• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.69-74
• /
• 2023

The paper presents the results investigating the effect of aircraft engine impact location on the intended function evaluation results of spent nuclear fuel transport cask. As a result of the investigation, it is found that the structural integrity is maintained as the maximum accumulated equivalent plastic strain is below the acceptable criterion regardless of the collision location. It is identified that when the aircraft engine collided with the upper part of the transport cask without considering impact limiter the containment performance is weakened compared to when the aircraft engine collided with the central part.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2008

The side collision reconstruction algorithm is developed using three dimensional car crash analysis. Medium size passenger car is modeled for finite element analysis. Total 24 side collision configurations, four different speed and six different angle, are set up for making side collision database. Deformation index and degree index are built up for each collision case. Deformation index is a kind of deformation estimate averaging displacement of side door of crashed car from finite element analysis result. Angle index is constructed measuring deformed angle of crashing car. There are two kinds of angle index, one is measured at driver's side and the other is measured at passenger's side. Also a collision analysis information in side of cars is used for giving a basis for scientific and practical reason in a reconstruction of the car accident. The analysis program, LS-DYNA3D is utilized for finite element analysis program for a collision analysis. Those database are used for side collision reconstruction. Side collision reconstruction algorithm is developed, and applied to find the collision conditions before the accident occurs. Three example collision cases are tried to check the effectiveness of the algorithm. Deformation index and angle index is extracted for the case from the analysis result. Deformation index is compared to the established database, and estimated collision speed and angle are introduced by interpolation function. Angle index is used to select a specific collision condition from the several available conditions. The collision condition found by reconstruction algorithm shows good match with original condition within 10% error for speed and angle. As a result, the calculation from the reconstruction of the situation is reproducing the situation well. The performance in this study can be used in many ways for practical field using deformation index and degree index. Other different collision situations may be set up for extending the scope of this study in the future.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.98-104
• /
• 2012

Current [Guideline for Installation and Management of Sidewalks and Safety Facilities on Roads] suggests that the types of curbs should be Barrier curb ($85^{\circ}$). Although Barrier curbs ($90^{\circ}$) were not specified in the guideline. The curbs installed on the roads currently are Barrier curbs ($90^{\circ}$) which are not specified in the installation standard. Therefore, it is critical to prepare for the installation standard of curbs by researching types of curbs and driving safety. This research have assessed the driving safety throughout Full Scale Crash Test according to type of curbs (Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$)). Barrier curbs ($90^{\circ}$) showed higher figure in Theoretical head Impact Velocity, Post-impact Head Deceleration, Vehicle Damage when Crash, Passenger's Wounds Severity, and every other items than Barrier curbs ($85^{\circ}$). Barrier curbs ($85^{\circ}$) were found to have better Occupant Safety Index. Analysis of Behavior Using Full-Scale Crash Test showed difference depending on the Impact Condition between Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$). Generally, Barrier curbs ($85^{\circ}$) were superior than Barrier curbs ($90^{\circ}$) in terms of protecting the passengers and vehicle damages. When an impact angle increases, Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs, two types of curb showed similarity. However, if an impact of an angle decreases, Barrier Curbs ($85^{\circ}$) showed excellence in Driving Safety such as Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2010

The purpose of this study is to analyze the bumper mounting structure of passenger vehicles at low speed collision. In order to improve the repairability and damageability of the vehicle, the low speed crash tests of RCAR(Research Council for Automobile Repairs) standard(front & rear 15km/h 40% offset crash test) were carried out for analysis of 3 different types of bumper mounting structures. The results of experiments show that the impact energy absorbing ability of bumper stay with rectangular crash box type vehicle which is inserted into the bumper rail was superior to another two different bumper mounting structures that are applied to many passenger vehicles. In this thesis, well designed bumper mounting structure such as rectangular crash box type can enhance the safety of occupants as well as contribute to reduce repair cost at low collision accident by improving repairability and damageability of vehicle.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2011

