• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.29-36
• /
• 1991

장섬유 강화 마그네슘 복합제(FP/ZE41A)의 피로 균열 성장 거동에 대한 열처리 효과를 규명한 것으로 TEM관측에 의해 알루미나 섬유와 마그네슘 복합 매트릭스간의 상호 접변을 완화시키기 위하여 풀림을 실시하였다. 피로 균열 성장 방향에 수직한 섬유와 평행한 섬유들에 대한 피로 균열 성장 거동에 관한 실험을 실시 한 바, 피로 균열 성장 방향에 수직한 시험편의 경우 열처리를 실시한 시험편은 잔류 응력을 제거시키지 않은 시험편에 비해 피로 균열 성장에 대한 더 많은 저항성을 갖고 있음을 알수 있었다. 그러나, 이에 반해 피로 균열 성장 방향에 평행한 시험편의 경우는 잔류 응력을 제거시키지 않은 시험편 이 열처리를 실시한 시험편에 비해 더 많은 피로 균열 성장 저항성을 내포하고 있다는 피로 균열 성장 거동에 대한 차이점을 발견할 수 있었다. 피로 파괴 표면에 대한 연성 파열과 섬유 박리를 SEM관찰한 결과 열처리는 피로균열 성장 거동에서 지적된 바와 같이 섬유와 매트릭스 상호면의 강도를 약화시킨다는 것을 알 수 있었다.

• 전산구조공학
• /
• 제9권4호
• /
• pp.189-198
• /
• 1996

콘크리트 중력댐 상부면의 균열에 작용하는 수압의 영향을 주로 고려하여 댐의 파괴거동을 조사하였다. 첫째, 표면적분법에 의하여 응력확대계수를 구하는 경우에 작용하는 수압의 형태를 등분포형태 외에, 삼각형 분포 및 포물선분포도 고려하여 보았다. 둘째, FRANC(FRacture Analysis Code)를 이용하여 균열면에 작용하는 수압의 형태에 따른 기존균열의 전파방향을 추적하였다. 셋째, 월류수위 아래에서 균열이 전파되지 않을 수 있는 한계균열길이를 수압의 분포형태에 따라 구분하여 구하여 보았다. 표면적분법으로 수압의 형태에 따라 응력확대계수를 구한 결과는 FRANC를 이용하여 얻어진 결과와 비교 되었으며 비교적 잘 일치함을 알 수 있었다. 균열면에 작용하는 수압의 형태가 삼각형분포의 경우에 균열의 전파방향은 등분포의 경우에 비하여 댐의 기초쪽으로 기우는 것을 알 수 있었으며, 또한 월류수위 아래에서 한계균열길이는 댐높이의 대략 2/5-1/2되는 곳에서 최대가 됨을 알 수 있었다.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.48-55
• /
• 2000

For the Tailor Welded Blank sheet used for automobile body panel, the characteristics of fatigue strength and crack propagation behavior were studied. The thickness of specimens was joined to be same (0.9mm+0.9mm) and different (0.9mm+2.0mm) .As a base test, mechanical properties around weld zone were examined . The results indicated that there were no significant decreases in mechanical properties , but hardness around weld bead was 2.3 times greater than base material . The fatigue strength was the highest when the loading direction was parallel to the welding direction, which was about 85% of tensile strength of base material. It was decreased by 8.5% when the thickness of specimens and base metal was different, and it was increased by 25% when pres-strain was applied. The crack propagation rate was noticeably decreased around weld line and rapidly increased as it passed through weld line. Reviewing the shape of the crack propagation , crack width around weld line was around the weld zone due to retardation of crack growth , but is became narrow passing weld line due to decreased toughness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.339-344
• /
• 1999

For the Tailor Welded Blank sheet used for automobile body panel, the characteristics of fatigue strength and crack propagation behavior were studied. The thickness of specimen was machined to be same (0.9mm+0.9mm) and different (0.9mm+2.0mm). As a base test, mechanical properties around welding zone were examined. The results indicated that there were no significant decreases in mechanical properties, but hardness around welding bead is 2.3 times greater than base material. The fatigue strength was the highest when the loading direction was parallel to the welding direction, which was about 85% of tensile strength of base material. It was decreased by 8.5% when the thickness of specimen and base material was different, and it is increased by 25% when pre-strain was applied. The crack propagation rate was noticeable decreased around welding line and rapidly increased as it passed by welding line. Reviewing the shape of the crack propagation, crack width around welding line was wide around the welding zone due to retardation of crack growth, but it became narrow passing welding line due to decreased toughness.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1681-1690
• /
• 1992

본 연구에서는 유리섬유강화 플라스틱복합재료를 준비하여 이 재료의 섬유방 향에 따른 파괴인성 및 피로 균열성장거동을 평가하였다.

