• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.714-718
• /
• 1996

The interference phenomenonof a dynamic crack propagation in a inclined DEN(double edge notched) specimen has been investigated by using the dynamic photoelasticity. One crack initiated by static loading is propagated dynamically and experiences a mixed mode condition(interference) as the crack approaches to the inclined edge notch. We use the overdeterministic least-square method to extract dynamic $K_{Id}$ K sub IId/and .sigma. $_{ox}$from the recorded dynamic photoelastic pattern surounding a running crack. The evaluated $K_{Id}$ $K_{IId}$and .sigma. $_{ox}$together with the crack propagation velocity estimate the dynamic crack interference phenomenonenonon

• Structural Engineering and Mechanics
• /
• 제36권4호
• /
• pp.481-497
• /
• 2010

The shaking table tests were conducted on two small-scale models (Model 1 and Model 2) to examine the earthquake-induced damage of a concrete gravity dam, which has been planned for the construction with the recommendation of the peak ground acceleration of the maximum credible earthquake of 0.42 g. This study deals with the numerical simulation of shaking table tests for two smallscale dam models. The plastic damage constitutive model is used to simulate the crack/damage behavior of the bentonite-concrete mixture material. The numerical results of the maximum failure acceleration and the crack/damage propagation are compared with experimental results. Numerical results of Model 1 showed similar crack/damage propagation pattern with experimental results, while for Model 2 the similar pattern was obtained by considering the modulus of elasticity of the first and second natural frequencies. The crack/damage initiated at the changing point in the downstream side and then propagated toward the upstream side. Crack/damage accumulation occurred in the neck area at acceleration amplitudes of around 0.55 g~0.60 g and 0.65 g~0.675 g for Model 1 and Model 2, respectively.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.65-70
• /
• 2003

In this study, researchers developed the estimative algorithm for artificial defect in semiconductor packages and performed it by pattern recognition technology. For this purpose, the estimative algorithm was included that researchers made software with MATLAB. The software consists of some procedures including ultrasonic image acquisition, equalization filtering, Self-Organizing Map and Backpropagation Neural Network. Self-organizing Map and Backpropagation Neural Network are belong to methods of Neural Networks. And the pattern recognition technology has applied to classify three kinds of detective patterns in semiconductor packages : Crack, Delamination and Normal. According to the results, we were confirmed that estimative algerian was provided the recognition rates of 75.7% (for Crack) and 83.4% (for Delamination) and 87.2 % (for Normal).

• 비파괴검사학회지
• /
• 제10권2호
• /
• pp.23-31
• /
• 1990

Acoustic Emission(AE) signals obtained during fracture toughness test and fatigue test for nuclear pressure vessel material(SA 508 cl.3) and artificial AE signals from pencil break and ultrasonic pulser were classified using pattern recognition methods. Three different classifiers ; namely Minimum Distance Classifier, Linear Discriminant Classifier and Maximum Likelihood Classifier were used for pattern recognition. In this study, the performance of each classifier was compared. The discrimination of AE signals from cracking and crack surface rubbing was possible and the analysis for crack propagation was applicable by pattern recognition methods.

• 대한전자공학회논문지SP
• /
• 제46권3호
• /
• pp.125-137
• /
• 2009

음향방출 기법은 작동중인 상태에서 기계 설비를 비파괴 검사할 수 있는 기법이며, 균열성장 같은 장애의 신뢰성 있는 감시를 위해서 순간적인 균열신호뿐만 아니라 동특성을 이용하는 것이 중요하다. 균열성장을 검출하기 위해 널리 사용되는 물리적 파괴 3단계는 음향방출 현상이 시간에 따라 서로 겹치는 문제점이 있어 정확한 균열성장 시간을 추정하기 어렵다. 제안한 패턴인식 기법은 오경보와 미탐지를 최소화하기 위해서 음향방출 동특성을 입력으로 사용하고, 균열성장 시간을 정확히 추정하기 위해 시간에 따른 클러스터링 기법을 사용한다. 실험결과는 제안한 패턴인식 기법이 압력의 변화에 의한 음향방출의 변화의 강인함 때문에 실용화에 효율적임을 보여준다.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.945-952
• /
• 1987

