• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.135-145
• /
• 1988

본(本) 연구(硏究)는 재료(材料)의 배합(配合)이 단순한 mortar를 제작 그 균열발생을 관찰, 측정하여 정적하중(靜的荷重)에 의한 균열 및 일정진폭을 갖는 동적하중(動的荷重)에 의한 균열성장영역 예측을 시도한 것이다. 사용시편은 mortar의 배합비(配合比)와 물-시멘트비(比)를 달리하여 ASTM E 561-80에서 제안한 CLWL-DCB(crack-line-loaded-double-cantilever-beam)의 제1방법인 벽개형(劈開型)모드(opening mode)에 의거 균열성장거동을 측정하였다. 본(本) 실험(實驗)에서는 X-Y recorder에 나타난 하중(荷重)(P)-균열개구변위($2V_1$), 균열개구변위($2V_1$)-균열선단개구변위($2V_2$)의 diagram을 해석하여 정적하중(靜的荷重)에 의한 균열선단의 비선형적인 미소균열을 포함하는 유효균열길이(effective crack length; $a_e$)와 균열선단의 미소균열을 제외한 물리적균열길이(physical crack length; $a_m$) 및 replica 필름으로 구한 균열길이(replica crack length; $a_t$)의 상관관계와 일정진폭을 갖는 반복하중에 의한 $a_e$, $a_m$, $a_t$를 구하여 정적하중(靜的荷重)에 의한 균열특성과 동적하중(動的荷重)에 의한 균열특성을 조사한 것이다.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.96-102
• /
• 1990

본 연구에서는 압력용기 소재인 SPV 50Q와 고압강관 소재로 사용하는 SPV 50Q 와 고압강간 소재로 사용하는 API 5A-K55에서의 표면균열의 표면방향과 깊이방향 또한 두께 평균에 대한 균열열림을 스트레인 게이지와 CMOD(Crack Mouth Opening Displace- ment)게이지를 이용하여 측정 비교하였다. 또한 표면균열의 균열 열림하중을 측정위 치에 따라 평가하고, 본연구에 사용한 두 소재에 대해 균열 열림을 고려한 표면균열 진전평가가 각 방향에 대해 이루어졌다.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.740-745
• /
• 1987

본 연구에서는 파괴조건(4)와 유사하게 임계 스트레인 조건을 사용하나 기존 스트레인이 없는 재료의 날카로운 균열선단을 가진 시편의 파괴인성실험치(.delta.$_{IC}$)로 부터 재료의 고유상수인 특성길이를 결정하는 방법이 제안되었다.이 파괴조건을 이 용하여 처음노치선단의 유한한 반경과 재료의 기존 스트레인이 시편의 파괴개시에 미 치는 영향을 예측하고자 한다.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.100-109
• /
• 2020

Pipelines subjected to ground movement would be easily exposed to large-scale deformation. Since such deformations may cause the pipeline failure, it is important to ensure the safety of pipelines in various operation conditions. However, crack in weld metal have been considered as one of the main causes that can deteriorate the structural integrity of the pipeline. For this reason, the structural integrity of the pipe containing the crack in the weld should be obtained. In order to assess cracked pipe, J-integral and crack-tip opening displacement(CTOD) have been applied widely as the elastic-plastic fracture mechanics parameters representing crack driving force. In this study, engineering solutions to calculate the J-integral and CTOD of pipes with a circumferential outer surface crack in the weld are proposed. For this purpose, 3-dimensional elastic-plastic finite element(FE) analyses have been performed considering the effect of overmatch and width of weld. The shape of the weld was simplified to I-groove, and axial displacement was employed as for loading condition. Based on FE results, the effects of crack size, material properties and width of weldment on J-integral and CTOD were investigated. Additionally, the J-integral and CTOD for I-groove were compared with those for V-groove to examine the effects of the weld shape, and a proportionality coefficient of J-integral and CTOD was calculated from the results of this paper.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.151-154
• /
• 2000

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.291-298
• /
• 2003

Interfacial crack problems between fiber and matrix in composite materials are discussed. A series of interfacial crack initiation and propagation experiments are conducted using the biaxial loading device for various mode-mixes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. Initial velocity of crack propagation is very dependent upon the mode-mixes. It increased with positive mode-mix due to the increase of stress singularities ahead of crack front and decreased with negative mode-mix resulting from the increase of the degree of compressive stress behind the crack front. Crack propagation was less accelerated with positive mode-mix than the negative mode-mix.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.24-32
• /
• 2021

The size of container ships is increasing to increase the cargo loading capacity. However, container ships are limited in terms of the hull longitudinal strength. To overcome this limitation, brittle crack arrest steel can be used. This study was aimed at examining the influence of the heat input on the welding procedures of flux cored arc welding and submerged arc welding. In the experiment, the crack tip opening displacement test, which pertains to a parameter of fracture mechanics, was performed, and a 3-point bending tester was adopted. Based on the results, the crack measurement method was presented, and the stress expansion coefficient value for the pre-fatigue crack length was derived according to the heat input after the pre-cracking length was measured. It was noted that the heat input affected the crack tip opening displacement of brittle crack arrest steel.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.553-560
• /
• 2015

Fracture mechanics analysis for cracked pipes is essential for applying the leak-before-break (LBB) concept to nuclear piping design. For LBB assessment, crack instability and leak rate should be predicted accurately for through-wall cracked pipes. In a nuclear piping system, elbows are connected with straight pipes by circumferential welding; this weld region is often considered a critical location. Hence, accurate crack assessment is necessary for cracks in the interface between elbows and straight pipes. In this study, the stress intensity factor (SIF) and elastic crack opening displacement (COD) were estimated through detailed 3D elastic finite element (FE) analyses. Based on the results, closed-form solutions of shape factors for calculating the SIFs and elastic CODs were proposed for circumferential through-wall cracks in the abovementioned interfaces under internal pressure. In addition, the effect of the elbow on shape factors was investigated by comparing the results with the existing solutions for a straight pipe.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.39-45
• /
• 2002

Initiation and propagation of interfacial crack along bimaterial interface are considered in this study. A biaxial loading device for a single specimen is used for obtaining a wide range of mode-mixities. The specimen is an edge-cracked bimaterial strip of glass and epoxy; the biaxial loading device, being capable of controlling displacements in two perpendicular directions, is developed. A series of interfacial crack initiation and Propagation experiments are conducted using the biaxial loading device for various mixed modes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. The behavior of interfacial crack propagation analyzed as a function of mode-mix shows that initial crack propagation is delayed with increase of mode-mixity, and its velocity is increased with positive mode-mixity but decreased with negative case. However, it is found that crack propagation is less accelerated with positive mode-mixity than the negative mode-mixity, which may be caused by contact and/or effects of friction between far field and near-tip Held along the interfacial crack.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.61-66
• /
• 2008

It is important to calculate the exact crack opening area in the cracked pipe subjected to axial force and bending moment. Among many solutions for obtaining the crack opening displacement, Paris-Tada's expression, which is derived from energy method, is open used in fracture analysis for piping crack problems because of its simplicity. But Paris-Tada's equation has conservativeness when radius over thickness ratio(R/t) is ten or less, for it is based on the stress intensity factor solution having a compliance function derived from a simple shell theory. In this paper we derived a new expression using a different stress intensity factor solution which is able to consider the variation of compliance through wall thickness in a cracked pipe. Conservativeness of both equations was examined and compared to finite element analysis results. Conservativeness of the new equation is decreased when R/t > 10 and increased slightly when R/t < 10 compared with Paris-Tada's. But Both equations were highly conservative when R/t < 10 compared with finite element analysis results.