• 제목/요약/키워드: CrN/Cu

검색결과 211건 처리시간 0.025초

금속선을 삽입한 N-5복기 추진제의 연소 특성 (A Study on the Burning Characteristics of N-5 Propellant Embedded with Metal Wires)

  • 유지창;박영규;김인철
    • 한국추진공학회지
    • /
    • 제3권1호
    • /
    • pp.78-85
    • /
    • 1999
  • 복기 추진제인 N-5 추진제에 4종의 금속선(Ag, Cu, Al, Ni-Cr선)을 삽입하여 연소 특성을 고찰하여 보았다. 금속선이 삽입된 복기 추진제의 연소속도 증가비($r_w$/$r_sb$)는 Ag선 > Cu선 > Al선 > Ni-Cr선의 순으로서 금속선의 열확산 계수의 크기 순과 일치하였다. 금속선을 삽입한 N-5추진제의 $r_w$/$r_sb$는 단열 불꽃 온도와 구조의 차이에 의하여 혼합형 추진제보다 작게 나타났다. 복기 추진제에 열확산 계수가 비교적 큰 Ag, Cu, Al선을 삽입한 경우, 금속선이 삽입되지 않은 추진제에서 나타난 plateau와 mesa 연소 특성이 사라진 반면 열확산 계수가 작은 Ni-Cr선을 삽입한 경우에서는 plateau와 mesa 연소 특성이 그대로 존재했다.

  • PDF

TiAl-N 코팅의 내식성에 미치는 4원계 원소 영향에 관한 연구

  • 정덕형;이선영;신승용;문경일
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.396-396
    • /
    • 2012
  • 산업 분야에서 TiN, CrN, CrAl-N, TiAl-N과 같은 Hard 코팅들은 기계적 특성이 우수하여 절삭 공구, 기계 부품분야에서 많이 사용되고 있다. 최근 연구 동향을 살펴보면 기존에 하나 또는 두가지 합금상태의 Hard 코팅을 넘어서 제3원소, 제4원소를 첨가하여 미세 구조적 변화를 통해 기존의 우수한 특성에 고온안정성, 내식성, 내산화성 등 다양한 기능성을 부여하는 다기능성 연구가 활발히 진행 중이다. 본 연구에서는 마그네트론 스퍼터를 이용하여 고경도 코팅인 Ti-Al계열에 Si, Cu, Cr, B을 첨가함에 따른 내식특성을 확인해보았다. 성분이 균일한 코팅을 만들기 위해 Ti-Al, Ti-Al-Si, Ti-Al-Cu, Ti-Al-Cr, Ti-Al-B 단일합금타겟을 제조하여 실험을 진행하였다. 기본 물성을 확인하기 위해 경도 측정과 SEM XRD 등을 분석하였다. 내식성 평가는 동전위 테스트와 염수분무 테스트를 진행하였고 전해질은 염수와 동일한 5%-NaCl로 진행하였다. 그 결과 Ti-Al-Cr이 내식성에 강한 것으로 나타났고 염수분무 실험에서도 1200시간 이상 지속되는 성과를 보였다.

  • PDF

Sliding Wear and Corrosion Resistance of Copper-based Overhead Catenary for Traction Systems

  • Kwok, C.T.;Wong, P.K.;Man, H.C.;Cheng, F.T.
    • International Journal of Railway
    • /
    • 제3권1호
    • /
    • pp.19-27
    • /
    • 2010
  • In the present study, the electrical sliding wear and corrosion resistance of pure copper (Cu) and six age-hardened copper alloys (CuCr, CuZr, CuCrZr, CuNiSiCr, CuBe and CuBeNi) were investigated by a pin-on-disc tribometer and electrochemical measurement. Various copper-based alloys in the form of cylindrical pin were forced to slide against a counterface stainless steel disc in air under unlubricated condition at a sliding velocity of 31 km/h under normal load up to 20 N with and without electric current. The worn surface of and wear debris from the specimens were studied by scanning electron microscopy. Both mechanical wear and electrical arc erosion were the wear mechanisms for the alloys worn at 50 A. Owing to its good electrical conductivity, high wear and corrosion resistance, CuCrZr is a promising candidate as the overhead catenary material for electric traction systems.

