• The korean journal of orthodontics
• /
• v.39 no.3
• /
• pp.136-145
• /
• 2009

Objective: CBCT has become popular for orthodontic diagnosis and treatment planning in recent times. The 3D pharyngeal airway space needs to be analysed using a 3D diagnostic tool. The aim of this study was to analyse the pharyngeal airway of different craniofacial morphology using CBCT. Methods: The sample compromised 102 subjects divided into 3 groups (Class I, II, III) and 6 subgroups according to normal or vertical craniofacial patterns. All samples had CBCT (VCT, Vatech, Seoul, Korea) taken for orthodontic treatment. The pharyngeal airway was assessed according to the reference planes: aa plane (the most anterior point on the anterior arch of atlas), $CV_2$ plane, and $CV_3$ plane (most infero-anterior point on the body of the second & third cervical vertebra). The intergroup comparison was performed with one-way ANOVA and duncan test as a second step. Results: The results showed the pharyngeal airway and anteroposterior width of group 2 (Class II) in aa plane, $CV_2$ plane, $CV_3$ plane were significant narrower than in group 3 (Class III). There was no significant difference between vertical and normal craniofacial patterns except for the anteroposterior pharyngeal width of Group 1 (Class I) in aa plane. Conclusions: Subjects with Class II patterns have a significantly narrower pharyngeal airway than those with Class III. However there was no difference in pharyngeal airway between vertical and normal craniofacial morphology.

• The korean journal of orthodontics
• /
• v.50 no.6
• /
• pp.383-390
• /
• 2020

Objective: To investigate the distribution, side involvement, phenotype, and associated anomalies of Korean patients with craniofacial clefts (CFC). Methods: The samples consisted of 38 CFC patients, who were treated at Seoul National University Dental Hospital during 1998-2018. The Tessier cleft type, sex, side involvement, phenotype, and associated anomalies were investigated using non-parametric statistical analysis. Results: The three most common types were #7 cleft, followed by #0 cleft and #14 cleft. There was no difference between the frequency of male and female. Patients with #0 cleft exhibited nasal deformity, bony defect, and missing teeth in the premaxilla, midline cleft lip, and eye problems. A patient with #3 cleft (unilateral type) exhibited bilateral cleft lip and alveolus. All patients with #4 cleft were the bilateral type, including a combination of #3 and #4 clefts, and had multiple missing teeth. A patient with #5 cleft (unilateral type) had a posterior openbite. In patients with #7 cleft, the unilateral type was more prevalent than the bilateral type (87.0% vs. 13.0%, p < 0.001). Sixteen patients showed hemifacial microsomia (HFM), Goldenhar syndrome, and unilateral cleft lip and palate (UCLP). There was a significant match in the side involvement of #7 cleft and HFM (87.5%, p < 0.01). Patients with #14 cleft had plagiocephaly, UCLP, or hyperterorbitism. A patient with #30 cleft exhibited tongue tie and missing tooth. Conclusions: Due to the diverse associated craniofacial anomalies in patients with CFC, a multidisciplinary approach involving a well-experienced cooperative team is mandatory for these patients.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.13-25
• /
• 2020

Objective: The aim of this study was to compare the accuracy and reliability of measurements performed using two different software programs on digital models generated using two types of plaster model scanners (a laser scanner and a computed tomography [CT] scanner). Methods: Thirty plaster models were scanned with a 3Shape laser scanner and with a Flash CT scanner. Two examiners performed measurements on plaster models by using digital calipers and on digital models by using Ortho Analyzer (3Shape) and Digimodel^® (OrthoProof) software programs. Forty-two measurements, including tooth diameter, crown height, overjet, overbite, intercanine and intermolar distances, and sagittal relationship, were obtained. Results: Statistically significant differences were not found between the plaster and digital model measurements (ANOVA); however, some discrepancies were clinically relevant. Plaster and digital model measurements made using the two scanning methods showed high intraclass coefficient correlation values and acceptable 95% limits of agreement in the Bland-Altman analysis. The software used did not influence the accuracy of measurements. Conclusions: Digital models generated from plaster casts by using laser and CT scanning and measured using two different software programs are accurate, and the measurements are reliable. Therefore, both fabrication methods and software could be used interchangeably.

• Archives of Craniofacial Surgery
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2023

Background: Fibrous dysplasia (FD) is a localized bone disorder in which fibro-osseous tissue replaces the normal bone structure. Patients with craniofacial FD often present with gradual swelling, deformity, and compromised vision or hearing. We previously introduced "the core extirpation method," a novel surgical technique that is minimally invasive like traditional bone shaving but has longer-lasting effects. This study presents the long-term outcomes of our core extirpation method. Methods: We conducted a retrospective analysis of patients who underwent core extirpation for FD of the zygomaticomaxillary region from 2012 through 2021. Computed tomography (CT) scans were performed 6 to 12 months before the operation, immediately before and after the operation, and during follow-up visits. We performed all operations using the upper gingivobuccal approach, and we extirpated the core of the lesion while preserving the cortical structures of the zygoma and the maxilla to maintain symmetrical facial contour. Results: In 12 patients with lesions in the growth phase, anteroposterior/mediolateral (AP/ML) length discrepancies and the volume increased between preoperative and immediate postoperative CT scans. All patients' immediate postoperative AP/ML discrepancies were stable up to 12-17 months postoperatively. Postoperative volume showed continuous lesion growth; the median volume growth rate was 0.61 cc per month. Conclusion: In this article, we present our experiences managing FD using the minimally invasive core extirpation technique, which entails small expected blood loss and can be performed as day surgery. It provides similar cosmetic outcomes as traditional bone shaving but with longer-lasting results. Although there are some limitations with the study's retrospective nature and small sample size, our 4-year follow-up results show promising results of the core extirpation method in well-indicated patients.

