Filling module; Cone resistance; Saemangeum;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Alvarez, Ing E., Rubio, Ramiro, Ricalde, Herbert (2007). "Beach restoration with geotextile tubes as submerged breakwaters in Yucatan, Mexico." Geotextiles and Geomembranes, Vol. 25. pp. 233-241.   DOI
2 Chu, J., Yan, S. W. and Li, W. (2012). "Innovative methods for dike construction - An Overview." Geotextiles and Geomembranes, Vol. 30, pp. 35-42.   DOI
3 Guo, W., Chu, J. and Yan, S. (2011). "Effect of subgrade soil stiffness on the design of geosynthetic tube." Geotextiles and Geomembranes, Vol. 29, pp. 277-284.   DOI
4 Hornsey, W. P., Carley, J. T., Coglan, I. R. and Cox, R. J. (2011). "Geotextile sand container shoreline protection systems: Design and Application." Geotextiles and Geomembranes, Vol. 29, pp. 425-439.   DOI
5 Lee, E. C. and Douglas, R. S. (2012). "Geotextile tubes as submerged dykes for shoreline management in Malaysia." Geotextiles and Geomembranes, Vol. 30, pp. 8-15.   DOI
6 Lee, S.-W., Sim, D. H. and Lee, Y. S. (2010). "Application of geotextile tube to construct temporary dike for dredging at Busan new port south container terminal." The fall Korean Geosynthetics Society, pp. 169-180 (in Korean).
7 Leshchinsky, Dov, Leshchinsky, Ora, Ling, Hoe I., Gilbert, Paul A. (1996). "Geosynthetic tubes for confining pressurized slurry: some design aspects." Journal of Geotechnical Engineering, Vol. 122, No. 8, pp. 682-690.   DOI
8 Oh, Y. I., Gim, J. H., Kang, J. G. and Jee, S. H. (2007a). "Case history of temporary embankment design using geotextile container and tube (Pasir Panjang Terminal Reclamation Project, Singapore)." The Fall Korean Geosynthetics Society Conference, pp. 211-220 (in Korean).
9 Oh, Y. I., Shin, E. C. and Kang, J. G. (2006). "Stability behavior of geotextile tube composite structure by slope stability and 2-D limit equilibrium analysis." Journal of the Korean Geosynthetics Society, Vol. 5, No. 4, pp. 11-18.
10 Oh, Y. I., Yoo, J. Y. and Kim, H. T. (2007b). "Case history of sea dyke filter construction using geotextile tube mattress." Journal of the Korean Geosynthetics Society, Vol. 6, No. 1, pp. 9-16.
11 Plaut, R. H. and Suherman, S. (1998). "Two-dimensional analysis of geosynthetic tubes." Acta Mechanica, Vol. 129, No. 3-4, pp. 207-218.   DOI
12 Plaut, R. H. and Stephens, T. C. (2012). "Analysis of geotextile tubes containing slurry and consolidated material with frictional interface." Geotextiles and Geomembranes, Vol. 32, pp. 38-43.   DOI
13 Restall, S. J., Jackson, L. A., Heerten, G. and Hornsey, W. P. (2002). "Case studies showing the growth and development of geotextile sand containers: An Australian Perspective." Geotextiles and Geomembranes, Vol. 20, pp. 321-342.   DOI
14 Saathoff, F., Oumeraci, H. and Restall, S. (2007). "Australian and German experiences on the use of geotextile containers." Geotextiles and Geomembranes, Vol. 25, pp. 251-263.   DOI
15 Shin, E. C. and Oh, Y. I. (2003a). "Behavior of geotextile tube by plane strain analysis and 3-dimension finite element method." Journal of the Korean Geotechnical Society, Vol. 19, No. 5, pp. 233-241 (in Korean).
16 Shin, E. C. and Oh, Y. I. (2007). "Costal erosion prevention by geotextile tube technology." Geotextiles and Geomembranes, Vol. 25, pp. 264-277.   DOI
17 Shin, E. C., Kim, S. H. and Oh, J. Y. (2010). "Case history of construction geotextile tube method in Korea - the problem and solution." The fall Korean Geosynthetics Society Conference, pp. 135-147 (in Korean).
18 Shin, E. C. and Oh, Y. I. (2002). "Behavior and shape variation of geotextile tube by pilot scale field tests." Journal of the Korean Society of Civil Engineers, Vol. 22, No. 6-C, pp. 661-671 (in Korean).
19 Shin, E. C. and Oh, Y. I. (2003b). "Characteristic analysis of detached breakwater type geotextile tube by hydraulic model tests." Journal of the Korean Society of Civil Engineers, Vol. 23, No. 1C, pp. 23-33 (in Korean).
20 Sung, H. J., Kim, H. J. and Ko, J. H. (2013). "Analysis on geotextile tube construction cases in the domestic and international for the development of road embankment technology utilizing dredged soil." The Spring Korean Geosynthetics Society Conference, pp. 13-16 (in Korean).
21 Won, M. S., Lee, J. B., Kim, K. J. and Kim, H. J. (2013). "A study of geotextile seam strength." The Fall Korean Geosynthetics Society Conference, pp. 53-56 (in Korean).