  • PDF

$Buffer/[CoFe/Cu]_N$ 다층박막의 자기저항 특성 (Magnetoresistance in $Buffer/[CoFe/Cu]_N$Multilayer)

  • 송은영;오미영;이현주;김경민;김미양;이장로;김희중
    • 한국자기학회지
    • /
    • 제8권4호
    • /
    • pp.216-223
    • /
    • 1998
  • DC magnetron sputtering 방법에 의해 Corning glass 가판 위에 제작한 buffer/[CoFe/Cu]N 형태의 다층작막에 대하여 자기저항비의 비자성층 Cu두께, 기저층 종류(Fe, Cu, Cr, Ta)와 두께, Ardkqfur, 다층 층수 및 열처리 의존성을 조사하였다. 자기저항비는 비자성층 Cu 두께에 따라 진동하였다. 기저층 Fe 및 Cr의 두께가 60$\AA$이고, 층수 N=15, Ardkqfur 5mTorr에서 극대자기저항비 14%를 보였으며 25$0^{\circ}C$까지의 시료에 대한 열처리는 다층박막의 주기성을 유지한 채 더 큰 결정립을 갖게 하여 자기저항비는 증가하였으나 그 이상의 온도에서는 계면 혼합 및 계면 확산에 의한 감소를 나타내었다. Cr기저층 시료가 Fe 기저층 시료보다 열적안정성이 더 좋은 것을 알 수 있었다.

  • PDF

우리나라 토양중 토지용도 및 시험방법별 중금속 분포 특성

  • 김태승;김동호;윤정기;박종겸;정일록;김종하;김혁
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
    • /
    • pp.242-246
    • /
    • 2006
  • Background level of heavy metals In soils (316 points by 15 classifications of land use) was investigated by two test methods, 0.1N HCl(1N HCl for As) extraction and aqua regia extraction methods. The average concentrations of aqua regia extractable heavy metals in soil(n=316) was 6.24(As), 0.25(Cd), 37.99(Cr), 24.10(Cu), 0.04(Hg), 25.68(Pb), 22.59(Ni), 106.11(Zn) mg/kg, respectively. Also the average concentrations of 0.1N HCl extractable heavy metals was 0.06(As), 0.08(Cd), 0.27(Cr), 3.78(Cu), 4.02(Pb), 12.5(Zn), 0.58(Ni) mg/kg, respectively. The ratio of soluble contents and total contents were 2.6%(As), 32.7%(Cd), 0.7%(Cr), 15.7%(Cu), 15.7%(Pb), 2.6%(Ni), 11.8%(Zn), and the correlation coefficient of soluble contents and total contents were 0.26(As), 0.27(Cd), 0.22(Cr), 0.57(Cu), 0.42(Pb), 0.23(Ni), 0.72(Zn).

  • PDF

경산지역 토양 및 수질오염에 관한 연구 (A Study of Soil and Water Pollutions in Kyungsan Province)

  • 김용태;이부용;김동석;양소영;이동훈;박병윤
    • 한국환경과학회지
    • /
    • 제11권7호
    • /
    • pp.713-720
    • /
    • 2002
  • In order to provide the basic information on the environmental pollution of Kyungsan province, the contents of Pb, Cd, Cr, Cu, Mn and Zn in soil, stream water, aquatic sediment and groundwater were investigated, and also the values of pH, COD, $KMnO_4-C$,\;NH_3-N,\;NO_2-N,\;NO_3-N$ and $Cl^-$ of stream water and groundwater were determined. The results were as follows. The values of COD, $NH_3-N,\;NO_2-N$ and $NO_3-N$ of the stream waters were very low. The contents of Pb, Cd, Cr, Cu and Zn in the stream waters were respectively at range of $0.014~0.063 mg/{\ell},\;0.004~0.007 mg/{\ell$\mid$, 0~0.045 mg/{\ell},\;0~0.008 mg/{\ell}$\;and\;$0.001~0.175 mg/{\ell}$, and these values were much lower than those of contaminated stream water in Korea. The contents of Cd, Cr, Cu and Zn in the soils were respectively at range of 0.12~O.71 ppm, 0.88~2.65 ppm, 2.86~22.33 ppm and 3.89~26.39 ppm, and these values were much lower than those of ordinary polluted areas in Korea. The contents of Cd, Cr, Cu, As, Zn and Mn in the aquatic sediments were respectively at range of 3.05~3.81 ppm, 14.6~70.6 ppm, 13.74~61.59 ppm, 76.8~465.5 ppm, 12.56~190.83 ppm and 333.3~l188.3 ppm. The values of pH, $KMnO_4-C,\;NH_3-N$, and $NO_3-N$ of the groundwaters were respectively at range of 7.6~8.4, $0~3.95{\ell}$, 0.05~0.15 mg/{\ell}$ and 0.05~0.42 $mg/{\ell}$. The contents of Pb, Cd and Cr in the groundwaters were respectively at range of 0.015~0.061 $mg/{\ell}$, 0.O06~0.009 $mg/{\ell}$ and 0.005~0.045 $mg/{\ell}$.