본 연구에서는 이런 점을 감안하여 테프론 주형법의 장점들을 이용하되 에폭 시 덩이를 만드는 주형상자 대신에 에폭시 판과 테프론 균열이 수직성과 직선성을 유 지할 수 있도록 새로 주형대(molding table)를 개발하여 필요한 균열길이와 두께의 에 폭시판을 만들고 기계가공없이 직접시편으로 사용하여 광탄성장치에서 무늬사진을 얻 음으로서 기계 가공시에 일어나는 여러 문제들을 일소하고 시간과 경비를 크게 절약 하려고 하였으며 지금까지의 어떤 실험방법 보다도 정밀한 측정으로 응력확대계수 해 석상의 오차를 줄이는데 목적이 있다.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.537-549
• /
• 2020

The presence of cracks changes the water content pattern during seepage through a cracked soil as compared to that of intact soil. In addition, several different crack networks may form in one soil type. These two factors result in a variation of water contents in the soil matrix part of a cracked soil during seepage. This paper presents an investigation of the effect of crack network representation on the water content of the soil matrix part of cracked soil using numerical models. A new method for the numerical generation of crack networks incorporating connections among crack endpoints was developed as part of the investigation. Numerical analysis results indicated that the difference in the point water content was large, whereas the difference in the average water content was relatively small, indicating the uniqueness of the crack network representation on the average water content of the soil matrix part of cracked soil.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.877-880
• /
• 2009

A curing process in post-printing section of R2R process is required for an electrical property of the printed pattern when devices such as RFID, Solar cell are printed. PEN as well as heat-stabilized PET which is used as a plastic substrate would be deformed at high temperature due to change of its elastic modulus. And crack in the printed pattern, which is on the plastic substrate is occurred due to the deformation of the substrate. The occurrence of crack causes electrical resistance to increase and the quality of the device to deteriorate. In case of RFID antenna, the range of reading distance is shortened as the electrical resistance of the antenna is increased. Therefore, the deformation of the plastic substrate, which causes the occurrence of crack, should be minimized by setting up low operating tension in R2R process. In low tension, slippage between a moving substrate and a roller would be generated when the operating speed is increased. And scratch would be occurred when slippage is generated due to an air entrainment, which is related to the thickness of the air film. The thickness of the air film is increased when operating speed is increased as shown by simulation based on mathematical model. The occurrence of scratch in conductive pattern printed by roll to roll process is a critical damage because it causes degradation or failure of electrical property of it.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.814-822
• /
• 2013

For the fault diagnosis of a mechanical system, pattern recognition methods have being used frequently in recent research. Hidden Markov model(HMM) and artificial neural network(ANN) are typical examples of pattern recognition methods employed for the fault diagnosis of a mechanical system. In this paper, a hybrid method that combines HMM and ANN for the fault diagnosis of a mechanical system is introduced. A rotating blade which is used for a wind turbine is employed for the fault diagnosis. Using the HMM/ANN hybrid model along with the numerical model of the rotating blade, the location and depth of a crack as well as its presence are identified. Also the effect of signal to noise ratio, crack location and crack size on the success rate of the identification is investigated.

• 동력기계공학회지
• /
• 제8권3호
• /
• pp.44-51
• /
• 2004

Effect of corrosion characteristics in relation to loaded stress in the welded zone of A5083-H116 aluminum alloy, in the seawater was studied. The corrosion experiment was performed for 120 hours on the specimens in the natural seawater tank with four steps of the loaded stress. The corrosion crack, corrosion rate, electrode potential, current, and corrosion pattern, etc. were examined for the specimens with the elapse of the immersion time. The main result derived from this study is the crack growth length is increased with the increasing loaded stress. The electrode potential and the corrosion current are decreased rapidly in the early stage of the corrosion, and then decreased gradually and stabilized eventually with the elapse of the immersion time. The test condition of the longer crack growth tends to show the higher corrosion rate. Corrosion pattern of the welded zone indicates that the depth and width of the pitting become increasing with the increasing loaded stress.