• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.251-251
• /
• 2017

This study was performed to select the soil covering materials for winter safety of Cynanchum wilfordii Hemsley and to investigate the effect on the growth after overwinter. Soil covering materials such as vinyl, rice straw, lagging cover, vinyl+lagging cover, and non-covering were investigated how effect on overwintering rate, growth and yield of Cynanchum wilfordii Hemsley. In changes of soil temperature according to the soil covering materials, non-covering treatment was recorded the highest to $26.7^{\circ}C$, and lagging cover and rice straw showed little change of soil temperature with 9.2 and $9.3^{\circ}C$, respectively. Regrowth rates of early growth after overwinter were lowered in the order as rice straw > vinly+lagging cover > lagging cover > vinyl > non-covering. From the above-ground growth by soil covering materials, vine length showed similar growth in all treatments except vinyl covering and stem diameter exhibited the thicker pattern in vinyl and lagging cover, and there was no significant difference among treatments in number of branch. Flowering period is recorded July 30 in all treatments and ripening period is October 16. Yield of seed production is showed the best in vinyl+lagging cover with $25g/m^2$. Root weight and root length for subterranean growth showed no significant differences among all treatments. Yield is produced the highest in vinyl+lagging cover with 433kg/10a and the next to lagging cover with 431kg/10a. In comparison with incomes, lagging cover earned to 9,882 thousand won/10a, showed the effect on income enlargement to 21%, compare to that of the non-covering.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.54-61
• /
• 2000

Covering rate, visual rating and sod development were evaluated under three natural fiber materials with Phragmites spp. when over a plastic sheet. The results were as follows. (1) The last covering rate was high on jute net, coir mat and on Miscanthus sacchariflorus, respectively while the early covering rate was high on coir mat and on Miscanthus sinensis+perennial ryegrass. (2) The early growth was good on perennial ryegrass but the covering rate gradually turned poor because of summer drought. (3) Sod was highly developed on Phragmites japonica, Miscanthus sacchariflorus and Miscanthus sinensis compared with other species and mixtures. (4) The covering rate and visual rating were high on natural fiber materials such as coir mat and jute net when compared with on natural fiber materials such as none treatment plots. (5) The natural fibers materials on Phragmites spp. and Miscanthus spp. were effect on sod establishment. Sod coir mat was highly established. (6) The carpet-type sod was best developed on the coir mat.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.5-8
• /
• 2006

High strength concrete has been increasingly used in high rue building and it is very obvious re consider fire resistance performance of that. Unlike the normal strength concrete, high strength concrete in sudden elevating temperature at fire is susceptible to spalling with severe explosion and surface split, due to high density of concrete. In order to endure the spalling, inner space temperature of concrete should be control less than certain point. Therefore this study investigated the influence of covering materials on high strength concrete finishing spray-on materials of fiber composite spray mortar(FCSM). Both polypropylene(PP) and polyvinyl alcohol(PVA) fiber were used in this test. Test showed that concrete, covering 18mm mortar containing PVA fiber and confining metal lath 2.3mm thickness, decreased 50% of main bar ambient temperature. compared with control concrete. In addition, concrete covering 18mm mortar without fiber caused falling of covering materials and then it was exposed in elevating temperature. As a result, spatting of the concrete occurred same as control concrete. However, concrete covering spray-on mortar containing PVA or PP fiber resisted spatting occurrence.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.291-294
• /
• 2011

We studies a model for management of pepper anthracnose based covering method and spraying system in field. 1. Among 82 organic fungicides, 42 materials showed most effective inhibition against mycelia growth of the Colletotrichum acutatum in vitro. 23 formulated biocontrol agents were chosen to control the disease from 42 biocontrol agents in greenhouse. In the end, five kinds (2 plant extracts, 2 biopesiticides, 1 Bordeaux mixture) were selected from 23 materials in the field. 2. The mulching materials of bed covering in fruit season were thin non-woven fabric sheet and black plastic. The use of a fabric sheet was reduced the spread of anthracnose as compared to the plastic covering. 3. The application with the chosen materials was reduced 34% of anthracnose for 7 times sprays to planting 70 days as compared to the untreated control. In yield, nonwoven fabric sheet with formulated biopesticides was increased 17% than black plastic. 4. This result indicated that the developed biocontrol strategy could be an effective and economic crop protection system in organic pepper cultivation field.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.4
• /
• pp.129-134
• /
• 2003

The purpose of this study is to evaluate efficiency by the Life Cycle Cost(LCC) analysis of floor covering materials for remodeling. This study has been performed as a case study. The LCC analysis is a technique which takes account into both initial-future costs and benefits of an investment over some period of time. LCC is important in commercial decision making because it provides improved assessment of the living-term cost effectiveness of construction projects as well as alternative economic methods that focus on initial costs. For LCC analysis and comparison, the present value technique is used. The results of this study are summarized as follows; (1) A LCC analysis model of floor covering materials is suggested through a case study (2) As a result of LCC case study, the type of sheet is analysed more economical than that of tile in floor covering materials.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.234-237
• /
• 2011

This study was carried out to investigate the effect of soil covering materials such as rice bran, rice hull and saw dust on garlic growth through a field experiment in wintertime. Rice bran was the smallest in term of particle size, but it recorded the highest level of bulk density. The missing plant rate after winter season was relatively high, 59.3%, and that of soil covering materials stood at the low level of 10%. Other growth factors recorded the highest level during application of rice bran. In terms of chemical properties of soil-covering materials, rice bran recorded the highest level of 1.84, 2.34 and 0.16% in the content of N, P, and K, respectively. The subsoil temperature was higher by application of rice bran as compared to that of other materials which stood at the lowest temperature ($-9^{\circ}C$).

