• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.195-202
• /
• 2016

In this paper, crack detection method using eigen value analysis is presented. Three methods are used: theoretical analysis, finite element method with the cracked beam elements and finite element method with three dimensional continuum elements. Finite element formulation of the cracked beam element is introduced. Additional term about stress intensity factor based on fracture mechanics theory is added to flexibility matrix of original beam to model the crack. As using calculated stiffness matrix of cracked beam element and mass matrix, natural frequencies are calculated by eigen value analysis. In the case of using continuum elements, the natural frequencies could be calculated by using EDISON CASAD solver. Several cases of crack are simulated to obtain natural frequencies corresponding the crack. The surface of natural frequency is plotted as changing with crack location and depth. Inverse analysis method is used to find crack location and depth from the natural frequencies of experimental data, which are referred by another papers. Predicted results are similar with the true crack location and depth.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.571-576
• /
• 2023

In this study, the harmless crack size(a_hml) according to the residual stress depth was evaluated using the fatigue limit of SCM440 steel by quenching-tempering(QT) and induction hardening(IH), and threshold stress intensity factor of QT steel. Because the residual stress increased rapidly as the crack depth increased, a_hml was determined at the depth of all the crack aspect ratio(As) regardless of Type I-III, and a_hml also increased according to the residual stress depth. a_hml was minimal at As=1.0 and maximal at As=0.1, but was almost similar on each Type. a_hml was small the dependence on As.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.247-253
• /
• 2007

현장에서 콘크리트 구조물의 균열 깊이를 추정하기 위한 자기 보정 표면파 투과 측정과 측정된 투과 함수의 차단주파수를 이용하는 기존의 방법은 측정 조건에 따른 투과 함수의 변동성이 매우 커서 실제로 적용하기가 어려운 단점이 있다. 본 연구에서는 차단주파수와 같이 특정 주파수를 선정하여 균열 깊이를 추정하는 방법 대신에 측정된 자기 보정 표면파 투과 함수 자체를 균열 깊이 추정에 이용하는 방법을 제안하고자 한다. 이를 위하여 다양한 균열 깊이에서 측정된 자기 보정 표면파 투과 함수를 주성분 분석법을 이용하여 차원을 축소한 후, 축소된 투과 함수를 인공신경망의 입력으로 사용하여 이로부터 균열 깊이를 추정하는 방법을 제시하였다. 한편, 제안된 방법의 유효성을 판단하기 위하여 서로 다른 균열 깊이를 가진 5개의 실험체에 대하여 실험적인 연구를 수행하였으며, 실험 결과 제안된 방법이 콘크리트 구조물이 균열 질이 평가에 매우 유효한 방법임을 알 수 있었다.

• 한국공간구조학회논문집
• /
• 제23권3호
• /
• pp.95-103
• /
• 2023

With the increasing number of aging buildings across Korea, emerging maintenance technologies have surged. One such technology is the non-contact detection of concrete cracks via thermal images. This study aims to develop a technique that can accurately predict the depth of a crack by analyzing the temperature difference between the crack part and the normal part in the thermal image of the concrete. The research obtained temperature data through thermal imaging experiments and constructed a big data set including outdoor variables such as air temperature, illumination, and humidity that can influence temperature differences. Based on the collected data, the team designed an algorithm for learning and predicting the crack depth using machine learning. Initially, standardized crack specimens were used in experiments, and the big data was updated by specimens similar to actual cracks. Finally, a crack depth prediction technology was implemented using five regression analysis algorithms for approximately 24,000 data points. To confirm the practicality of the development technique, crack simulators with various shapes were added to the study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.469-474
• /
• 1999

The object of study is analysis to joint crack behavior of cracked joint concrete pavement. In the new constructing concrete pavement, joint crack behavior was compared general joint depth D/4 with joint depth D/3 and D/5 that it's environmental effects changed temperature and humidity. After joint saw cutting joint section was predicted crack at joint depth D/5 test section from the result for monitoring development of crack. In the setting of data logger system of the joint section, it's data compared see with the naked eye. In the research, development of crack at the joint section should effect to joint saw timing latter than joint depth. This performance could be the minimum of deterioration to the early curing. In this research, At new constructing of joint concrete pavement of highway, the monitoring system be setting after finished paving and joint sawing. The system and see with the naked eye could be analysis to pavement behaviors from collecting data at the test section. This system could be monitoring shot term and long term. In this report, joint section of crack behavior analysis used to collected data during a month after paving and joint sawing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.35-38
• /
• 1990

