• 제목/요약/키워드: Cr prediction

검색결과 142건 처리시간 0.033초

고속탭핑에 있어서 절삭토크에 관한 연구 (A Study on Tapping Torque in High Speed Tapping)

  • 최만성
    • 대한기계학회논문집
    • /
    • 제18권12호
    • /
    • pp.3195-3201
    • /
    • 1994
  • In order to analytically predict tapping torque and thrust force in high speed tapping, a cutting model for main cutting edge with a uniformly restricted tool-chip contact area were developed. From this model equations are derived for the prediction of tapping torque given the cutting conditions, tap geometry, and an empirical factor which is related to the workmaterial. Computed values of torque is shown to compare favorably with those obtained from tapping tests on 16MnCr5. The applied torque about the cutting edge of teeth at lead chamfer is estimated respectively and it is shown that observed value is gradually decreased with following teeth.

Prediction of Packing Density of Milled Powder Based on Packing Simulation and Particle Shape Analysis

  • Amano, Yuto;Itoh, Takashi;Terao, Hoshiaki;Kanetake, Naoyuki
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1254-1255
    • /
    • 2006
  • For precise property control of sintered products, it is important to understand accurately the packing density of the powder. We developed a packing simulation program that could make a packed bed of spherical particles having particle size distribution. In addition, the influence of the particle shape of the actual powder on the packing density was quantitatively analyzed. The predicted packing densities corresponded well to the actual data.

  • PDF

고온 폐열회수장치 튜브의 크리프 파단특성 평가 (Creep Rupture Life Prediction of High Temperature HRSG Tubes)

  • 김우중;김재훈;장중철;김범수;이기천
    • 한국안전학회지
    • /
    • 제28권3호
    • /
    • pp.6-10
    • /
    • 2013
  • The Heat Recovery Steam Generator(HRSG) is a device recycling the exhaust gas of gas turbine in combined power and chemical plants. Since service temperatures was very high, the damage of HRSG tubes intensively occurred in superheater and reheater. The aim of this paper is to determine life and hardness relationship that addresses creep-rupture test and creep-interrupt test in modified 9Cr-1Mo steel. The measured life that consists of function of hardness was found to constant tendency.

색차 블록의 화면 내 예측에서의 정확한 각도 방향 적용 (Accurate Angular Direction for Intra Prediction of Chroma Blocks)

  • 김범윤;박지윤;전병우
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2020년도 추계학술대회
    • /
    • pp.158-159
    • /
    • 2020
  • 초 고화질 영상의 등장과 동영상 스트리밍 서비스의 폭발적인 이용증가로 고품질로 영상을 압축할 수 있는 기술의 중요성이 크게 증가하고 있다. 본 논문에서는 VVC 차세대 비디오 부호화기술에 따라 색차 블록의 화면 내 예측 시 정확한 예측각도를 측정하여 압축 성능을 더욱 향상시키는 방법을 연구하였다. 실험결과, 기존 VVC 방법 대비 BDBR(Bjontegaard Delta Bit Rate) 측면에서 AI(All Intra) 조건의 경우, Y(-0.01%), Cb(-0.07%), Cr(-0.05%)의 성능변화를 얻을 수 있었다.

  • PDF

채널 간 선택적 참조 라인 공유 방법 (Selective Reference Line Sharing for Chroma Intra Prediction)

  • 이유진;박지윤;전병우
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2022년도 하계학술대회
    • /
    • pp.197-198
    • /
    • 2022
  • Versatile Video Coding (VVC)는 차세대 동영상 압축 표준화 과정에서 다수의 부호화 기술을 새롭게 채택하였는데, 이중 Multiple Reference Lines (MRL)을 포함한 일부 기술은 휘도 채널에만 적용될 수 있으며 색차 성분에 대해서는 적용이 고려되지 않는다. 본 논문은 VVC 에서 휘도 채널에만 적용되는 MRL 기술을 색차 채널로 확장하기 위하여, DM(Derived Mode)을 사용하는 색차 블록의 대응 휘도 블록이 MRL 을 사용하는 경우에 해당 참조 라인을 선택적으로 공유하여 색차 블록이 화면 내 예측에 복수개의 참조 라인을 고려하여 선택할 수 있도록 하는 방법을 제안한다. 실험 결과, VVC Test Model (VTM) 15.0 대비 Cb, Cr 성분 각각 -0.09%, -0.05%의 성능 향상을 보인다.