우리나라 토양의 중금속 자연배경농도 평가 (Evaluation on Natural Background of the Soil Heavy Metals in Korea)

  • 윤정기;김동호;김태승;박종겸;정일록;김종하;김혁
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제14권3호
    • /
    • pp.32-39
    • /
    • 2009
  • 우리나라 토양 중 중금속 자연배경농도를 비교 평가함으로써 토양오염기준 설정을 위한 과학적 근거를 마련하고자 전국 주요 지질단위인 대동층군, 백악기화강암, 옥천층군, 조선누층군, 평안층군, 경상누층군, 쥬라기화강암, 화산암, 변성암등 산림지역 총 92개 지점에 대한 표토를 0.1N 염산 가용성 시험방법 및 왕수 시험방법으로 분석한 결과, 왕수시험방법에 의한 자연함유량 평균값(mg/kg)은 Cd 0.287, Cu 15.26, Pb 18.43, Cr 25.36, Zn 54.27, Ni 17.68, As 6.83으로 조사되었으며, 가용성 시험결과 평균농도(mg/kg)는 Cd 0.040, Cu 0.48, Pb 3.06, Cr 0.09, Zn 1.54, Ni 0.27, As 0.089로 나타났다. 이들 시료의 가용성 평균 농도는 왕수 시험방법의 평균농도에 비하여 각각 Cd 13.9%, Cu 3.1%, Pb 16.6%, Cr 0.4%, Zn 2.8%, Ni 1.5%, As 1.3% 수준으로 낮게 평가되었다. 또한 가용성 시험방법과 왕수 시험방법에 의한 중금속 측정값 간의 상관계수는 0.24~0.88의 범위로 나타났으며 Cd > Pb > Cu > Ni > Cr > Zn $\approx$ As의 순으로 감소하였다.

전기저항 측정에 의한 Cu-0.2%Cr-0.05%Zr 합금의 시효석출 거동 (Precipitation Process in Cu-0.2%Cr-0.05%Zr Alloy Studied by the Electrical Resistivity Measurements)

  • 구본흔;이찬규;김창주;배동식
    • 열처리공학회지
    • /
    • 제18권5호
    • /
    • pp.312-317
    • /
    • 2005
  • The precipitation process in Cu-0.2 wt.%Cr-0.05 wt.%Zr alloys has been studied by electrical electrical resistivity measurements. The kinetics of precipitation could be well described by Johnson-Mehl-Avrami equation, $f(t)=1-\exp(-kt^n)$. The values of n were found to be in the range of 0.36~0.42 at first stage and 1.3~1.6 at second stage. The activation energy was determined by cross-cut method and was 80~89 kJ/mol. The value is similar to the energy for the migration of either a vacancy or a vacancy-solute complex through the lattice.

전자현미경을 이용한 전자재료분석 (Analysis of Electronic Materials Using Transmission Electron Microscopy (TEM))

  • 김기범
    • Applied Microscopy
    • /
    • 제24권4호
    • /
    • pp.132-144
    • /
    • 1994
  • The application of TEM in investigating the evolution of microstructure during solid phase crystallization of the amorphous Si, $Si_{1-x}Ge_x,\;and\;Si_{1-x}Ge_x/Si$ films deposited on $SiO_2$ substrate, in identifying the failure mechanism of the TiN barrier layer in the Cu-metallization scheme, and in comparing the microstructure of the as-deposited Cu-Cr and Cu-Ti alloy films are discussed. First, it is identified that the evolution of microstructure in Si and $Si_{1-x}Ge_x$ alloy films strongly depends on the concentration of Ge in the film. Second, the failure mechanism of the TiN diffusion barrier in the Cu-metallization is the migration of the Cu into the Si substrate, which results in the formation of a dislocation along the Si {111} plane and precipitates (presumably $Cu_{3}Si$) around the dislocation. Finally, the microstructure of the as-deposited Cu-Cr and Cu-Ti alloy films is also quite different in these two cases. From these several cases, we demonstrate that the information which we obtained using TEM is critical in understanding the behavior of materials.

  • PDF