• 한국해양공학회지
• /
• 제18권6호
• /
• pp.84-90
• /
• 2004

Fatigue tests were conducted on SM45C steel using hour-glass shaped smooth tubular specimen under biaxial loading in order to investigate the crack formation and growth at room temperature. Three types of loading systems, were employed fully-reserved cyclic torsion without a superimposed static tension or compression fully-reserved cyclic torsion with a superimposed static tension and fully-reserved cyclic torsion with a superimposed static compression. The test results showed that a superimposed static tensile mean stress reduced fatigue life however a superimposed static compressive mean stress increased fatigue life. Experimental results indicated that cracks were initiated on planes of maximum shear strain whether or not the mean stresses were superimposed. A biaxial mean stress had an effect on the direction that the cracks nucleated and propagated at stage 1 (mode II).

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.85-91
• /
• 1987

The aim of this study was to clarify whether bonding/debonding procedure will affect the occurance of enamel crack. The frequency of enamel crack was compared between before-bonding and after-debonding on 200 human extracted teeth. Each facial surface of the tooth was divided in 9 fragments. A presence of crack, which was classified by its direction as vertical, horizontal and oblique crack, was surveyed in each fragment. Number of all cracks in facial surface was 1355 at before-bonding, and 1605 at after-debonding, so it revealed significant increase rate of $18.5\%$, but compared by fragment, cracks were significantly Increased in OC, OD, CC and GC fragments. All kinds of cracks were significantly increased, especially increase rate of oblique crack reached $54.9\%$. The increase rate of cracks was not superior at any fragment or region, but some evidence was seen in CC fragment. Judging from the above, increase of crack is unavoidable with bonding/debonding procedures.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.577-584
• /
• 2003

A crack with growth in ferroelectric ceramics under purely electric loading is analyzed. The crack tip stress intensity factor for the growing crack under small-scale conditions is evaluated by employing the model of nonlinear domain switching. The crack tip stress intensity factor increases or decreases with crack growth, depending on the electrical nonlinear behavior and the direction of an applied electric field. It is shown that the ferroelectric material can be either toughened or weakened as the crack grows. The steady state crack growth in ferroelectric ceramics is also discussed.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.773-782
• /
• 2002

본 연구에서는 향후 사용빈도가 증가할 것으로 예상되는 SM570, POSTEN60 및 POSTEN80 강재를 대상으로 용접선 방향이 피로균열성장속도에 미치는 영향, 용접방법 및 강도등급에 따른 피로균열성장특성, 그리고 각 재질별(모재부, 열영향부, 용접금속부) 피로균열 성장특성을 정량적으로 평가하기 위해서 CT시험편을 제작해서 일련의 피로시험을 실시하였다. 피로시험결과 노치가 용접선과 평행한 시험체의 경우 노치선단에 존재하는 압축잔류응력의 영향으로 노치가 용접선과 직각인 시험체의 경우보다 피로균열성장속도의 지연현상이 현저해지는 것을 알 수 있었다. 그리고 용접 방법에 따른 피로균열성장특성은 강재의 강도등급에 관계없이 FCAW가 SAW에 비해서 피로균열성장속도의 분산이 적게 나타나고 있으며, 또한 높은 응력확대계수범위 영역에서 피로균열성장속도의 수렴현상이 나타나는 것을 알 수 있었다. 한편 본 피로시험결과와 기존의 연구결과를 비교하면 피로균열성장영역에서의 피로균열성장속도는 유사한 경향을 나타내고 있으므로 본 연구에서 대상으로 한 강재는 피로안전성을 충분히 확보하고 있음을 알 수 있었다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.152-158
• /
• 2005

The stress conditions acting on the practical structure are complex, and thus most cracks existing in the practical structures are under mixed-mode loading conditions. The effect of shear load component of mixed-mode loading acts more greatly in the stage of crack initiation and initial propagation than crack propagation stage. Hence, research on the behavior in the stage of crack initiation and initial propagation need to be examined in order to evaluate behavior of mixed-mode fatigue cracks. In this study, the crack tip displacement(CTD) was measured by using the direct measuring method(DMM). We examined the behavior at crack tip by determining crack opening load$(P_{op})$. From the test results, the propagation behavior of mixed-mode fatigue cracks was evaluated by considering mixed-mode crack closure. Also, we examined the characteristic of crack propagation under mixed-mode loading with crack propagation direction.