  • PDF

고 Cr-Mo강의 수정멱수법칙을 이용한 W.M. 크리프 수명예측 (Creep life Prediction for W.M. of High Cr-Mo Steel using Modified Power-law)

  • 안종교;유효선;양성모;강희용
    • 대한기계학회논문집A
    • /
    • 제32권11호
    • /
    • pp.951-956
    • /
    • 2008
  • The high temperature creep properties of the generating plant's high temperature tube, pipe and header and such are very significant in accordance with long-time exposure to the high temperature and pressure environment. Not only this, but as the welding procedure is compulsory for the cohesion of components, the creep properties regarding the local microstructures of steel weldment are very important. In order to understand the creep properties regarding the local microstructures of steel weldment, the SP-Creep test which is easy to get sample from the field component was conducted. The local microstructure of steel weldment, that is, W.M. and B.M.'s microstructures were observed using the SEM. The rupture time of W.M. was longer as 110 % averagely in a same condition, which is the consequence of the difference of the microstructure. Each lethargy coefficient of B.M. and W.M. is evaluated by the relation among the temperature, load and the rupture time from SP-Creep Test. The life estimation equation can be induced by the transformation of Power-law. B.M. and W.M. for each $550\;^{\circ}C$ and $575\;^{\circ}C$, the very similar to normal temperature of the domestic thermal power generation in working, are estimated.

The associations of Urinary Neutrophil Gelatinase-associated Lipocalin (NGAL) and Liver-type Fatty Acid-binding Protein (L-FABP) Levels with Hematuria in Children and Adolescents

  • Choi, Youngmin;Bin, Joong Hyun;Cho, Kyoung Soon;Lee, Juyoung;Suh, Jin-Soon
    • Childhood Kidney Diseases
    • /
    • 제23권2호
    • /
    • pp.105-110
    • /
    • 2019
  • Purpose: We sought to determine associations of urinary neutrophil gelatinase-associated lipocalin (NGAL) and liver-type fatty acid-binding protein (L-FABP), known markers of renal injury, with hematuria in children and adolescents. Methods: A total of 112 urine samples from 72 patients aged 2 to 18 years with hematuria were enrolled in this study. Urinary concentrations of NGAL and L-FABP were measured by ELISA and compared between subjects with and without proteinuria and between subjects with and without glomerulonephritis diagnosed by renal biopsy. Results: Urinary concentrations of NGAL and L-FABP/creatinine (Cr) in subjects with proteinuria were not significantly different from those in subjects without proteinuria. They were not significant different between subjects with and without glomerulonephritis either. However, both concentrations of urinary NGAL and L-FABP/Cr were positively associated with urinary protein to creatinine ratio. Their levels had a tendency to be increased when proteinuria developed at later visits in subjects with hematuria only at initial visits. Conclusion: Monitoring urinary NGAL and L-FABP levels in addition to conventional risk factors such as proteinuria and serum creatinine might improve the prediction of renal injury in pediatric patients with hematuria.

해수담수화 농축수 처리를 위한 한국 해수 특성 및 결정화 연구 (Study on Korean Seawater Characterization and Crystallization for Seawater Desalination Brine Treatment)

  • 정상현;;변시영;이지은
    • 한국물환경학회지
    • /
    • 제37권6호
    • /
    • pp.442-448
    • /
    • 2021
  • Seawater desalination is a technology through which salt and other constituents are removed from seawater to produce fresh water. While a significant amount of fresh water is produced, the desalination process is limited by the generation of concentrated brine with a higher salinity than seawater; this imposes environmental and economic problems. In this study, characteristics of seawater from three different locations in South Korea were analyzed to evaluate the feasibility of crystallization to seawater desalination. Organic and inorganic substances participating in crystal formation during concentration were identified. Then, prediction and economic feasibility analysis were conducted on the actual water flux and obtainable salt resources (i.e. Na2SO4) using membrane distillation and energy-saving crystallizer based on multi-stage flash (MSF-Cr). The seawater showed a rather low salinity (29.9~34.4 g/L) and different composition ratios depending on the location. At high concentrations, it was possible to observe the participation of dissolved organic matter and various ionic substances in crystalization. When crystallized, materials capable of forming various crystals are expected. However, it seems that different salt concentrations should be considered for each location. When the model developed using the Aspen Plus modular was applied in Korean seawater conditions, relatively high economic feasibility was confirmed in the MSF-Cr. The results of this study will help solve the environmental and economic problems of concentrated brine from seawater desalination.