Depths of the vertical cracks in the concrete were determined by the time of flight of the ultrasonic waves. The ultrasonic waves are diffracted at the crack tip, and the arrival time of ultrasonic waves are dependent on the crack depth and speration distance between transmitting and receiving ultrasonic transducers. The vertical cracks with 0.2-2mm width and 10-100mm depth were examined by multi-layered ultrasonic transducers. It was found that the time of flight of ultrasonic waves were proportional to the depth of vertical cracks. The depth of vertical cracks in the range of 20-100mm depth could be determined by the transient time of the diffracted ultrasonic waves

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.233-238
• /
• 2022

This study evaluated the fatigue limit depending on microcracks using 0.57 wt.% carbon steel with different Vickers hardness. The fatigue limit was almost constant up to a certain limit regardless of the carbon content. However, the fatigue limit decreased rapidly as the size of the crack increased. As the crack aspect ratio was smaller, the fatigue limit of the depth (point A) a lot decreased. The fatigue limit ratio of the depth decreased significantly because the crack propagation in the depth direction was fast as the crack aspect ratio became smaller. On the other hand, the fatigue limit ratio of surface cracks increased as the crack aspect ratio decreased.

• 비파괴검사학회지
• /
• 제29권2호
• /
• pp.98-103
• /
• 2009

원자력발전소 증기발생기 전열관에 균열이 발생할 경우 해당 전열관을 관막음하여 안전하게 운영하고 있다. 만약 가동중검사시 균열 검출에 실패할 경우 전열관 파단사고와 같은 대형 사고로 이어질 수 있다. 증기발생기 전열관에는 여러 유형의 균열이 발생하고 있는데, 와전류검사로부터 균열이 확인된 경우 균열의 크기를 평가하여 전열관의 건전성을 평가하여야 한다. 그러나 균열의 깊이평가는 평가방법이 난해하여 평가 결과의 정확도 및 평가자 사이의 일관성이 떨어진다. 본 논문에서는 현재 사용되고 있는 균열깊이 평가방법에 대한 정확도 및 일관성을 확인하고, 보다 신뢰성 있는 평가방법의 개발을 위하여 고리 1호기 구증기발생기를 활용하였다. 국내 유자격 평가자들의 round robin test 결과를 통계적으로 분석하여 균열 유형별 최적의 평가방법을 도출하였다. 본 논문에서 제시된 균열깊이 평가기법은 국내 원전의 증기발생기관리프로그램에 활용되어 원전의 신뢰성 향상에 기여할 것으로 기대된다.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.791-797
• /
• 2022

Using the fatigue limit (△σ_unsm) and residual stress (σ_r) of the UNSM smooth specimen, the harmless maximum crack depth (α_hml) according to the crack aspect ratio (As) was evaluated. α_hml evaluated the reliability in the relationship between the minimum crack depth (α_NDI1, α_NDI2) detectable by nondestructive inspection(NDI) and the crack depth (α₂₅, α₅₀) that reduces the fatigue limit by 25% and 50%. All α_hml was determined by the crack depth. The α_hml of 80N UNSM with high σ_r and high △σ_unsm was found to be large. σ_r in the depth direction had a much effect on α_hml. Since α_hml>α₅₀(As=0.6-0.1) and α_hml>α₂₅, α₂₅ and α₅₀(some range) can secure the safety and reliability. Since α_hml<α₅₀ (As=1. 0-0. 6), it cannot be made harmless by UNSM. So safety and reliability cannot be secured. α_NDI1 and α_NDI2 are larger than α₂₅, α₂₅ cannot be detected by NDI. α_NDI1 and α_NDI2 are smaller than α₅₀, α₂₅ can detected by NDI.

• 비파괴검사학회지
• /
• 제29권5호
• /
• pp.405-414
• /
• 2009

이 논문에서는 표면으로부터 내부로 진전된 CT피로시험편의 노치 피로균열을 대상으로 회절초음파를 이용하여 균열깊이를 평가하기 위한 방법을 제안하고 그 타당성을 실험에 의해 검증하였다. 특히 균열선단 이외에 노치와 같은 또 다른 회절파 발생요소가 존재하는 상황에서 회절파 성분들을 정확하게 규명하기 위해 탐촉자 스캔에 의한 영상화 및 전파경로 분석을 실시하였다. 실험은 균열이 없는 시험편과 균열이 있는 시험편에 적용하였다. 실험 및 분석의 결과 주파수가 클수록 그리고 탐촉자의 굴절각이 클수록 정확한 측정이 가능했고, 4MHz의 $60^{\circ}-60^{\circ}$ 탐촉자 조합의 경우 오차 0.38 mm 이내로 균열깊이가 측정되었다. 제안 기법은 균열 선단부가 미세하여 회절파 세기가 미약하더라도 적용이 가능하다는 특징을 가지므로 미세 균열의 검사 및 깊이 평가에 활용할 수 있을 것으로 기대된다.