• The korean journal of orthodontics
• /
• v.53 no.4
• /
• pp.276-285
• /
• 2023

Objective: The aim of this retrospective study was to compare changes in hard tissue and soft tissue after the four first premolars were extracted with anterior teeth retraction according to the presence or absence of lip incompetence. Methods: Patients who underwent the four first premolars were extracted with anterior teeth retraction were divided into competent (n = 20) and incompetent lip (n = 20) groups. Cephalometric measurements for hard tissue and soft tissue changes were performed pre-treatment and post-treatment. Results: In the competent group, the upper and lower lips retreated by 2.88 mm and 4.28 mm, respectively, and in the incompetent group by 4.13 mm and 5.57 mm, respectively; the differences between the two groups were significant (p < 0.05). A strong positive correlation between retraction of the upper lip and upper incisors was observed in both groups (p < 0.05), whereas a correlation between retraction of the lower lip and lower incisors was only found in the incompetent group. A simple linear regression analysis showed that the pattern of lip retraction following the retraction of the anterior teeth was more predictable in the incompetent group than in the competent group. Conclusions: These findings suggest that the initial evaluation of lip incompetence in patients with skeletal Class II is essential for the accurate prediction of the soft tissue changes following retraction of the anterior teeth in premolar extraction treatment. Therefore, sufficient explanation should be provided during patient consultations.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.501-511
• /
• 1991

This study was performed to verify the craniofacial skeletal characteristics in anterior openbite group, in contrast to normal occlusion group, and also to find out, vertical factors which shows, correlate to the amount of anterior openbite. 21 individuals, including 10 males and 11 females, without orthodontic treatment history and anterior - posterior skeletal malrelationships, were selected and analyzed basic morphology and vertical factors, using standard lateral cephalogram. The obtained results as follows: 1. Comparison of anterior open-bite group with normal occlusion group using Moyers analysis. a) In basis morphologic analysis, Ba-SE-Me was lesser and Ba-SE-Mn. P. and Mn.P/A-B were greater in both sexes of anterior openbite group than in normal occlusion group. b) In angle measurements of vertical analysis, PMV/Pal. P. was lesser in male anterior openbite group and PMV/Occ. P. and PMV/Mn. P. were greater in both sexes of anterior openbite group than in normal occlusion group. c) In height ratio of vertical analysis, ATFH/PTFH and ALFH/ATFH were greater in both sexes of anterior openbite group than in normal occlusion group. 2. The amount of anterior openbite was correlated with PMV/Occ. P. and PMV/Mn. P.

• Archives of Craniofacial Surgery
• /
• v.25 no.2
• /
• pp.51-61
• /
• 2024

Background: The influence of smoking on nonsyndromic clefts has been a topic of research for many years. However, few studies have investigated the effect of smoking on causing clefts in different gene pools. Methods: A meta-analysis was conducted of case-control studies related to smoking. Keywords such as "clefts," "cleft lip," "cleft palate," "orofacial cleft," and "smoking" were used to search the MEDLINE, Embase, and Cochrane databases. Results: In total, 51 articles were reviewed. The RevMan software was utilized for the analysis, and the Mantel-Haenszel method was employed to pool the odds ratios (ORs) and 95% confidence intervals. Although the overall OR, a measure of the association between exposure and outcome, was higher for smokers than for non-smokers, this association was significantly stronger in individuals from Asia and South America (1.73), and lowest in Europe (1.31). Among active and passive smokers in Asia, the OR was approximately 0.93, indicating an equivalent impact from both types of smoking. Conclusion: This analysis indirectly suggests that restriction measures targeting both active and passive smoking are crucial in Asia.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.310-322
• /
• 2016

Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.4
• /
• pp.333-342
• /
• 1997

The purpose of this study was to establish a set of standard values for the form of the nose and its relationship to other craniofacial structures in young korean adults in angle's class I occlusion. The subjects were 40 (20 male, 20 female) Korean dental students in angle's class I occlusion. Lateral cephalometric radiographs were used to determine the form of the nose and its positon relative to other craniofacial structures. The results were obtained as followed. 1. There was a significance between the registered male and female measurements in nasal height(P<0.05). (Male: 58.23mm Female : 54.62mm) 2. There was a significance between the registered male and female measurements in nasal length(P<0.05). (Male : 54.18mm Female : 49.38mm) 3. The vertical distances from the tip of the nose in Korean adults were significantly greater in the male(P<0.05) and were smaller in both sex in comparison with caucasian.

• Archives of Craniofacial Surgery
• /
• v.17 no.3
• /
• pp.169-172
• /
• 2016

Dermal fillers are generally accepted as safe and well-tolerable cosmetic tools. However, adverse reactions have been reported in the literature. Here, we present a case of atypical facial filler granuloma and compare its histologic features with those of the classic paraffinoma.