인장하중을 받는 아스팔트 혼합물의 점탄소성 모형의 개발 (Development of ViscoElastoPlastic Continuum Damage (VEPCD) Model for Response Prediction of HMAs under Tensile Loading)

  • ;;서영국;이광호
    • 대한토목학회논문집
    • /
    • 제28권1D호
    • /
    • pp.45-55
    • /
    • 2008
  • 아스팔트 혼합물의 거동을 정확하게 예측하기 위하여 점탄소성 연속체 손상모형(이하 점탄소성 모형)을 개발하였다. 본 논문에서는 인장조건에서 점탄소성 모형의 개발과 4가지 혼합물(일반 밀입도, SBS, CR-TB, Terpolymer)을 이용한 모형의 검증과정을 다루고 있다. 모형 개발을 위해서 실내시험으로 측정한 아스팔트 혼합물의 전체 응답을 점탄성과 점소성 성분으로 구분하여 분석하였다. 점탄성 연속체 손상모형으로는 미세균열이 지배적인 상태에서 아스팔트 혼합물의 시간 의존적 거동을 해석하고, 고온 혹은 저속 하중 조건에서 발생한 영구변형(시간 종속과 비종속 성분을 모두 포함)은 점소성 모형으로 해석하였다. 변형률 분해 원리에 근거하여 각각의 모형을 통합하여 점탄소성 연속체 손상모형(VEPCD)을 개발하였다. 모형의 변수 결정을 위해서 직접인장시험을 수행하고 각각의 혼합물에 대한 선형 점탄성은 동탄성계수와 시간-온도 전이계수 그리고 위상각의 주곡선으로 정의하였다. 개발된 점탄소성 모형의 예측 성능을 평가하기 위하여 두 종류의 실내시험 실시하고 그 결과를 분석하였다 : 1) 단일 변형률 인장 시험, 2) 임의 하중조건을 모사한 피로 시험.

대장암 환자의 수술 전 항암화학요법의 반응을 CT 종양퇴행등급을 이용한 반응 예측: 예비 연구 (Response Prediction after Neoadjuvant Chemotherapy for Colon Cancer Using CT Tumor Regression Grade: A Preliminary Study)

  • 제환주;조승현;오현석;서안나;박병건;이소미;김시형;김갑철;염헌규;최규석
    • 대한영상의학회지
    • /
    • 제84권5호
    • /
    • pp.1094-1109
    • /
    • 2023
  • 목적 대장암 환자에서 선행화학요법(neoadjuvant chemotherapy; 이하 NAC)의 반응을 CT를 이용한 종양퇴행등급(CT-based tumor regression grade; 이하 ctTRG)으로 예측할 수 있는지를 알아보고자 한 연구이다. 대상과 방법 총 53명을 대상으로 NAC 전후 종양의 길이, 두께, 장벽의 패턴과 모양으로 ctTRG를 정하고 부피도 측정했다. 병리 종양퇴행등급(pathologic TRG; 이하 pTRG)을 반응 평가의 기준으로 ctTRG와 연관성을 평가했다. Rödel's TRG 2, 3 그리고 4를 반응군으로 분류하였다. ctTRG와 부피변화로 반응군 및 병리완전퇴행(pathologic complete remission; 이하 pCR)을 예측하는 성능을 비교하였다. 결과 ctTRG와 pTRG는 moderate의 연관성을 보였다(ρ = -0.540). 관찰자간 신뢰도는 substantial으로 보였다(weighted κ = 0.672). 반응군을 예측하는데 ctTRG와 volume 변화의 성능은 유의미한 차이를 보이지 않았다(ctTRG의 Az = 0.749, 반응기준: ctTRG ≤ 3, volume 변화의 Az = 0.794, 반응기준: ≤ -27.1%, p = 0.53). pCR을 예측하는 두 방법 간의 성능도 차이가 없었다(p = 0.447). 결론 ctTRG는 대장암에 NAC 후 반응을 예측할 수 있었고, 그 성능은 종양부피변화 방법과 차이가 없었다.