Recent advancement in traffic surveillance systems has allowed the researchers to obtain more detailed vehicular movement such as individual vehicle trajectory data. Understanding the characteristics of interactions between leading and following vehicles in the traffic flow stream is a backbone for designing and evaluating more sophisticated traffic and vehicle control strategies. This study proposes a methodology for estimating rear-end crash potential, as a probabilistic measure, in real-time based on the analysis of vehicular movements. The methodology presented in this study consists of three components. The first predicts vehicle position and speed every second using a Kalman filtering technique. The second estimates the probability for the vehicle's trajectory to belong to either 'changing lane' or 'going straight'. A binary logistic regression (BLR) is used to model the lane-changing decision of the subject vehicle. The other component calculates crash probability by employing an exponential decay function that uses time-to-collision (TTC) between the subject vehicle and the front vehicle. The result of this study is expected to be adapted in developing traffic control and information systems, in particular, for crash prevention.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.294-299
• /
• 2010

ELT(Emergency Locator Transmitter) is used to send distress signal in the event of an aircraft crash. It is very useful but the ELT may transmit wrong signal caused by misjudging between crash and hard-landing. The reason of this problem is the low accuracy of the mechanical G-switch currently in use. To improve the ELT, we developed an ELT system using the MEMS(Micro Electro-Mechanical Sensor) accelerometer. The ELT system consists of acceleration data acquisition/analysis system, program of crash recognition, and GPS receiving system for the position information of an aircraft crash site. A free-drop table was developed for verification of the ELT system. The free-drop table was designed to replicate the acceleration and the pulse duration of the hard landing and the crash. By using the free-drop table, we showed that the ELT system performed well.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.115-126
• /
• 2009

This paper studied on the application of the crashworthiness regulations of Korean Railway Safety Law and Urban Transit Safety Law to the urban Maglev vehicle of KIMM. The Urban Maglev vehicle has to comply with the crashworthiness regulations for urban transit vehicles. The collision load cases have been simulated by using explicit finite element analysis. From the numerical results, the crashworthiness regulations of the Urban Transit Safety Law were completely satisfied, but maximum crash pulse requirement in 25 km/h crash event and no plastic deformation requirement in 10 km/h crash event in the Korean Railway Safety Law were not. If a commercial urban Maglev vehicle is developed in the near future, it is necessary that some soft buffing and energy absorbing devices are adopted in its front end so as to satisfy the crashworthiness regulations of the Korean Railway Safety Law.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.590-595
• /
• 2007

It is important to predict the collision behavior of a train consist to improve its crashworthiness. To analyze crash behavior of train, four kinds of methods are mainly used so far. The first is method using multibody dynamics to predict the gross motion of the train set. The second uses 3D FE model to apply the section analysis method in order. The third is used to deduce design specification and evaluate the crashworhiness of a train by using 1D model. The last is to constitute 2D model to check overriding and coupling devices. The train evaluation procedures are so complex that it is difficult to understand or deal with. In this study, VTM for railway train was introduced to simplify the procedures. VTM involves 3D models, 1D models and dynamic components such as suspension and coupling. The method using hybrid concept model makes it possible to do all the things that are mentioned above. To analyze crash behavior tendency of VTM, the model was simulated and the simulation results were discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.91-98
• /
• 2004

This paper is concerned with crash analysis for an auto-body member with the forming effect. Auto-body members such as a front frame assembly are fabricated with sheet metal forming processes that induce forming histories such as the plastic work hardening and non-uniform thickness distribution. Numerical simulation is carried out with LS-DYNA3D in order to identify the forming effect on the crashworthiness. The crash analysis of the front frame assembly with the forming effect leads to a different result from that without the forming effect. Crashworthiness such as the load-carrying capacity, the crash mode and the energy absorption are calculated to investigate and identify the forming effect. It is fully demonstrated that the design of auto-body members needs to consider the forming effect for accurate assessment of the load-carrying capacity and the deformation mechanism of the formed members.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.756-761
• /
• 2007

This papered is concerned with the crashworthiness characteristics analysis of the non-step bus when it is crashed or roll-over analysis. Computer simulations is implemented using LS-Dyna explicit code which can effectively analysis dynamic response with the lapse of time. We construct a FEM model of the non-step bus under development according to the safety rules used in Europe for composite non-step buses. The crash energy and absorption rate are evaluated to understand crashworthiness characteristic of the composite non-step bus. Body deformation is also examined whether the survival space is secured for passengers.