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.88-92
• /
• 2002

The study was conducted to estimate stimulation of plant growth of blue and red leaf lettuce (Lactuca sativa L.) as affected by covering methods with vinyl materials containing concentrated PO film. Plants were grown in direct, direct and tunnel, and tunnel covering with 'Pasraido materials' from October 13 to 31. With the covering mean air temperature, soil temperature, leaf temperature and relative humidity remarkedly increased. Higher temperature was observed in the order of direct and tunnel, direct, tunnel covering and the control. Photosynthetic photon flux (PPF, $\mu$mol m$^{-2}$ . s$^{-1}$ ) was observed in reverse order of temperature. Concentration of $CO_2$ was higher during night than during day under the light. Accumulation of highest $CO_2$ at night was obtained from direct coverings followed by direct and tunnel, tunnel covering and the control. Plant height, leaf number and leaf area of blue and red lettuces were stimulated by direct covering. However, there was no significant difference.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.1
• /
• pp.99-107
• /
• 2013

This study was conducted to evaluate the effect of soil covering depth and vegetation base materials on the competition between Pinus densiflora Siebold & Zucc. and Lespedeza cyrtobotrya Miq., which were grown in an abandoned coal mine land for three years after seeding, by comparing their growth and stem density. The study site was consisted of sub-plots with four different soil covering depths (0cm, 10cm, 20cm, and 30cm) and four different compounds of vegetation base materials (peat moss (control), soil conditioner+peat moss (S+P), erosion control material+peat moss (E+P), and soil conditioner+erosion control material+peat moss (S+E+P)). Results of this study showed opposite pattern between P. densiflora and L. cyrtobotrya with different soil covering depth and compounds of vegetation base materials in general. P. densiflora showed the highest growth and stem density in plots with 10cm and 0cm depths of soil covering, respectively, while the lowest was shown in plots with 20cm depth of soil covering. In contrast, L. cyrtobotrya showed the highest growth and stem density in plots with 20cm depth of soil covering, while the lowest was shown in plots with 0cm depth of soil covering. In case of vegetation base materials, P. densiflora showed the highest growth and stem density in control plots and plots treated with S+P, respectively, while the lowest was shown in plots with S+E+P treatment. On the other hand, L. cyrtobotrya showed the highest growth and stem density in plots treated with S+E+P, while the lowest was shown in control plots. These results suggested the competition between two plants as a major cause of opposite patterns, which is induced by the suppressed growth and stem density of P. densiflora by fast growing L. cyrtobotrya. Despite the suppression of L. cyrtobotrya on P. densiflora, L. cyrtobotrya can play a positive role in improving soil quality, and thus it would be more desirable for restoring abandoned coal mine land to manage the growth of L. cyrtobotrya periodically, rather than eliminate them.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.120-130
• /
• 2021

The condition of covering process using thermoplastic polyetherester elastomeric fibers(TPEE) was established. Two types of core yarn(TPEE, Spandex) and one type of effect yarn(PET) were used as materials to confirm the change in physical properties of covering yarn under various covering conditions. In addition, the effects of the treatment temperature on the elongation at break of covering yarn after heat treatment was analyzed. Through this analysis, it was confirmed that the elastic recovery of TPEE which is used as the core yarn was increased with the draw ratio, but decreases when it exceeds 1:2.5. And the elongation at break of the covering yarn could be increased by increasing the twist per meter of it. Additionally, it was confirmed that the elastic recovery of TPEE which is used as a core yarn, could be increased by applying heat treatment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.6
• /
• pp.61-67
• /
• 2012

This study was conducted to evaluate the effects of soil covering and vegetation base materials implementation on the growth of Lespedeza cyrtobotrya Miq. in abandoned coal mine land. We compared the biomass of L. cyrtobotrya at the study plots of four different soil covering depth (control, 10cm, 20cm, and 30cm) and four different compounds of vegetation base materials composed of soil conditioner (S), erosion control (E), and peat moss (P) (control, S+P, E+P, and S+E+P). The result showed that the biomass of L. cyrtobotrya was higher in the study plots implemented with soil covering than control plot, although the increase in biomass was not constant with soil covering depth. In case of the vegetation base materials treatments, the biomass was highest in S+E+P plot, and S+P and E+P plots showed higher biomass than control plot.