• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.144-154
• /
• 2018

Metabolic disease is associated with abdominal obesity, high blood pressure, and dyslipidemia. Physical activity has beneficial effects on a variety of diseases. This study examined the relationship between metabolic diseases and physical activity according to age. Among a total of 7,295 subjects, the data from 382 individuals in the normal group and 1,525 persons in the metabolic disease group were analyzed. The data were analyzed statistically by one-way ANOVA, the Pearson's correlation coefficient, and multiple regression analysis. The levels of hemoglobin (HB), hematocrit (HCT), and creatinine (CR), were elevated when a high-intensity physical activity was performed, but they were reduced when a low-intensity physical activity was performed in the normal group aged 10~29 years and the metabolic disease group aged 50~69 years. In the normal group and metabolic disease group aged 30~49 years, the level of high density lipoprotein cholesterol (HDL-C) was elevated when high-intensity physical activity was conducted, whereas it was reduced when low-intensity physical activity was performed. No difference in the level of HDL-C depending on age and exercise intensity was observed in the normal group; the level of HDL-C decreased with age and increased with exercise intensity in the metabolic disease group. Physical activity has different effects in metabolic disease depending on age.

• Radiation Oncology Journal
• /
• v.29 no.1
• /
• pp.20-27
• /
• 2011

Purpose: This study was designed to evaluate the results of local control, survival rate, prognostic factors, and failure pattern in locally advanced esophageal cancer. Materials and Methods: We retrospectively studied 50 patients with locally advanced esophageal cancer treated with concurrent chemoradiotherapy at Keimyung University Dongsan Medical Center from June of 1999 to August of 2008. Seven patients with inappropriate data were excluded, and 43 patients were analyzed. There were 39 males and four female patients ranging in age from 43 to 78 years (median, 63 years). There were seven patients with stage IIA and 36 with stage III. Irradiation from 46 Gy to 63 Gy (median, 54 Gy) was carried out 5 days per week, 1.8 Gy once a day. There were eight patients with neo-adjuvant chemotherapy, and we mostly used 5-fluorouracil, cisplatin with 3 cycles for concurrent chemotherapy. The range of follow up periods was from 2 to 82 months (median, 15.5). Results: There were nine patients that exhibited a cornplete response, 23 that exhibited a partial response, 9 that exhibited no response, and 2 that exhibited disease progression. The median survival time was 15 months. Two-year and 5-year survival rates were 36.5% and 17.3%, respectively. Two-year and 5-year disease-free survival rates were 32.4% and 16%, respectively. Treatment failure occurred in 22 patients (51.2%). Patterns of failure were categorized as local failure in 18 patients and distant metastasis in four patients. In a univariate analysis for prognostic factors related to overall survival and disease-free survival, the hemoglobin levels during chemoradiotherapy (${\geq}$ 12 vs. <12, p=0.02(p=0.1) and the response to the treatments (CR/PR vs. NR/PD, p=0.002/p< 0.0001) were statistically significant. In a multivariate analysis, only response to the treatments was revealed to be statistically significant. There was no statistical significance associated with patient age, gender, disease stage, T-stage, smoking history, tumor location, or neo-adjuvant chemotherapy. Conclusion: Our survival rate was similar to those of other institutions. Local recurrence was the main reason for failure. It is suggested that further prospective studies should be performed to improve local control.

• Korean Journal of Plant Resources
• /
• v.35 no.1
• /
• pp.134-167
• /
• 2022

This study conducted monitoring of flora and vegetation in order to utilize basic data for forest wetland conservation targeting outstanding forest wetlands located in the eastern part of Jeonnam Province. The survey was carried out for a total of 54 times from May 2020 to October 2020, 1-2 times each for each season. The vascular plants of outstanding forest wetland in eastern Jeollanam-do were 93 families, 251 genera, 336 species, 5 subspecies, 47 varieties, 7 forma, and a total of 395 taxa. This was about 8.5% of 4,641 species of vascular plants in Korea Peninsula. A total of 8 taxa and 12 taxa were identified Korea endemic plants and rare plants respectively. A total of 68 taxa and 19 taxa of floristic target plants and invasive alien plants were classified each. the naturalized Index was 4.83% and the urbanized Index was 5.90%. As a result of the analysis by wetland type of the forest wetlands, obligate upland plants were the highest in the forest wetlands in the eastern Jeonnam province (61.4%), with unclassified wetland plants 19.1%, facultative wetland plants 8.2%, and obligate wetland plants 4.6%, facultative upland plants 4.5%, and facultative plants 2.3% were confirmed in the order.